Transcript
FIBER OPTIC TECHNOLOGY CALIBRATION LABORATORY
QSFP Transceivers M40-V85-QP-SR-D The M40-V85-QP-SR-D is designed to operate over multi-mode fiber system using 4x10G channels in 850 nm. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4. The optical transmitter portion of the transceiver incorporates a 4-channel VCSEL (Vertical Cavity Surface Emitting Laser) array, a 4-channel input buffer and laser driver, diagnostic monitors, control and bias blocks. For module control, the control interface incorporates a Two Wire Serial interface of clock and data signals.
Features
Application
High Channel Capacity: 40 Gbps per module Up to 11.1Gbps Data rate per channel Maximum link length of 100m links on OM3 Maximum link length of 150m links on OM4 High Reliability 850nm VCSEL technology Electrically hot-pluggable Digital diagnostic SFF-8436 compliant Case operating temperature range:0°C to 70°C Power dissipation < 1.5 W
40G Ethernet Infiniband QDR Fiber channel
Digital Diagnostics Functions OPTOKON transceivers support the 2-wire serial communication protocol as defined in the QSFP+ MSA, which allows real-time access
to the
following operating parameters: Transceiver temperature Laser bias current Transmitted optical power Received optical power Transceiver supply voltage
Safety and regulatory compliance and standards: Compliant to SFF-8436
Compliant to 802.3ba
RoHS Compliant
ACT_10-14_EN 18/04/2016 is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners. OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability. OPTOKON a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM,
[email protected]
FIBER OPTIC TECHNOLOGY CALIBRATION LABORATORY
Optical characteristics Transmitter Parameter
Symbol
Min
Typ
Max
Unit
POUT λ ER
-7.6 840 3
850
0.5 860
dBm nm dB
Symbol RSENS PSAT ΛC
Min
Typ
Max -9.5 860
Unit dBm dBm nm
Symbol Vcc Icc
Min 3.14
Typ 3.3
Max 3.47 350
Unit V mA
Symbol Rin Vin, pp
Min
Typ 100
Max
VINT
-0.3
Unit Ω mV V
Output Opt. Pwr Optical Wavelength Optical Extinction Ratio
Receiver Parameter Rx Sensitivity Input Saturation Power (Overload) Wavelength Range
2.4 840
Electrical characteristics Parameter Supply Voltage Supply Current
Transmitter Parameter Input differential impedance Differential data input swing Single ended input voltage tolerance
180
1000 4.0
Receiver Parameter Differential data output swing Single-ended output voltage
Symbol Vout,pp tr/tf
Min 300
Typ
-0.3
Max 850 4.0
Unit mV
Max 4 85 70
Unit V °C °C dBm
-0.3
Technical specifications: Parameter Maximum Supply Voltage Storage Temperature Case Operating Temperature Damage threshold
Distance:
Symbol Vcc TS Tcase
Min -0.3 -40 -5 3.4
Typ
Ordering code:
Name
Distance
Name
Description
OM3 - MMF OM4 - MMF
100m 150m
M40-V85-QP-SR-D
Tx: 850 nm, VCSEL Temperature 0 °C to +70 °C operational temperature
ACT_10-14_EN 18/04/2016 is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners. OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability. OPTOKON a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM,
[email protected]
