Transcript
Q2 Illuminator Red – The gaming case with lots of features for a small purse!
Another highlight besides the well-thought-out cooling concept of the Q2 Illuminator Red is the easy and quick installation of all components. Serial guide screws ensure an easy mounting of the internal 3.5" HDDs. Two separated mounting options of 2.5" HDDs complete the variety of the case. Due to the combination of intelligent cable management and space for extension cards with a length of up to 37cm, the Q2 Illuminator Red becomes a space wonder. The two USB 3.0- and USB 2.0- connectors along with the serial 2in1 Card-Reader (MicroSD and SD) on the top of the case offer a fast and easy handling and complete the package.
Errors excepted. No warranty for the correctness of the information State: 14.06.2016
The Q2 Illuminator Red convinces due to its spacious and robust design and has a variety of features. The PSU can be mounted at the bottom of the case and is protected by removable dust filters. The three serial 120mm fans with red LEDs behind the translucent front panel, in the rear of the case and in the cap ensure an optimal cooling of your components. Additional fans can be mounted in the front, on the top and in the window side panel.
Specifications Motherboard Max. Drive Bays
ATX, µATX 5.25" external: 1 3.5" external: 0 3.5" internal: 4 2.5" internal: 2 USB 3.0: 2 USB 2.0: 1 Card-Reader: 1 Microphone: 1 Speaker: 1 Front: 2x 120mm
Front Connectors
Cooling System
(1x serial, red LEDs, Molex-connector, serial)
Rear: 1x 120mm (red LEDs, Molex-connector, serial)
Top: 2x 120mm (red LEDs, Molex-connector, serial)
Side panel: 1x 120mm Shipping Unit: 1 Piece Packing Unit: 18 Pieces Guarantee and Warranty Case 24 Months Warranty Article Number 88881261 EAN-Code 4260133129993 Scope of Delivery Screw set Features Side panel with window Removable dust filters at the bottom Guide srews for internal mounting of 3,5" HDDs Serial SD- and Micro-SD - Card-Reader 3x 120mm fans with red LEDs serial in the front, cap and rear Translucent front panel and top Separated SSD mounting option at the bottom PSU mounting at the bottom Intelligent cable management Space for cards with a length of up to 37cm Side panels with thumbscrews USB 3.0, USB 2.0, card reader and Audio plug internal as block connectors Stands HD-Audio Packing Units
Power Supply Connector
Cage
Case
Height
410mm
490mm
500mm
Width
185mm
210mm
250mm
Depth
410mm
465mm
525mm
Weight (net): 3,90 kgs Weight (gross): 4,98 kgs
Certification:
Quantity
Max. Length
Mainboard 20+4Pin
-
-
P4 12V 4Pin
-
-
P4/EPS 4+4Pin
-
-
P8 12V 8Pin
-
-
PCI-Express 6+2Pin
-
-
PCI-Express 6Pin
-
-
IDE 4Pin
-
-
S-ATA
-
-
Floppy
-
-
Package
Errors excepted. No warranty for the correctness of the information State: 14.06.2016
Dimensions and Weight
