Transcript
The BOSS is back! Stronger, quicker, brighter.
NEW!
The optimal duo:teSPEED POWER. On etuerciduisi tet lut AND il utat. Velenibh nonsecte in hent et aciliquisl. Quick anderos powerful toolfacipsum for drilling and fastening.
SPEED Drilling
The all-purpose QuaDrive. Quick, powerful and versatile.
Speed 3,800 rpm in 4th gear! Reach ideal drilling speeds with your QuaDrive. Work quick, clean and precise using this tool: you will reach the necessary high speed without any hassle even for bore holes and screw connections in metal.
Power 60 Nm in 1st gear! Powered by an 18 V battery, the QuaDrive drives even the thickest of screws into wood. Without pilot drilling! It manages sizes of 10 x 300 mm with ease.
Speed + Power + FastFix = Maximum application diversity – you will be thrilled when drilling and fastening. Thanks to the FastFix interface the machine can be adjusted to four different functions with one simple click: drilling, fastening, angle drilling and angle fastening. A tool for all applications!
Comparison of fastening speed. Power meets speed.
Fastening time (seconds)
12,0
10,0
10,0
8,0
8,0 6,0 4,0
11,0
5,3
2,0 0,0 Protool PDC Li-ion 18 V/3.0 Ah
Competitor A Li-ion 18 V/3.0 Ah
Fastening in spruce: 8 x 240 mm screw Source: PROTOOL testing laboratory 2011.
Competitor B Li-ion 21.6 V/3.0 Ah
Competitor C Li-ion 18 V/3.0 Ah
Maximum speed! The combination of rotation speed and constant power allows you to work much quicker with the QuaDrive than with competitors‘ tools. Save up to 50 % of valuable labour time!
The BOSS! All benefits, plus mobility guarantee.
7
Precise and non-tiring work. The electronic torque limiter. 12 settings for tuning the torque perfectly to your work requirements. Once the default value is exceeded, the tool is switched off electronically.
No interruptions. Battery level indicator. The amount of energy remaining can be seen at any time on the integrated LED display.
Virtually indestructible! The metal gear unit. Plastic is not robust enough for the QuaDrive. Only metal can resist the enormous forces and rotational speeds of the PROTOOL EC-TEC motor in the long term.
Lights up the dark. The lamp. Work safely and effectively thanks to optimal lighting in even the darkest of corners through individually adjustable LEDs.
It runs and runs and runs and ... The EC-TEC motor. You will never have to change the brushes again. The special motor offers you an extensive service life and a high degree of efficiency at the same time.
Power pack Lithium ion battery. Innovative battery technology combines minimum weight with maximum energy density – without memory effect.
+ : Perfect on their own – unbeatable together! The energy-saving EC-TEC motor allows the energy from the lithium-ion batteries to arrive where you need it: at the workpiece. This has noticeable effects on various aspects – continuous power when fastening large screws, speed while drilling and output quantity per battery pack.
Number (qty.) per battery charge
Comparison of output quantity. The battery that lasts for a long time.
58
45
2
Competitor A Li-ion 18 V/3.0 Ah
1
Protool PDC Li-ion 18 V/3.0 Ah
43
3
Competitor B Li-ion 21.6 V/3.0 Ah
Output quantity per battery charge: 8 x 240 mm screw in spruce Source: PROTOOL testing laboratory 2011.
4
38
Competitor C Li-ion 18 V/3.0 Ah
Flexibility across the entire construction site! Adjustable functions with a single click. The QuaDrive is several tools in one – without those annoying cables.
Diverse drilling and fastening options – 4 gears, 5 attachments. 7
IWC cordless impact wrench: Two gears for drilling up to 2,000 rpm and optional tangential stop for really tough situations: fastening metric screws in steel structures, anchor bolts into concrete or pilot drilling of mounting fixtures such as blind rivets. The enormous impact pulse of the tangential stop generates a torque that could never be achieved through rotatory force alone.
Double the variety. Firstly, you can use the 4 gears for drilling and fastening. Secondly, the QuaDrive can be changed into different tools with one simple click.
Technical specifications
DRC 12-4 TEC LI*
DRC 18-4 TEC LI
PDC 12-4 TEC LI*
PDC 18-4 TEC LI
IWC 18-2 TEC LI
Battery voltage/capacity
10,8 V Li-ion 3.0 Ah
18 V Li-ion 3.0 Ah
10.8 V Li-ion 3.0 Ah
18 V Li-ion 3.0 Ah
18 V Li-ion 3.0 Ah
No-load speed, 1st gear
0 - 400 rpm
0 - 400 rpm
0 - 400 rpm
0 - 400 rpm
0 - 400 rpm
No-load speed, 2nd gear
0 - 850 rpm
0 - 850 rpm
0 - 850 rpm
0 - 850 rpm
0 - 2,000 rpm
No-load speed, 3rd gear
0 - 1,850 rpm
0 - 1,850 rpm
0 - 1,850 rpm
0 - 1,850 rpm
–
No-load speed, 4th gear
0 - 3,800 rpm
0 - 3,800 rpm
0 - 3,800 rpm
0 - 3,800 rpm
–
Impact count, 4th gear
–
–
0 - 76,000 rpm
0 - 76,000 rpm
–
Torque hard/soft
45/25 Nm
60/40 Nm
45/25 Nm
60/40 Nm
60/40 Nm
Torque in “impact” mode
–
–
–
–
300 Nm
Drilling dia. in wood/metal
40/12 mm
50/12 mm
40/12 mm
50/12 mm
50/12 mm
Drilling dia. in masonry (tiles)
–
–
10 mm
10 mm
–
Chuck jaw width
1.5 - 13 mm
1.5 - 13 mm
1.5 - 13 mm
1.5 - 13 mm
–
Weight incl. CENTROTEC
1.6 kg
1.8 kg
1.6 kg
1.9 kg
2.3 kg * not available in Australia
Quick and powerful. Do what was previously only possible with a mains connection: 3,800 rpm in 4th gear. Drilling to perfection. 60 Nm in 1st gear with a single click. Fastening at unbelievable force.
POWER Fastening
TTS Tooltechnic Systems AG & Co. KG Wertstraße 20, D-73240 Wendlingen Represented by: Tooltechnic Systems (AUST) Pty Ltd Tooltechnic Systems (NZ) Ltd
Description
Cordless drill DRC 18-4 TEC LI 2 battery packs 3.0 Ah, CENTROTEC chuck and bit holder, bit, charger, keyless chuck, additional handle, supplied in compartment lid systainer.
764 946
DRC 18-4 TEC LI SET 2 battery packs 3.0 Ah, CENTROTEC chuck and bit holder, bit, charger, keyless chuck, additional handle, angle attachment, supplied in compartment lid systainer.
290 946
Rotation
1
2.
Cordless impact drill PDC 18-4 TEC LI 2 battery packs 3.0 Ah, CENTROTEC chuck and bit holder, bit, charger, keyless chuck, additional handle, supplied in compartment lid systainer.
764 941
PDC 18-4 TEC LI SET 2 battery packs 3.0 Ah, CENTROTEC chuck and bit holder, bit, charger, keyless chuck, additional handle, angle attachment, supplied in compartment lid systainer.
290 941
Rotation
2 Impact
Rotation
3
Impact
3.
IWC cordless impact wrench IWC 18-2 TEC LI 2 battery packs 3.0 Ah, CENTROTEC chuck and bit holder, bit, charger, supplied in compartment lid systainer.
Optimal organisation! Systainer with accessories sorting function for tool, attachments, insertion tools and other system accessories: neatly packed and safe to transport.
Tooltechnic Systems (AUST) Pty Ltd 63-65 Quantum Close, Dandenong South, VIC 3175 Postal Address: PO Box 4401 Dandenong South, VIC 3164 Australia Service Hotline: 1800 063 900 Phone: (03) 9799 9733 Fax: (03) 9799 9766 E-mail:
[email protected] Web: www.protool.com.au
Additional security with a 3-year warranty. PROTOOL does not just offer a 1-year or 2-year guarantee as required by law – PROTOOL offers a 3-year warranty on all power and carpentry tools. Simply fill in the warranty registration form and send it to our central registration office within 30 days. Or register the warranty online at www.protool.com.au.
Tooltechnic Systems (NZ) Ltd 27 Greenmount Drive, East Tamaki Postal Address: PO Box 258-078 Botany, Manukau 2163, Auckland New Zealand Service Hotline: 0800 337 8665 Phone: (09) 272 2220 Fax: (09) 272 2230 E-mail:
[email protected] Web: www.protool.co.nz
764 949
AU 07/12 Part No. 767 257 Prices are manufacturer-suggested retail prices valid until 31-12-2012. Protool may not be held liable for errors, if any. Technical specifications are subject to change. Products may differ from those illustrated. Prepared for TTS Tooltechnic Systems AG & Co. KG, Wendlingen, Germany.
1.
Part No.
