Q-terra Softpeeling (carbon Peeling)

Transcript

GURO-DONG, BYOKSAN 3 CHA 105, 271 DIGITAL RO, GURO-GU, SEOUL, KOREA TEL 82 2 2025 1151 FAX 82 2 2025 1154 E-MAIL :[email protected] Name of goods  Model :Q-TERRA Q-SWITCHED Nd:YAG LASER SYSTEM Main Display -Specification Wavelength Pulse Duration Pulse Energy 1064 / 532nm 5 – 6ns 1.8J Double-Pulse 1064nm 532nm 500mJ Quasi-Long(Genesis mode) 2.3J Pulse Duration:330us Repetition Rate Spot Size 1-10 Hz 1-10 mm, Zoom Handpiece 7mm, Collimation 7m*7mm, Fractional Features of competitive advantages             It is designed ergonomically. It is possible to perform a precise treatment only by the handling of the auto zoom hand piece. It is upgraded to feature a homogenous beam profile The state-of-the-art beam mode is now employed (Top hat Mode). A soft peeling is possible to bring out a skin whitening effect. It is cost-efficient in its maintenance and is of better quality than those of other competitors. The treated spot is quickly recovered, it consumes less time to perform an operation, and it has no adverse effects. The short pulse width can reduce pain during the treatment. The equipment of a latest cooling system enables a long use. A shutter device is equipped inside for safety. The equipment of a guide beam enables operator to radiate easily the laser beam on the spot to be treated. Its handling is simple and easy. V.R.M Mode Multi Mode energy energy Beam shape Beam shape BEAM MODE Gaussian mode Top hat mode(Q-TERRA) energy energy Beam shape Beam shape Explanation of Dual pulse 1.8J Q-TERRA supports to activate consecutive dual pulse and maximum energy of 1.8J (Normal mode) is available * (Dual pulse)*10HZ = Practically 20Hz d/t Dual pulse ◆ Q-TERRA with 10 Hz provides fast treatment * It provides easier and faster treatment with larger spot. ◆ APPLICATIONS          Tattoos Soft peeling Vascular lesion removal Nevus of ota Lentiginosis Freckle Wrinkle Cafe au lait Tattoo on eye brow Accessories ①Handpiece ③Carbon cream ②Protective goggles ④ eye shield what is softpeeling ★summary  As exclusive for peeling, Q-TERRA softpeeling is a particular laserpeeling method, spreading the manufactured carbon cream and making use of 1064 wavelength with short pulse (5-6ns). ★effect  ① Lighting Q-switch laser on the skin in order, it normalizes the overkeratinization by removing the horny layer of the cuticle  ② Promoting regrowth of collagenous fiber and elastic fiber of the dermis  ③ improving the skin aging by removing keratin and impurities on the surface of the skin.  ④ at the same time to make the melasma and the mote thin, it is effectively used to fine wrinkles. acnes, and pore contraction. Q-TERRA softpeeling (Carbon peeling) process ★ At the intervals of 2-4 weeks, it is a treatment method concentrating the laser ray into the deep skin to stimulate and induce the collagen layers by performing 3-4 times repeatedly.  ▶1st: spreading the fine particle carbon lotion on the whole treatment area, clean the remaining carbon cream in 10-15 minutes.  ▶2nd: after adopting an optimum energy, shoot Q-TERRA laser for 2-3 passes equally on the carbon cream sprayed area, so that thermal effect of the carbon cream absorbing laser can be delivered into the deep skin.  ▶3rd : the process like this is to help young and new skin regrow because the skin horny layer was equally removed through the instant explosion of the carbon particle.  ▶4th: the area with wrinkles or expanded pores produces additional remodeling effect of the inner skin by repeated lighting through enhancing the parameter. Procedure of soft peeling (Normal mode)  ①Wear protective goggles ②Wear carbon cream  ④Perform a treatment ⑤Complete the treatment ③Wait for about 10 minutes after applying the cream ⑥ Apply a mask pack Applications of soft peeling       When you want to maintain an elastic skin When you want to have a bright and clear skin When you want to remove liver spots, fine wrinkles, lentigos etc When you want to tighten the skin pores When you want a treatment that brings out a quicker effect. *The soft peeling can maintain its effects for about a month, with variations from the types of the skin. The treatment time is very short; so a patient can go back to normal daily routine next day and also wear makeup. HOW TO USE LONG PULSE MODE                    ◆ How to use genesis Mode. 1) Before genesis mode use , please put carbon cream on the face superficially and wait upto 5-10 minute to dry the carbon slightly. 2) genesis mode recommend to use as 7 mm – 8mm spot size with approx. 2.0 - 2.5 J/cm 2 and laser beam need to delivered in a single pass, minimal overlapping to the skin which is covered by carbon cream . The reason of single pass or minimal overlapping is to prevent excessive heat transferring to the skin. The pulse duration of genesis mode is 330 us and it can make heating carbon creams and it will make thermal effect in the skin and skin cell re-generation. Through these effectiveness can also improve the appearance of acne , acne scar and wrinkles. ◆ Remark A) This genesis mode should never be used for the treatment of melasma due to heat will exacerbate pigmentation and make lesions more darker. B) After finish the treatment genesis mode beam, please change “Normal Mode (1064nm)” finally and please remove of carbon cream completely through “Normal Mode (1064nm). We recommend you to use Normal Mode with 7-10 mm spot size (fluence 1.82-1.99j/㎠) Treatment parameters (Genesis mode +normal mode) Treatment parameters(1064,532) Lesion Wave length Energy(Display) Ota’s nevus 1064nm Energy:400-600mj H.P Spot size(energy) 2mm:12.74-19.11j/㎠ 3mm:5.66-8.49j/㎠ Frequency:2-5HZ Blue Nevus 1064nm Energy:400-600mj H.P Spot size(energy) 2mm:12.74-19.11j/㎠ 3mm:5.66-8.49j/㎠ Frequency:2-5HZ Tattoo on eye brow 1064nm Energy:300-400mj H.P Spot size(energy) 2mm:9.55-12.74j/㎠ 3mm:4.25-5.66j/㎠ Frequency:4-5HZ Blue & black tattoo 1064nm Energy:400-600mj H.P Spot size(energy) 2mm:12.74-19.11j/㎠ 3mm:5.66-8.49j/㎠ Frequency:2-5HZ PICTURE Lesion Wave length Energy(Display) Soft peeling (Normal mode) Fine Wrinkle, skin rejuvenation etc. 1064nm Energy:600-800mj H.P Spot size(energy) 6mm:2.12-2.83j/㎠ 10mm:0.76-1.02j/㎠ Frequency:4-6HZ Red tattoo 532nm Energy:50-100mj H.P Spot size(energy) 3mm:0.71-1.42j/㎠ 4mm:0.40-0.80j/㎠ Frequency:2-5HZ Epidermal pigmented lesion (freckle, melasma, lentigo, black lentigo) 532nm Energy:50-100mj H.P Spot size(energy) 3mm:0.71-1.42j/㎠ 4mm:0.40-0.80j/㎠ Frequency:2-5HZ Cafe au lait 532nm Energy:50-100mj H.P Spot size(energy) 3mm:0.71-1.42j/㎠ 4mm:0.40-0.80j/㎠ Frequency:2-5HZ PICTURE  Treatment parameter can be differed from the upper mentioned ones due to tissue characteristic of each personal (or ethnics). upper values are just showing generally recommended parameters. Therefore, while inexperienced doctors operations, they are recommended that the operators should start each treatment with minimum values of upper parameters.  Cycle of treatment Lesion Number of treatment Ota’s nevus 3-5 Red nevus 3-5 Tattoo on eye brow 1-2 Blue & black tattoo 4-6 Soft peeling(Carbon peeling) 3-4 Red tattoo 4-6 Epidermal pigmented lesion (freckle, melasma, lentigo, black lentigo) 2-3 Caf’e aulait 3-4 Fractional Handpiece High treatment efficacy by deep laser penetrating Minimize , Hypo-pigmentation and side effect Epidermis sparing during High fluence treatment 49 dots in 10 by 10mm spot size Before & AFTER *Acne This patient got Carbon peeling with 1064nm, Nomal Mode, Energy 10mm:0.764j/㎠ Frequency:5Hz one time. The right picture is an operation result that acne was disappeared after 10 days. Before & AFTER *Pigmentation These pictures are the surgical operation result of an patient who has pigmentation got operation with energy :50mj spot size:4mm:0.398j/㎠,Frequency:3Hz and 532nm. The right picture is an appearance of patient after 15dyas. Before & AFTER *Winkles These pictures are the surgical operation result of an patient who has winkles got Carbon peeling. Every 3weeks the patient got two operations with Energy:800mj,H.P Spot size(energy),10mm:1.019j/㎠,Frequency:6Hz and parameter was set 1064mm. It is good for operated patient to apply serum after operation. Before & AFTER * Inflammatory acne These pictures are the surgical operation result of an patient who has inflammatory acne got operation with Long pulse mode + Normal mode at the same time. Firstly, applied carbon cream to skin , and then used energy:800mj spot size:7mm:2.08j/ ㎠,Frequency:2Hz and 1064nm long pulse mod. Secondly, changed from 1064nm long pulse mode to 1064nm Normal mode and then used energy:1000mj spot size:10mm:1.99j/㎠,Frequency:5Hz Before & AFTER *Freckle These pictures are the surgical operation result of an patient who has freckles got operation with energy:50mj spot size:4mm:0.398j/㎠,Frequency:2Hz and 532nm. The patient applied serum to skin consistently so skin tone got brighter and pigmentation was reduced.