Transcript
QP2005
Version 1
DKT QP2005 The receiver is based only on high quality components, which ensures an extremely high reliability. QP2005 is built to operate within very high working temperatures (up to 45 degrees), and can be running continuously 24 hours a day. The receiver has embedded Conax and Viaccess. Furthermore it has 1 CI for the use of Nagravision, Mediaguard, CryptoWorks and others. With the built in watchdog function, the receiver will automatically reboot, if it can not show any video- or audio signal. The receiver has two built in fans, which ensures the optimal air flow through the cabinet. To make the programming as easy as possible, the receiver has a LCD display that can be operated from the front. With 6 navigation keys, and a simple Menu structure, the receiver is very simple to operate. While the receiver is running, the display will show information about; current programmes, the inside temperature in the cabinet, and the time for the last reboot. With a flash in the display, the receiver will indicate if it has been rebooted. With the automatic WSS function (widescreen signalization function) it is possible to see both 4:3 and 16:9 picture formats. 16:9 picture format will be transmitted to 4:3 TV´s in letter format and will be shown on 16:9 TV´s as widescreen.
Features • • • • • • • • •
Front LCD-display Common Interface Approved for Viasat/NDS (VideoGuard) CAM English menu Menu control on front Embedded Conax (CX 112 model) Embedded Conax and Viaccess (VC 112 model) Software update by RS232 Built in watchdog function
Data Link
Temperature control fans Watchdog can be switched off for Smart Card update Picture format 4:3 / 16:9 incl. WSS DVB Subtitling & DVB Tele text (Danish, Swedish, Norwegian, Finnish and Russian) • Tele text via VBI • 19” - for mounting in standard rack • Automatic restart after power failure
Card reader
Main
Side 2
• • • •
Fan
Fan
Display
BNC Video - In
Mono Audio - In
RCA Audio - L + R
LNB Loop
LNB In
Technical data QP2005 C
QP2005 NDS
Tuner & Channel Data
Tuner & Channel Specifications
Data
Specifications
Input Connector Frequency range Input impedance Signal level
Typ-F, 3/8” * 32 NEF-2A 950 to 2100 MHz 75 Ohm -25 to -65 dBm
Input Connector Frequency range Input impedance Signal level
Typ-F, 3/8” * 32 NEF-2A 950 to 2100 MHz 75 Ohm -25 to -65 dBm
LNB Supply
Vertical: + 13V Horizontal: +18V Max. 300mA
LNB Supply
Vertical: + 13V Horizontal: +18V Max. 300mA
22 KHz Tone DiSEqC Control Demodulation Input symbol rate FEC decoder
Frequency: 22+/-4 KHz 1.1 QPSK 1 - 45 MS/s Automatic
22 KHz Tone DiSEqC Control Demodulation Input symbol rate FEC decoder
Frequency: 22+/-4 KHz 1.1 QPSK 1 - 45 MS/s Automatic
MPEG Transport Stream A/V Decoding Data Transport stream Transport stream specification: Profile level Aspect ratio Video resolution Audio decoding Audio mode
MPEG-2 ISO/IEC 13818 MPEG-2 MP@ML 4:3, 16:9 (Letterbox) 720 x 576 MPEG Layer I & II Mono / Stereo
A/V Data In/Out Data Video Out Audio Out RS232
Specifications MPEG-2 ISO/IEC 13818 MPEG-2 MP@ML 4:3, 16:9 (Letterbox) 720 x 576 MPEG Layer I & II Mono / Stereo
A/V Data In/Out
Power Supply Data
Data Transport stream Transport stream specification: Profile level Aspect ratio Video resolution Audio decoding Audio mode
Specifications BNC (CVBS) RCA (R L og Mono) 9 pin D-sub
Input Voltage Type Power consumption Stand by
MPEG Transport Stream A/V Decoding
Specifications
Data Video Out Audio Out RS232
Specifications BNC (CVBS) RCA (R L og Mono) 9 pin D-sub
Power Supply Specifications 190 - 250 VAC, 50 Hz/60 Hz Switch mode 15W 11W
Memory
Data Input Voltage Type Power consumption Stand by
Specifications 190 - 250 VAC, 50 Hz/60 Hz Switch mode 15W 11W
Memory Data
Specifications
Data
Specifications
CPU
Extended 32-bit VL-RISC CPU - 50 MHz clock
CPU
Extended 32-bit VL-RISC CPU - 50 MHz clock
Flash memory
2 Mbyte
Flash memory
2 Mbyte
Physical Specifications Data Size (W x H x D) Weight (net)
Physical Specifications Specifications 440 x 45 x 180mm 2.8 kg
Data Size (W x H x D) Weight (net)
Specifications 440 x 45 x 180mm 2.8 kg
Side 3
DKT A/S was founded in 1977 and is a Danish “state-ofthe-art” supplier of coaxial and optical products to professional CATV operators and installers. As a manufacturer of high quality network equipment for multimedia on HFC networks (Hybrid Fiber Coax), DKT A/S has developed into an international prominent designer of modern CATV equipment. With the COMEGA® line of products, DKT A/S has taken the challenge and made a unique product range whose electrical performance all comply with CENELEC’s highest standards.
Copyright 2006 DANSK KABEL TEKNIK, printed in Denmark In the interest of continuous product development, specifications may change without notice.
Denmark: Fanøvej 6 DK-4060 Kr. Såby Tel.: +45 4646 2626
Finland: Runnarinkuja 3 FIN-60800 Ilmajoki Tel.: +358 6 4245 111
Fax.: +45 4646 2625
Sweden: Axel Danielssons Väg 257 SE-215 82 Malmö Tel.: +46 40 37 47 70
e-mail:
[email protected] COMEGA .com . com Fax.: +46 4037 4779
e-mail:
[email protected] COMEGA .com . com Fax.: +358 6 4245 110
Sweden: Karusellplan 11 SE-126 31 Hägersten Tel.: +46 86 45 09 01
e-mail:
[email protected] COMEGA .com . com Fax.: +46 08-726 82 33
e-mail:
[email protected]
COMEGA .com . com