Qrc-printer Quick Installation Guide_eng_v1.0a

Transcript

Product Overview Installing your Printer QRC-PRINTER Printer Cable Thermal Receipt Printer Power Adapter Quick Installation Guide Side Power Cord HOST PC Printer Front Rear RS-232 RS-232 TOP Specification General Print Method Print Speed Print Life Print Font (ASCII Mode) Graphic Font) Print Resolution Print Font Character Support Character Per Line Effective Print Width Paper Width Paper Roll Diameter Paper Thickness Driver Print Command Receipt Buffer User-Defined NV Flash Interface I/O Interface Cash Drawer Notification Indicator Auto Cutter Paper End Notice Over-Heat Halt-on Protection Others Power Input Color Compliance Weight Dimension (mm) Operating Temperature Operating Humidity Storage Temperature Storage Humidity Bottom Multi I/O Interface (Serial +Ethernet +USB) DC 24V/1A, 6-Wire RJ-11 Printer Unit Power Adaptor USB Paper Width RJ-45 RJ-11 Power Cash Drawer Paper Roll Paper Roll and Paper Roll Holder **Printer Cable RJ-11 Power Cash Drawer Cash Drawer *Power Cord Paper Roll Quick Installation Guide Paper Roll Holder Paper Roll Holder Audio and LED Indicators Partial Yes Yes 24VDC/2.5A (External Adapter: 100~240VAC 50/60Hz) Black / White FCC / CE / WEEE / RoHS 1200g ( without cable ) 174(L) x 144(W) x 124(H) 0°C~45°C 10% ~ 80% RH, non-condensing -10°C~ 60°C 10% ~ 90% RH non-condensing RJ-11 Power Ethernet (RJ-45) Installing the Paper Roll Contents Thermal line printing 250mm/sec 100 Km ANK Font. Font A: 12 x 24 dots, Font B: 9 x 17 dots Chinese Character: 24 x 24 dots 576 dots/line or 512 dots/line International Font, Big 5 Chinese, GB Chinese, Japanese, Korean selectable 48 (Font A) / 64(Font B) 72mm 79.5mm± 0.5mm 83mm 0.06~0.08mm Win 9X/Win ME/Win 2000/ Win 2003/Win NT/Win XP/Win Vista/Win 7/Win 8, compatible with EPSON and SAMSUNG ESC/POS print commands set 128K bytes 128K bytes 256K bytes USB Utility CD * Power Cord is selectable depending on the types of electrical plug. ** Printer cable is selectable depending on the interface required (RS-232, USB, RJ-45 or Parallel). Please refer to the nearest local representatives for further information. Paper Width Guide Installing the Driver of The Printer 1. Place the supplied Utility CD into the CD-ROM drive. DIP Switch Configuration 5. Select the Operating System. 2. Browse the CD and open the folder “Receipt Printer”. 9. Port Setting: Remember to access the properties of your printer (Start>>Printers and Faxes>> and double-click the icon to enter). Make sure the port of printer is correctly configured. To change the setting of the printer manually: 1. Turn off the printer. 2. Remove the protective cover of the DIP Switches. 3. Adjust the DIP switches to configure the printer. Protective Cover 3. Select the subfolder “Driver for Windows” to access the driver suitable for the operating system. DIP Switches (For example: select “Win2000_XP_Vista_7_x32&x64” for Windows XP version). DIP 1 2 3 4 5 6 7&8 6. Select the proper Printer Model Number. Function Paper Cutter Audio Alarm Print Density Two-byte Character Code Character Per Line Cutter with Cash Drawer Baud Rate Setting ON No Yes * Dark *No 42 Yes --- OFF Yes* No Light * Yes 48 * No * OFF* Baud Rate Setting 4. Double click the icon “PRPDRVEN.EXE” to initiate the installation. 19200 (*Default) 7. Printer Interface Setting: Select the communication interface (COM port number or LPT port number). Click “Install” to complete the installation. 9600 115200 38400 Note: For USB Interface Installation Please install the Virtual COM driver before installing the printer driver. Please refer to the Instruction Manual for further information. 8. Click “Finish” to exit the menu. Ver. 1.0 2013