Preview only show first 10 pages with watermark. For full document please download

Qig Dg-ku8002 V2 - Smartlink Network Systems Ltd

   EMBED

Share

Transcript

BRETON SERIES 2 Port Mini USB KVM Switch With Built In Cables DG-KU8002 USB 2 PORTS V1.0 2012-04-30 Copyright Copyright © 2012. All rights reserved. Company has an on-going policy of upgrading its products and it may be possible that information in this document is not up-to-date. Please check with your local distributors for the latest information. No part of this document can be copied or reproduced in any form without written consent from the company. Trademarks TM DIGISOL is a trademark of Smartlink Network Systems Ltd. All other trademarks are the property of the respective manufacturers. Package Contents The following items should be present in your package: DG-KU8002 2 Port Mini USB KVM Switch with Built In Cables Quick Installation Guide Make sure that the package contains above items. If any of the listed items is damaged or missing, please contact your retailer immediately. Product Overview The DG-KU8002 is a 2 Port Mini USB KVM Switch with Built In Cables. It allows control of up to two computers from a single set of keyboard, monitor and mouse. The compact design and the integrated cables reduces the clutter caused by cables. Product Features Compliant with USB2.0 and USB1.1 Access up to 2 computers from one USB Keyboard & Mouse USB interface for Console and PC side No Software installation is required Supports plug-n-play Resolution up to 1920x1440 with bandwidth of 250MHz Supports Auto Scan Mode, and easy Hot Key control Product View Below shown is the product top view: 6 7 5 4 3 1 Number 1 2 3 4 5 6 7 2 Interface USB Type A HD-15F USB Type A LED Select Button PC1 Cable PC2 Cable Function Connects to a USB Mouse Connects to a Monitor Connects to a USB Keyboard Indicates the status of the PC connected Selects the PC Connects to PC1 Connects to PC2 Installation 1 Connect the USB Mouse to the USB port on the KVM Switch. 2 Connect the Monitor to the KVM Switch using the VGA cable. 3 Connect the USB Keyboard to the USB port on the KVM Switch. 4 Connect the PC to the KVM Switch using the integrated KVM cables. Keyboard Hot Key Sequence The below table shows the hot key sequence Sr. No. Hot Key Sequence Hot Key Function 1 ScrLK + ScrLK + 1 Switch to PC1 2 ScrLK + ScrLK + 2 3 ScrLK + ScrLK + or Switch to next PC 4 ScrLK + ScrLK + or Switch to previous PC 5 ScrLK + ScrLK + S Switch to PC2 Auto-scan mode every 10 sec. This product comes with One Year warranty. For further details about warranty policy and Product Registration, please visit support section of www.digisol.com