Transcript
catalogue 2006
2
FIND OUT QUBE... Satisfying the demands of people who make a living making music, responding to the specific, often unique demands of live performers with competitive prices: this is not just a dream. It is the philosophy behind QUBE, a range of speaker systems, power amplifiers and processor modules. The result is a comprehensive, expandable and fully reliable PA system with incredible sound quality and a versatility that makes it ideal for permanent installation as well as road use. The Qube project — dedicated to professionals who won’t settle for second best. Sound Quality QUBE series speakers are the optimum solution for live performances, whether in small and intimate venues, or in big open air arenas where thousands of watts are needed. The series offers high quality and high fidelity sound reproduction thanks to components specifically designed for the QUBE system. So you can perform well and be heard well, relying on top quality sound reproduction even at high power, show after show, night after night. Comprehensive Product Range Those who use products from the QUBE range are not simply the owners of a pair of speakers or a power amplifier. Those who choose QUBE embrace the philosophy of a system designed to adapt to a wide range of requirements, from the perfect pair of speakers for the piano-bar performer or the consultant with the task of installing a PA system in a public building, to mega systems created for concert musicians performing at high volume for thousands of fans. The goal of offering a comprehensive product range is reached thanks to the complete series of passive and powered speakers with a built-in digital controller; an external digital controller is designed to enhance the performance of the passive speakers, to allow the expansion of systems with subwoofers, and to enable configuration in accordance with individual requirements. UpGrade Options The modularity and flexibility of the QUBE range enables users to continually expand their systems at a minimum cost, “navigating” through the configuration options as they please… options which are all obtainable simply by integrating their existing systems. Start with a pair of speakers, and later as needs change, it is a simple matter to increase the power of the system by adding a final stage and another pair of speakers; alternatively, the addition of a pair of subwoofers with a final stage provides a truly comprehensive system in terms of frequency response. Reliability Those who claim to offer a professional PA system must guarantee the reliability of their components. The Qube engineers have made no compromises on this front. The inclusion of protective circuitry on the crossover filter limits excess power supplied to the driver, preventing any damaging “Larsen” effects. For those who want an additional level of protection, the controller limits power when the woofer runs the risk of overheating or when movement of the cone is so great as to alter or even damage its mechanical characteristics. The same attention to detail has been given to amplifiers, with protection circuits to preventing direct current, overheating and accidental short-circuiting at the output. Optimisation For those not content even with the matchless specifications of QUBE speakers, the digital controller further enhance performance, optimising sound, reliability and flexibility. Indeed the processor has been designed to allow active optimisation of the already impressive frequency response through “ad hoc” equalisation of each indi-
vidual speaker, to optimise reliability by protecting woofers in the same way as drivers, and to process audio signals by separating the part of the signal directed to the full-range speakers from that directed to the subwoofers. By an internal switch all the fullrange passive speakers can be split into active ways. High Dynamic Device.
Used on the powered Qube amplifier, the HDD is an integrated system, comprising a digital processor and two high efficiency amplifier. The system, very compact and light, trough a sophisticated equalization and a energy control produce a clean sound with high dynamic in a safe way. The key features are: Time domain equalization to produce the best frequency and phase response; Built-in crossover is designed for the minimum driver interference and the best polar response; Excursion control to avoid the woofer exceed allowed displacement; Energy control to keep the driver operating in a safe working area; High efficiency, high peak power PWM amplifier for the LW woofer; High efficiency class G amplifier for the HW compression driver; Remote control possibility trough a computer, via a dedicated program software and a computer, allowing the preset can be locked into memory to meet the challenging acoustics of any venue. Curve preset and fine adjustment through equalization 4 par. Eq. and delay control (manual mode with DIP switch). Monitoring of the system status (speakers check, volume control, input sensitivity selection, output level monitoring overload or equalizer overload, on/off command), monitoring of the input; 8 default presets These presets have been made to give to the speakers the best performances at different applications. All the speakers are eprovided with the following default presets :Floor, Low Extension, HF Compensation, Array. The Q 110A, because of its monitor design, have also a Stage Monitor preset to be insert when it is used as floor monitor. These presets make a frequency response correction: 1. to compensate the bass frequency energy boost 2. to extend the frequency response in the low range to compensate the lack of a subwoofer at moderate SPL level 3. to compensate the high frequency attenuation due to the air in a “ far-field” situation. 4. to assemble two speakers in array configuration increasing the SPL and the coverage. On/Off sub connection
· · · · · · ·
·
·
The powered speakers is the latest addition to complete the Qube line; by the use of HHD module ( Class D "PWM" amplifier; incorporated digital DSP; Control Remote System Supervision), the speakers are tailored for a wide range of touring and installed sound reinforcement applications.
The full range speakers can be switched into two way bi amp by moving a selector located on the back plate.
3
SPEAKERS
Q 106 Small enough almost to go unnoticed, the Q106 nonetheless has the audio presence of a true giant. 2 x Q 106 combined with a power amplifier PA 140, 1 x digital controller SP 22D and 1 x subwoofer QS 112 is a compact PA system featuring as main characteristics a very pure sound quality, deep powerful bass and, above all, it is a very “easy to handle” system. With its limited size and weight, and a sound impact (120 dB SPL) comparable to that of “bigger” systems in the series, the Q106 offers the ideal amplified sound solution when the requirement is for presence and compact dimensions. The Q106, with a frequency response of 65 Hz - 18 kHz, uses an 6,5” woofer (1,5” coil) with a 1” driver (1,4” coil) and a rotatable horn with 70°H x 50°V coverage. The Q 106 multi shape cabinet with 30° and 45° angles is ideal as small monitor for professional musicians. Easy arrayable, thanks to the dedicated hardware, the speaker is perfect in fixed installations for pubs, conference halls, waiting rooms… blending effortlessly with the surroundings thanks to their carefully crafted professional look. The speakers are made using 12 mm. Baltic birch wood, finish in a durable and scrach resistant paint.
Q 106A Same features of Q 106 with a built-in class G amplifier of 150 W for the low section and 50 W for the high section.
Q 106 TECHNICAL SPECIFICATIONS
Q 106A
Configuration (fullrange)
Ways
2
Recommended amplifier
Watt (rms)
200
Built in amplifier (LF/HF)
Long term power
Watt
100
Short term power (IEC 268-5)
Watt
400
Nominal impedance
ohm
Configuration (bi-amp)
Ways
Recommended amplifier
Configuration
Ways
2
Watt (rms)
150/50
Frequency response
@ -6dB
65Hz – 20 KHz
Low frequency woofer
inch
6.5 - 1.5 coil
8
High Frequency driver
inch
1 - 1.4 coil
2
Sensitivity
dB
94
(@1W/1m)
Watt (rms):
200/50 (LF/HF)
Maximum SPL
dB
120
Long term power
Watt:
100/25 (LF/HF)
Dispersion (rotatable)
HxV
70° x 50°
Short term power (IEC 268-5)
Watt:
400/100 (LF/HF)
Input impedance
Kohm
22
Nominal impedance
ohm:
8/8 (LF/HF)
KHz
2,5
Frequency response
@ -6dB
65Hz - 18KHz
Input connectors
inch
6.5 - 1.5 coil
AC connector
PowerCon twistlock
High frequency driver
inch
1 - 1.4 coil
Net dimensions (WxHxD)
cm
20x35x23,7
Sensitivity / fullrange
(@1W/1m)dB
94
Net weight
Kg
9
Sensitivity / bi-amp
(@1W/1m)dB
94/105 (LF/HF)
dB
120
Low frequency woofer
Maximum SPL (fullrange) Maximum SPL (bi-amp)
dB
120/125 (LF/HF)
Dispersion (rotatable)
HxV
70° x 50°
Crossover frequency
KHz
2,5
Recommended HP filter
55 Hz-24 db oct
Recommended external controller
SP 22 D
Input connectors
4
TECHNICAL SPECIFICATIONS
2 speakon
Net dimensions (WxHxD)
cm
20x35x23,7
Net weight
Kg
7,5
Crossover frequency
XLR with loop
SPEAKERS
Q 208 The Qube Q 208 was designed to be the perfect travelling companion for professional musicians: compact, lightweight and easy to handle. Yet despite its small size, it lacks nothing in power. The exclusive slimline shape gives astonishing results from such a small enclosure, putting it in the same performance league as systems with dimensions and costs 2 or even 3 times as much. The WTW configuration comprising a high frequency 1” driver and horn positioned between two 8” woofers gives a sound comparable to that from a single source, benefiting from the presence and definition typical of coaxial systems. The result is an extremely flat frequency response, without colouring between 65Hz and 18 kHz. Covering a horizontal angle of 80°, the QUBE Q 208 is the ideal choice both for permanent installations, for example in pubs and conference halls, and as portable equipment for professional musicians. On stage, QUBE Q208 cabinet can also be used as monitors.
Q 208 TECHNICAL SPECIFICATIONS Configuration (fullrange)
Ways
2
High frequency driver
inch
1 - 1.7 coil
Recommended amplifier
Watt (rms)
600
Sensitivity / fullrange
(@1W/1m)dB
100
(@1W/1m)dB 100/106 (LF/HF)
Long term power
Watt
300
Sensitivity / bi-amp
Short term power (IEC 268-5)
Watt
1200
Maximum SPL (fullrange)
dB
130,5
dB
130,5/128,5 (LF/HF)
Nominal impedance
ohm
8
Maximum SPL (bi-amp)
Configuration (bi-amp)
Ways
2
Dispersion (rotatable)
HxV
80° x 50°
Watt (rms):
600/100 (LF/HF)
Crossover frequency
KHz
1,8
Watt:
300/50 (LF/HF)
Recommended HP filter
Recommended amplifier Long term power Short term power (IEC 268-5)
Watt:
1200/200 (LF/HF)
Nominal impedance
ohm:
8/8 (LF/HF)
Frequency response Low frequency woofer
@ -6dB
65Hz - 18KHz
inch
2x8 - 2 coil
55 Hz-24 dB oct
Recommended external controller Input connectors
SP 22 D XLR
2
Net dimensions (WxHxD)
cm
29,2x67x25,3
Net weight
Kg
13,6
5
SPEAKERS
Q 110 Compact but powerful bass reflex speaker employing a 10” neodymium loudspeaker. and 1” driver coupled to a 80°H x 50°V rotatable horn. The sound quality and the ratio of the performance to size were the main project criteria for the Q 110. The speaker is ideal for distributed sound reinforcement in night clubs, pubs, theatres. Thanks to its multi angle the cabinet can be used as monitor stage. Together with the Q 106,the Q110 this cabinet has been designed for visual discrete installation on all these applications. The enclosure tuning has been optimized to provide a maximum mid/high efficiency with sufficient low frequency extension. For more impact and for application that require more low frequency the use of complementary QUBE sub is suggested. The cabinet is constructed from 18 mm. Baltic birch wood has a durable and scratch resistant paint finish and it is provided with 6 M6 UHM attachments.
Q 110A Same features of Q 110 but with a built-in HHD device having a PWM amplifier of 400 W for the low section and 100 W for the high section.
Q 110 TECHNICAL SPECIFICATIONS
Q 110A
Configuration (fullrange)
Ways
2
Recommended amplifier
Watt (rms)
400
Built in amplifier (LF/HF)
Configuration
Ways
2
Watt (rms)
400/100
Long term power
Watt
200
Frequency response
@ -6dB
60Hz – 20 KHz
Short term power (IEC 268-5)
Watt
800
Low frequency woofer
inch
10 – 2,5 coil
Nominal impedance
ohm
8
High Frequency driver
inch
1 - 1.7 coil
Configuration (bi-amp)
Ways
2
Sensitivity
dB
97
Recommended amplifier
(@1W/1m)
Watt (rms)
400/100 (LF/HF)
Maximum SPL
dB
126
Long term power
Watt
200/50 (LF/HF)
Dispersion (rotatable)
HxV
80° x 50°
Short term power (IEC 268-5)
Watt
800/200 (LF/HF)
Input impedance
Kohm
22
Nominal impedance
ohm
8/8 (LF/HF)
KHz
1,6
Frequency response
@ -6dB
60Hz - 18KHz
Input connectors
inch
10 – 2,5 coil
AC connector
High frequency driver
inch
1 - 1.7 coil
Sensitivity /fullrange
(@1W/1m)dB
96,5
Sensitivity/ bi-amp
(@1W/1m)dB 96,5/106 (LF/HF)
Low frequency woofer
Maximum SPL (fullrange) Maximum SPL (bi-amp)
dB
122,5
dB
122,5/128,5 (LF/HF)
Dispersion (rotatable)
HxV
80° x 50°
Crossover frequency
KHz
1,8
Recommended HP filter
45Hz-24dboct
Recommended external controller
SP 22 D
Input connectors
6
TECHNICAL SPECIFICATIONS
2 speakon
Net dimensions (WxHxD)
cm
33,8x59x31,3
Net weight
Kg
17
Crossover frequency
XLR with loop PowerCon twistlock
HDD digital control
included
Computer remote control input
RJ 45 plug
Net dimensions (WxHxD)
cm
33,8x59x31,3
Net weight
Kg
24
SPEAKERS
Q 112 The QUBE Q112 is a full-range speaker system designed with compactness and a superior quality/price ratio in mind. Although designed to operate mainly at high sound levels, the clarity of sound and bass power make the Q112 ideal for every type of situation, from disco to concert venue. With its limited dispersion and low distortion, the Q112 is ideal for sound systems in a variety of settings, for example churches, conference centres etc. The Q112 uses a heavy duty neodymium 12” woofer with a moving coil of 3” diameter. The woofer is housed in a bass reflex cabinet operating at frequencies from 60Hz to 18 KHz. A 1” ( 1,7” coil) driver is fitted to the 80°x50° rotatable horn, guaranteeing uniform coverage and low distortion even at high power. Equipped with a tripod socket 3 M10 UHM attachments, the Q112 is built with 18 mm. Baltic birch wood has a tripod socket. The cabinet is finished with durable scratch resistant paint.
Q 112A Same features of Q 112 but with a built-in HDD device having a PWM amplifier of 500 W for the low section and 150 W for the high section.
Q 112 TECHNICAL SPECIFICATIONS
Q 112A
TECHNICAL SPECIFICATIONS
Configuration (fullrange)
Ways
2
Recommended amplifier
Watt (rms)
600
Configuration Built in amplifier LF/HF
2 500/150
Long term power
Watt
300
Frequency response
Short term power (IEC 268-5)
Watt
1200
Low frequency woofer
inch
12 – 3coil
Nominal impedance
ohm
8
High Frequency driver
inch
1 - 1.7 coil
Configuration (bi-amp)
Ways
2
Sensitivity
dB
98
Recommended amplifier
@ -6dB
Ways Watt (rms)
(@1W/1m)
48Hz – 20 KHz
Watt (rms)
600/100 (LF/HF)
Maximum SPL
dB
128
Long term power
Watt
300/50 (LF/HF)
Dispersion (rotatable)
HxV
80° x 50°
Short term power (IEC 268-5)
Watt
1200/200 (LF/HF)
Input impedance
Kohm
22
Nominal impedance
ohm
8/8 (LF/HF)
KHz
1,6
Frequency response
@ -6dB
48Hz - 18KHz
inch
12 – 3 coil
AC connector
High frequency driver
inch
1 - 1.7 coil
HDD digital control
Sensitivity /full-range
(@1W/1m)dB
98
Sensitivity/ bi-amp
(@1W/1m)dB
98/106 (LF/HF)
dB
128,5
Low frequency woofer
Maximum SPL (fullrange) Maximum SPL (bi-amp)
dB
125,5/128,5 (LF/HF)
Dispersion (rotatable)
HxV
80° x 50°
Crossover frequency
KHz
1,8
Recommended HP filter
Crossover frequency Input connectors
XLR with loop PowerCon twistlock included
Net dimensions (WxHxD)
cm
42x67,5x39,3
Net weight
kg
34
40Hz-24dboct
Recommended external controller
SP 22 D
Input connectors
2 speakon
Net dimensions (WxHxD)
cm
42x67,5x39,3
Net weight
kg
27
Hdd digital controller
7
SPEAKERS
Q 115 The Q115 is a 2-way speaker system with a 15” woofer, capable of delivering 131,5 dB SPL, housed in a compact cabinet. Designed mainly for high sound levels, the Q115 is ideal for every type of situation, from disco to concert venue, thanks to the clarity of sound and bass power which are its outstanding characteristics. With its controlled dispersion and low distortion, the Q115 is ideal sound systems in a variety of settings, for example churches, conference centres etc. The Q115 uses a neodymium 15” woofer with a 3” moving coil and which will easily handle up to 700 W. The woofer is housed in a bass reflex cabinet operating at frequencies from 45 Hz up to 18 KHz. The 60°Hx40°V rotatable horn with its powerful 2” titanium driver guarantees accurated dispersion and low distortion at high power up to 18 kHz. Built from 18 mm. Baltic birch wood the Q 115 is finished with a durable and hard scratching paint.The speaker is equipped with tripod socket and 4 M10 UHM attachment points.
Q 115A Same features of Q 115 but with a built-in HDD device having a PWM amplifier of 800 W for the low section and 300 W for the high section.
Q 115 TECHNICAL SPECIFICATIONS
Q 115A
TECHNICAL SPECIFICATIONS
Configuration (fullrange)
Ways
2
Recommended amplifier
Watt (rms)
800
Configuration Built in amplifier LF/HF
2 800/300
Long term power
Watt
400
Frequency response
@ -6dB
45Hz – 20 KHz
Short term power (IEC 268-5)
Watt
1600
Low frequency woofer
inch
15 – 3coil
Nominal impedance
ohm
8
High Frequency driver
inch
2 - 3 coil
Configuration (bi-amp)
Ways
2
Sensitivity
dB
99,5
Recommended amplifier
(@1W/1m)
Watt (rms)
700/160 (LF/HF)
Maximum SPL
dB
131,5
Long term power
Watt
350/80 (LF/HF)
Dispersion (rotatable)
HxV
70° x 40°
Short term power (IEC 268-5)
Watt
1400/320 (LF/HF)
Input impedance
Kohm
22
Nominal impedance
ohm
8/8 (LF/HF)
KHz
1,3
Frequency response
@ -6dB
45Hz - 18KHz
inch
15 – 3 coil
High frequency driver
inch
2 - 3 coil
Sensitivity /fullrange
(@1W/1m)dB
99,5
Sensitivity/ bi-amp
(@1W/1m)dB 99,5/108 (LF/HF)
Low frequency woofer
Maximum SPL (fullrange) Maximum SPL (bi-amp)
dB
131,5 (LF/HF)
dB
131,5/133
Dispersion (rotatable)
HxV
60° x 40°
Crossover frequency
KHz
1,5
Recommended HP filter
Crossover frequency Input connectors AC connector
cm
48x75x47,3
Net weight
Kg
49
2 speakon
Net dimensions (WxHxD)
cm
48x75x47,3
Net weight
Kg
38
included
Net dimensions (WxHxD)
SP 22 D
Input connectors
XLR with loop PowerCon twistlock
HDD digital control
35Hz-24dboct
Recommended external controller
Passive speaker back plate
8
Ways Watt (rms)
SPEAKERS
QM 115
monitor system
The QM 115 is a full range loudspeaker with a built in passive filter that, as in all Qube passive speakers, can be switched into two ways bi amp cabinet. The coaxial titanium 2” driver and the 15” LF speaker use separated magnets. The coax driving system is quite close to one point source; this configuration creates a very compact drive assemble that allows to use a compact low profile cabinet. The result is a monitor with a vocal presence and clarity, balanced sound and feedback stability. The QM 115M is capable of high sound pressure. The monitor is made from 18 mm. Baltic birch wood has and scratch resistant paint finishing. The shape of the cabinet allows to assemble the speaker in different arrays as drum fill coupled with QS 118 or QS 115 subwoofers or side fill coupling two cabinets. The front of the monitor is protected by a metal grill. The QM 115 is equipped with 5 M10 UHM attachment points.
QM 115 TECHNICAL SPECIFICATIONS Configuration (Full range)
Way
2 coax
Low frequency woofer
inch
15 – 3 coil
Recommended amplifier
Watt (rms)
700
Sensitivity (Full range)
(@1W/1m) dB
99
(@1W/1m) dB 99/108 (LF/HF)
Long term power
W
350
Sensitivity (Bi amp)
Short term power(IEC268-5)
W
1400
Maximum SPL (Full range)
dB
130
dB
103/133 (LF/HF)
KHz
Nominal impedance
ohm
8
Maximum SPL (Bi amp)
Configuration (Bi amp)
Way
2
Crossover frequency
Recommended amplifier Long term power Short term power(IEC268-5) Nominal impedance Frequency response High frequency driver
Watt (rms)
700/160 (LF/HF)
Dispersion
W
350/80 (LF/HF)
Recommended HP filter
W
1400/320 (LF/HF)
ohm
8/8 (LF/HF)
@ -6dB
60Hz – 18KHz
inch
2 – 3 coil
1,6 70° conical 45Hz-24dboct
Recommended external controller
SP 22 D
Input connectors
2 speakon
Net dimensions (WxHxD)
cm
53,7x38,7x59,8
Net weight
Kg
27
9
SUBWOOFERS
QS 112 The QS 112 is a very compact and powerful subwoofer system. An heavy 12” front load loudspeaker handles a 800W of continuous power with an SPL of 129,5 dB. The high output capability, two separate coils (switchable in one and builtin stereo crossover with satelite outputs), means that the QS 112 is the companion for two Q 106, creating a compact PA system featuring a very pure sound quality, deep powerful bass sound and , above all, a very “easy to handle” system, ideal for permanent or mobile use in small and medium sized venues, or where the space is limited. Built from 18 mm. Baltic birch wood the QS 112 is finished with a durable and hard scratching paint. The subwoofer is equipped with a top mount socket and 3 M 10 UHM attachment points.
QS 112A Same features of QS 112 but with a built-in amplifier of 500 W.
QS 112
QS 112A
TECHNICAL SPECIFICATIONS
Configuration
Bass reflex
Recommended amplifier
Watt (rms)
Configuration
Bass reflex
800
Built in amplifier LF
Watt (rms)
500
@ -6dB
40Hz – 130 Hz
inch
12 – 3coil
Long term power
Watt
400
Frequency response
Short term power (IEC 268-5)
Watt
1600
Low frequency woofer Sensitivity
Nominal impedance
ohm
8+8
Frequency response
@ -6dB
40Hz – 300Hz
inch
12 – 3 coil
dB
97,5
dB
129,5
Crossover frequency
Low frequency woofer Sensitivity
(@1W/1m)
Maximum SPL Dispersion Crossover frequency
Omnidirectional KHz
Recommended HP filter
0,13 passive
35Hz-24dboct
Recommended external controller
SP 22 D
Input connectors
10
TECHNICAL SPECIFICATIONS
2 speakon
Net dimensions (WxHxD)
cm
39x52x55
Net weight
Kg
30
(@1W/1m)
dB
97,5
dB
127,5
Dispersion (rotatable)
HxV
omnidirectional
Input impedance
Kohm
22
KHz
0,13
Maximum SPL
Input connectors
XLR with loop
Power cord
5
Net dimensions (WxHxD)
cm
39x52x55
Net weight
kg
33,5
SUBWOOFERS
QS 115 The QS 115 subwoofer is the ideal companion for QUBE speaker systems when extra power is required at low frequencies. The QS 115 SUB has one 15” front-facing speaker bass reflex loaded that can easily handle 1200 W continuous power with SPL of 132 dB. The compact size of the QS 115 provide a high degree of versatility for the installation where the space is measured. Applications include night clubs, pubs, small live venues, theatres and distributed subwoofers for disco. When used with Q110 and Q112 is ideal for stage monitoring applications like side fill, drum or keyboard fill. Built from 18 mm. Baltic birch wood the QS 115 is finished with a durable and hard scratching paint .The speaker is equipped with a top pole mount socket and 3 M10 UHM attachment points.
QS 115A Same features of QS115 but with a built-in HDD device having a PWM amplifier of 1000 W .
QS 115
QS 115A
TECHNICAL SPECIFICATIONS
Configuration
Bass reflex
Recommended amplifier
TECHNICAL SPECIFICATIONS
Configuration
Bass reflex
Watt (rms)
1200
Built in amplifier LF
Watt (rms)
1000
Long term power
W
600
Frequency response
@ -6dB
38 Hz – 100 Hz
Short term power (IEC 268-5)
W
2400
Low frequency woofer
inch
15 – 4coil
Nominal impedance
ohm
4
dB
98,5
Frequency response
@ -6dB
38Hz – 400Hz
inch
15 – 4 coil
dB
98,5
Input impedance
Maximum SPL
dB
132
Crossover frequency
Crossover frequency
KHz
External 0,1
Low frequency woofer Sensitivity
(@1W/1m)
Sensitivity
(@1W/1m)
Maximum SPL
dB
131,5
Dispersion (rotatable)
HxV
omnidirectional
Omnidirectional
AC connector
Recommended HP filter
30Hz-24dboct
HDD digital control
SP 22 D
Input connectors
2 speakon
Net dimensions (WxHxD)
cm
48x89x60
Net weight
Kg
47
22
KHz
0,1
Input connectors
Dispersion
Recommended external controller
Kohm
XLR with loop PowerCon twistlock included
Net dimensions (WxHxD)
cm
48x89x60
Net weight
Kg
58
11
SUBWOOFERS
QS 118 The QS 118 subwoofer with a 18” woofer is the ideal companion for the Q 112 and Q115 speakers when strong response at low frequencies is required. The QS 118 sub has a 18” front-facing speaker bass reflex loaded that easily handle 1400 W continuous power with SPL of 134,5 dB. The QS 118 is specially designed to be positioned on the floor as a stand for all speakers of the QUBE range. The QS 118 is the answer to the demand of very compact low end impact enclosure. Designed for high performance touring, the reduced front size allow for the creation of subwoofer arrays occupying a minimum space. As standard the QS 118 includes a built in pole mount socket that facilitates the creation of Front of House system when used with Q 112 or Q 115 cabinets. Easy to carry thanks to the rear wheels, the cabinet is made from a 18 mm. Baltic birch wood and finished with scratch resistant paint.
QS 118A Same features of QS118 but with a built-in HDD device having a PWM amplifier of 1000 W for the low section.
QS 118 TECHNICAL SPECIFICATIONS
QS 118A
Configuration
Bass reflex
Recommended amplifier Long term power Short term power(IEC268-5)
1400
Built in amplifier LF
Watt (rms)
1000
W
700
Frequency response
@ -6dB
33 Hz-100 Hz
Low frequency woofer
inch
18 – 4 coil
dB
100
W
2800
ohm
4
Frequency response
@ -6dB
33Hz – 400Hz
inch
18 – 4 coil
Sensitivity
(@1W/1m)
dB
100
Maximum SPL
dB
134,5
Crossover frequency
KHz
External 0,1
Dispersion Recommended HP filter
omnidirectional
(@1W/1m)
Maximum SPL
dB
133
Dispersion (rotatable)
HxV
omnidirectional
Input impedance Crossover frequency
Kohm
22
KHz
0,1
Input connectors
XLR with loop PowerCon twistlock
HDD digital control
SP 22 D
Input connectors
Sensitivity
AC connector
28Hz-24dboct
Recommended external controller
12
Bass reflex
Watt (rms)
Nominal impedance
Low frequency woofer
TECHNICAL SPECIFICATIONS
Configuration
2 speakon
Net dimensions (WxHxD)
cm
53,7x75x67
Net weight
Kg
58
included
Net dimensions (WxHxD)
cm
53,7x75x67
Net weight
Kg
69
SUBWOOFERS
QS 218 The QS 218 subwoofer with two 18” woofer is the ideal companion for the QSA 210 and line array speakers. The QS 218 has a 2 x 18” front-facing speaker bass reflex loaded that will easily handle 2800 W continuous power with SPL of 140,5 dB. The QS 218 is ideal for application requiring maximum low frequency impact and extension. Designed for high performance touring the QS 218 provides low end punch combined with high power handling and efficiency. Ruggedly constructed of 18 mm. Baltic birch wood the enclosure is internally braced to avoid vibration at extreme sound pressure level. Easy to carry thanks to 4 rear wheels (optional), the cabinet is finished with scratch resistant paint.
QS 218 TECHNICAL SPECIFICATIONS Configuration
Bass reflex
Recommended amplifier Long term power Short term power(IEC268-5)
Watt (rms)
2800
W
1400
W
5600
Nominal impedance
ohm
2
Frequency response
@ -6dB
28Hz – 400Hz
inch
18 – 4 coil
Low frequency woofer Sensitivity
dB
103
Maximum SPL
(@1W/1m)
dB
140,5
Crossover frequency
KHz
External 0,1
Dispersion
omnidirectional
Recommended HP filter
24Hz-24dboct
Recommended external controller Input connectors
SP 22 D 2 speakon
Net dimensions (WxHxD)
cm
107x73x65,7
Net weight
Kg
100
13
ACCESSORIES
14
ADP 106
WMS1012
Adaptor for speaker stand dedicated to Q 106 and Q 106A
Wall mounting bracker for Q 110, Q 110A, Q 112 and Q 112A
WMS 106
CFB 1025
Wall mounting bracket for Q 106 and Q 106A
Pipe Clamp
CFB 106
FB 110
Bracket adaptor with clamp for Q 106 and Q 106A
Flying bracket or movible stand adaptor for Q 110 and Q 110A
U 106
FB 112
U bracket for Q 106 and Q 106A
Flying bracket or movible stand adaptor for Q 112 and Q 112A
RDS 106
FB 115
Rotatable stand adaptor for Q 106 and Q 106 A
Flying bracket or movible stand adaptor for Q 115 and Q 115A
ADP 125
FM115M
Adaptor for speaker stand dedicated to Q 110, Q 110A, Q 112, Q 112A, Q 115 and Q 115A
Flying bracket or movible stand adaptor for QM 115
675,5
590
350
LAYOUTS
200 421
338,5
313,5 99,5
287
Q 110
20°
Q 112
16°
750
685
490
Q 106
393
237
313,5
50
°
45°
160
390 480 473,5
480
540
603
321
20°
QS 112
QS 115
750
25°
657
387,5
Q 115
598,5
1070
537
669
730
537
QS 118
QS 218
QM 115
15
ARRAYS
Q 106
TOTAL COVERAGE WITH 50° HORN POSITION
Q 110
WITH 50° HORN POSITION WITH 80° HORN POSITION
TOTAL COVERAGE WITH 70° HORN POSITION TOTAL COVERAGE WITH 50° HORN POSITION
TOTAL COVERAGE WITH 28° HORN POSITION
Q 115
Q 112
WITH 50° HORN POSITION
WITH 40° HORN POSITION
WITH 80° HORN POSITION
WITH 60° HORN POSITION TOTAL COVERAGE WITH 50° HORN POSITION TOTAL COVERAGE WITH 40° HORN POSITION TOTAL COVERAGE WITH 80° HORN POSITION TOTAL COVERAGE WITH 60° HORN POSITION
QM 115
QM 115
QS 118
TOTAL COVERAGE
16
CONNECTIONS EXAMPLES
17
CONNECTIONS EXAMPLES
BI-AMP MODE
WEDGE MONITOR
ARRAY
18
DRUM FILL
TOURING SYSTEM
QSA-210 line array
19
TOURING STSTEM
QSA 210 LINE ARRAY The QSA-210 is a two way passive line array speaker. Two 10” neodymium loudspeakers, two 1” neodymium drivers handle a power of 500 watts. Easy to use, the new Qube Line Array is made, as well as all Qube products, in cooperation with Renkus-Heinz R&D team. The system is based on a totally new radical technology: the Isophasic Plane Wave Generator. By the use of a true acoustical lens in the hornsection loaded by two 1" high-compression neodymium drivers, the result is a line shaped source evenly distributed within the cabinet as well as within the line array. It allows high power and precise line array performance to be generated from a column of biamped (minimum 6 speakers)cabinets just 60 cm wide making it perfect for medium-sized tours and installations in venues such as theatres. The Qube series is fully compatible, electronically and acoustically, with the QSA-210, which can be used to partner it with sidefills, downfills and sub-bass cabinets. The cabinet is designed for extremely quick set-up and the included twopoint flying hardware admits two different settings (0° and 5°) for straight line array as well as curved clustering. The express-bar is designed to enable firm fly mount as well as ground-stacking. The SP 26 is a digital signal processing controller programmed to optimise the performances of the total system.
QSA 210 TECHNICAL SPECIFICATIONS (single cabinet)
QSA 210
Horizontal dispersion
150°
Frequency range (-3dB)
5°
Sensitivity (1 W/1 mt.)
Vertical dispersion LF Drivers
2x10"neodymium woofers
HF Drivers Power
TECHNICAL SPECIFICATIONS (for 8 speakers)
2x1" neodymium drivers
Max calculated SPL
LF >_ 144 dB HF >_ 139 dB (splay dependent)
HF = 100 W RMS into 8 Ohm
Max SPL
LF _> 110 dB HF >_ 110 dB (splay dependent)
LF = 400 W RMS into 8 Ohm
Sensitivity (1 W/1 mt.)
60 Hz -18 KHz
Horizontal coverage: 150°
LF = 101 dB
Vertical coverage
HF = 107 dB
Controller
LF = 127 dB
Suggested subwoofers
HF = 127 dB
Splay dependent SP 26 D QS 218 - QS 118 RUT - TRS
Net dimensions (WxHxD)
cm
60,5x29,5x40,5
Net weight
kg
32
Suggested power amplifiers
PA 360
ACCESSORIES CONNECTING HARDWARE
Ringing hardware mod. HSA-210, wheel dolly mod. WD-210,
Integrated unique 2 point interconnecting bars for line (0°)
interconnecting bar mod. IB-210.
and curved (5°) arrayability.
QSA 210A LINE ARRAY Powered version of the QSA 210 line array system equipped with HDD device with a PWM amplifier of 600W for the low section and 200W amplifier for the highs.
20
TOURING STSTEM
QSA 210 LINE ARRAY AIMING SOFTWARE The QSA 210 is supported by QUBE “Aiming Software” wich facilitates a quick design of a line array. The software calculates accurate frequency dependant coverage for a definied audience area.
ACCESSORIES IS-218 Steel dolly for vertically stacking QSA 210 and QSA 210A units
HSA-210 Ringing hardware
IB-210 Interconnecting bar
21
SPEAKERS + SUBWOOFERS
BRK The QUBE BRK is a trapezoidal shaped full range horn loudspeaker enclosure equipped with doublet 15” (LF), 10” (MF) in a coaxial construction with a 2” (HF) driver. The 2”-driver is fed into a Renkus-Heinz® CBH2000-6 horn, which gives a well balanced frequency response throughout the field of (HxV - 60 x 40) coverage. Due to the coaxial design between the 10” and 2”, the sound is produced from a one-point source within the vocal field of frequencies, which greatly adds to clarity and transparency of the sound and reduces problems with lobing and comb filtering effects. The extremely high sensibility (106 dB 1W/1m) enables high power handling and efficient amplifier utilization, and gives the loudspeaker capability of delivering sound pressure levels at 133 dB (RMS) and up to 137 dB (peak). The loudspeaker will in total handle 2760W (2x15” 2000W, 10” 600W, 2” 160W) of power. This touring specified enclosure is constructed in durable 13-layer birch plywood and heavily braced for extra stabilization. The cabinet comes as standard equipped with extra-reinforced flying hardware that runs from top to bottom as well as heavy-duty handles for easy rigging and stacking. The cabinet is painted in durable black paint. QUBE BKR is by sound and size carefully matched to the QUBE RUT doublet 18” subwoofer and due to the identical sizes of the cabinets, the handling and rigging for the loudspeaker system is extremely easy and well balanced.
RUT The QUBE RUT is just like the QUBE BRK a trapezoidal in shape and offers a horn-loaded subwoofer construction with doublet 18” that is capable of a solid sub frequency response from 32 to 150Hz. The horn construction is a 7th order band pass design and due to its excellent transient response able of delivering high definition sub frequencies with an extreme “tight” sound. The dual 18” woofers can handle 2800W (2 ohm) and will produce sound pressure levels up 132 dB continues and 137 dB peak. This touring specified enclosure is constructed in durable 13-layer birch plywood and heavily braced for extra stabilization and resonance cancellation. The cabinet is as standard equipped with heavy duty handles for easy rigging and stacking. The cabinet is painted in durable polyurethane black paint. The size and sound of the QUBE RUT is carefully matched with QUBE BRK in order to simplify handling and enhance over all capabilities for the system.
BRK
TECHNICAL SPECIFICATIONS Configuration Recommended amplifier Long term power Short term power (IEC 268-5) Nominal impedance Frequency response Low frequency woofer Mid frequency woofer High frequency driver Sensitivity (@1W/1m) Maximum SPL Dispersion Crossover frequency Recommended external controller Input connectors Net dimensions (WxHxD) Net weight 22
Ways Watt (rms) Watt Watt ohm @ -6dB inch inch inch dB dB H°xV° KHz
cm Kg
3 2000/600/160 (LF/MF/HF) 1000/300/80 (LF/MF/HF) 4000/1200/320 (LF/MF/HF) 4/8/8 (LF/MF/HF) 50 - 18KHz 2 X15 - 4 coil 10-3 coil 2 - 2,5 coil 104/104/106 (LF/MF/HF) 137/132/128 (LF/MF/HF) 60° x 40° 0,35/1,6 SP 12 BRK 2 x Speakon 124 X60.5X80 104
RUT 2800 1400 5600 2/4 32-150Hz 2 X18”- 4 coil
103 137 Omnidirectional 0,1 external SP 12RUT 2 124 x 60 x 80 80
SPEAKERS + SUBWOOFERS
BRH The Qube BRH is a three ways, tri-amp trapezoidal shaped full range enclosure equipped with single high efficiency 15” (LF),10” (MF) in a coaxial construction with 1,4”neodinium driver. The driver is fitted into RH horn which gives a well balanced frequency response throughout the field of coverage (60x40). The Qube BRH integrates the highest quality components with proven technology in a innovative design that delivers an amazing high output level for a cabinet of its size. Due to the coaxial design between the 10” and 1,4”the sound is produced from a one-point source field of frequencies, which greatly adds to clarity and transparency of the sound. The high sensibility (106 dB 1 watt/ 1 m) enables high power handling and efficient amplifier utilization, and gives the loudspeaker capability of delivering a sound pressure level @131dB. The loudspeaker handles in total 1660 watt (1 x 15” 800W, 10 “ 700W, 1,4” 160W) of power. The touring specified enclosure is constructed in durable 13 layer birch plywood and heavily braced for extra stabilization. The cabinets comes as standard equipped with extra reinforced flying hardware that runs from top to the bottom as well as heavy-duty handles for easy rigging and stacking. Qube BRH is by sound and size carefully matched with Qube TRS subwoowers.
TRS The TRS subwoofer has been developed to be used combined with BRH and all the other Qube speakers in high level entertainment application requiring great impact, obtainable only from high power subwoofers. The 18” woofer easily handles 1600 watts program power. The enclosure is built in durable 13 layer birch plywood, heavily braced for extra stabilization and resonance cancellation. The cabinet is equipped with heavy duty handles for easy rigging and stacking. TRS is painted in durable black paint and a heavy perforated steel grille is provided to protect the woofer from physical damages.
BRH
TECHNICAL SPECIFICATIONS Configuration Recommended amplifier Long term power Short term power (IEC 268-5) Nominal impedance Frequency response Low frequency woofer Mid frequency woofer High frequency driver Sensitivity (@1W/1m) Maximum SPL Dispersion Crossover frequency Recommended external controller Input connectors Net dimensions (WxHxD) Net weight
Ways Watt (rms) Watt Watt ohm @ -6dB inch inch inch dB dB H°xV° KHz
cm Kg
3 800/700/160 (LF/MF/HF) 400/300/80 (LF/MF/HF) 1600/1400/320 (LF/MF/HF) 4/8/8 (LF/MF/HF) 60 - 18KHz 15 - 3 coil 10-3 coil 2 - 2,5 coil 99/104/106 (LF/MF/HF) 128/132/128 (LF/MF/HF) 60° x 40° 0,35/1,6 SP 26 2 x Speakon 370 x 490 x 500 60
TRS 1600 800 3200 4 28 - 400 Hz 18”- 4 COIL
99dB 131dB Omnidirectional 0,1 external SP 26 2 X Speakon 83,5 x 54 x 81 65 23
POWER AMPLIFIERS
PA 80 The PA80 is a 300 W per channel power amplifier designed for all those applications where reliability and sound quality are of primary importance. It includes self-resetting protective circuitry to safeguard against damage, with LEDs indicating the status of each channel. Other characteristics include a ground lift switch and a selector for simple setting of stereo, 2-channel mono or bridge mode. The PA80 (300 W / 4 ohm) is ideal for use with QUBE STK II and Q12 speaker systems. The versatility of the system allows the use of a controller module to process the signal, optimising the overall performance of the speakers and protecting them at the same from possible damage.
PA 140 The PA 140 is a more powerful version of the PA 80, with the same technical specifications and the same reliability, but delivering superior performance. It provides 500 W of power per channel using a 4 ohm speaker system (350 W per channel with 8 ohm) and is the ideal amplifier for QUBE Q15, Q215, Q12 SUB and Q15 SUB speakers. The PA 140 can also be connected to a controller module.
TECHNICAL SPECIFICATIONS
24
PA 80
PA 140
Continuous power single channel driven (WRMS)
250 W 8 ohm - 390 W 4 ohm
380 W 8 ohm - 580 W 4 ohm
@ THD < 0,05%
Continuous power both channels driven (WRMS)
215 W 8 ohm - 300 W 4 ohm
350 W 8 ohm - 500 W 4 ohm
@ THD < 0,05%
Continuous power Bridge Mode (WRMS)
600 W 8 ohm
1000 W 8 ohm
@ THD < 0,05%
Impulsive power both channels driven (WRMS)
250 W 8 ohm - 400 W 4 ohm
470 W 8 ohm - 700 W 4 ohm
@ THD < 0,05% @ THD < 0,05%
Impulsive power Bridge Mode (WRMS)
800 W 8 ohm
1300 W 8 ohm
Input sensitivity
1.4 Veff
1.4 Veff
Input impedance
15k ohm min.
15k ohm min.
Slew rate
> 30 V/s
> 40 V/s
Signal to Noise ratio
110 dB w/A
107 dB w/A
Harmonic distortion (1 kHz - 4 ohm)
< 0,006
< 0,015
IMD
< 0,015%
< 0,04%
TIM
< - 80 dB
< - 80 dB
Frequency response
20 Hz - 20 kHz
20 Hz - 20 kHz
Damping factor
> 200
> 400
Max output voltage
73 Vp
90 Vp
Max current
16 Aeff
25 Aeff
Electrical input
920 VA
1500 VA
Power supply voltage
230 V
230 V
Protection
DC/thermal/SOA softstart
DC/thermal/SOA softstart
Cooling
variable speed fan
variable speed fan
Dimensions (HxVxD) cm.
48,2 x 8,8 x 48,7
48,2 x 8,8 x 48,7
Weight
14.6 kg
18.5 kg
@ 280 W
@ 8 ohm, 1 kHz
POWER AMPLIFIERS
PA 300 PA 300 is a 1500W per channel power amplifier designed for all those applications where reliability and sound quality are extremely important. It includes self-resetting protective circuitry to prevent any damage, with LEDs indicating the status of each channel. Other characteristics include a ground lift and selector of bridge mode. PA 300 is ideal to be used combined with Q15, Q215,Q18Sub,Qube BRH e TRS. The versatility of the power amplifier allows the use of controller module to process the signal, optimising the overall performance of the speakers and protecting them at the same time from possible damages.
PA 360 The PA 360 is a 1800W per channel power amplifier designed for all those applications where reliability and sound quality are for primary importance. It includes self-resetting protective circuitry to safeguard against damage, with LEDs indicating the status of each channel. Other characteristics include a ground lift switch and selector for simple setting of stereo bridge mode. The PA 360 is ideal for the use with Qube QSA 210 LINE ARRAY Speaker, Qube QS 218 SUB, Qube BRK and Qube RUT. The versatility of the system allows the use of a controller module to process the signal, optimising the overall performance of the speakers and protecting them at the same from possible damages.
TECHNICAL SPECIFICATIONS
PA 300
PA 360
Continuous power both channel driven (W RMS)
550W 8 ohm - 900W 4 ohm 1300W 2 ohm
850W 8 ohm - 1200W 4 ohm 1700W 2 ohm
@ THD < 0,05%
Continuous power bridge mode (W RMS)
2600W 4 ohm
3400W 4 ohm
@ THD < 0,05%
Impulsive power both channel driven (W RMS)
600W 8 ohm - 1000W 4 ohm 1500W 2 ohm
900W 8 ohm - 1250W 4 ohm 1800W 2 ohm
@ THD < 0,05%
Impulsive power bridge mode (W RMS)
3000W 4 ohm
3600W 4 ohm
@ THD < 0,05%
Input sensitivity
1,4 Veff
1,4 Veff
Input impedance
15 Kohm min.
15 Kohm min.
Slew rate
30 V/s
> 30 V/s
Signal to noise ratio
110 dB w/A
110 dB w/A
Harmonic distortion
<0,01 @ 500 W
<0,01 @ 750 W
IMD
<0,04%
< 0,015%
TIM
<80 dB
< - 80 dB
Frequency response
20 Hz - 20 kHz
20 Hz - 20 kHz
Damping factor
> 400
> 200
Max output voltage
100 V
85 Vp eff.
Max current
63 A
84 Aeff
Electrical input
2800 VA
3500 VA
Power supply voltage
230 V
230 V
Protections
DC/thermal/SOA softstart
DC/thermal/SOA softstart
Cooling
2 variable spin fans
2 variable spin fans
Dimensions (HxVxD) cm.
48,2x13,2x48,7
48,2x13,2x48,7
Weight (Kg)
30
30
@ 8 ohm,1 KHz
25
ANALOG CONTROLLERS
SP 12 BRK The SP12 BRK mono controller has been designed to optimise the overall performance of QUBE BRK speakers. The module slots into the back of PA300 and PA 360 amplifiers. The SP12 BRK provides the system with an equalisation stage that improves speaker frequency response and, thanks to a combination of protection systems, prevents damage to the cones when driven at maximum power.
Specifications Inputs Processed Outputs
Looping / Filtered Outputs
Connectors: XLR female - Impedance: 100k ohm - Type: Balanced - Level: +20 dBm nom. Connectors: XLR female - Impedance: 100k ohm - Type: Balanced - Level: +20 dBm max Frequency response: 0,5 dB, 20 Hz a 20 kHz (no EQ or crossover) - THD+N: < 0.002% @ 1 kHz Signal-to-noise ratio: > 102 dBV, 20 Hz a 20 kHz - CMRR: > 60 dB @ 400 Hz Gain: unitary, 20 Hz a 20 kHz (no EQ or crossover) - Crossover: 4th order, 24 dB per octave Protective circuitry: transients (fast acting signal limiter), Thermal (soft start limiter piloted by sensors with long time constant); excursion (reduction of gain dependent on frequency). Frequency response: 20 Hz a 20 kHz (looping) 100 Hz a 20 kHz (filt. out)
SP 12 RUT The SP12 RUT controller incorporate a high-pass crossover filter piloting the full-range section of the system as well as protection circuits designed to prevent damage to the cones when driven at maximum power.
Specifications Inputs Processed Outputs
Looping / Filtered Outputs
26
Connectors: XLR female - Impedance: 100k ohm - Type: Balanced - Level: +20 dBm nom. Connectors: XLR female - Impedance: 100k ohm - Type: Balanced - Level: +20 dBm max Frequency response: 0,5 dB, 20 Hz a 20 kHz (no EQ or crossover) - THD+N: < 0.002% @ 1 kHz Signal-to-noise ratio: > 102 dBV, 20 Hz a 20 kHz - CMRR: > 60 dB @ 400 Hz Gain: unitary, 20 Hz a 20 kHz (no EQ or crossover) - Crossover: 4th order, 24 dB per octave Protective circuitry: transients (fast acting signal limiter), Thermal (soft start limiter piloted by sensors with long time constant); excursion (reduction of gain dependent on frequency). Frequency response: 20 Hz a 20 kHz (looping) 100 Hz a 20 kHz (filt. out)
DIGITAL CONTROLLERS
SP 22 D - SP 22 Ds
SP22 D
SP22 is a 2-in/2-out digital signal processor (DSP) designed to optimise the performance of all loudspeakers in the QUBE range. Model SP 22 are easily installed in the rear panel of a QUBE amplifier, or it can be rack-mounted when using other power amplifiers (in this case the HCR 12/22 adapter is used to install two SP22 modules). The SP 22 digital control unit have been projected to control speaker (SP 22D) and woofer(SP 22Ds) cabinets. Model SP 22D is designed for use with 2-way full-range speakers (Q106, Q208, Q110, Q112, Q115, QM115); model SP 22Ds is designed for use with subwoofers (QS112, QS115, QS118, QS218). The main characteristics are as follows: • Frequency range equalisation to optimise frequency response and power response. • High precision control of power delivered to loudspeakers by means of an amplifier output sensing function. • Woofer excursion control • High pass filter • Fast rolloff crossovers (steep slope) • Delays on both channels to compensate for vertical misalignment • General delay on both channels from 0.25 m to 64 m. • 4 configuration modes: stereo/biamp/bridge/parallel • 2 XLR inputs • 2 parallel XLR outputs • 8 dipswitches to change the delay on both channels • 4-position selector for 4 configuration modes: stereo/biamp/bridge/parallel • 1 dipswitch (1) for SUB/PHASE selection: SUB mode activates the high pass filter when SP 22 is utilised to control a satellite; for the model SP 22Ds PHASE mode inverts the phase (180deg. rotation) on the subwoofer • 3 dipswitches (2/3/4) to select cabinet model (8 models) Specifications Inputs Impedance
XLR electronically balanced > 10kOhm
Outputs
2 x XLR in parallel / link
Performance Dynamic range Distortion Max. Delay Min. step Delay Max input level Max output level
>110dB 20Hz - 20kHz lin <0.02% @1kHz / +18dBm 31.875 mt 0.125mt 12.5 Vrms 2.8 Vrms
Equaliser & filters 8 full parametric equalizer HP filter LP filter Dynamic bass equalization
24dB/oct / 24dB/oct 24dB/oct / 24dB/oct
Additional features True power limiter with 2 channel sensing inputs Noise Gate
SP22 Ds
27
DIGITAL CONTROLLERS
HCR
hosting controller rack
HCR 12-22 is a 2-rack unit system designed to accommodate and power two SP 22D or SP 22Ds processors, equipped with all the necessary connectors for correct interfacing of processors and amplifiers. The rear panel of the HCR 12-22 processor is equipped with 12 connectors (6 for amplifier “1” and 6 for amplifier “2”); 2 XLR-M sockets (CH1 / CH2) carry the outputs for the unbalanced and processed signal outputs, to be connected to the amplifier inputs. 2 “Sensing” Speakons to which the amplifier power outputs are to be connected; 2 "Link" Speakons for connection of the loudspeakers.
QRC 32
network interface
All the Qube active series loudspeakers are equipped with a network interface (In-Trough) with RJ45 connectors, capable of driving cable lengths of up 100 mt. The QRC 32 USB interface features two channels marked A and B, each of which is possible to connect 16 speakers for a total of 32 . The QRC 32 , thanks to the intelligent HDD processor, built in the powered speakers, allows to control the following speaker parameters: • speakers operating status • built in amplifier operating status • heat sink temperature • output signal level • input signal overload • volume On/Off • 4 parametric equlisers • delay • 8 equalisation presets (default) • input gain The software is also equipped with accessory functions that make it possible to create and save groups, perform sequential power up, “solo function to identify individual speakers, and eq. bypass.
28
DIGITAL PROCESSOR
SP 26 D The SP 26 features 2 inputs and 6 outputs, each output feature crossover filters, 5 band parametric equaliser configurable as high and low shelving filters plus limiter and delay. Full metering is provided for inputs and outputs, with mute and access buttons allowing quick set up and gain adjustment. Features · 2 Inputs and 6 outputs provide for multiple crossover formats including full stereo 3 way. · 6 x 5 band parametric sections, plus high and low shelving filters for box equalisation. · High performance limiters on each output. · Precise 2.6 mS (less than 1mm) delay increment for perfect driver time alignment. · 80 non-volatile preset memories. · 19 User memories · Full and individual parameter locking. · Delay linking option allows speaker box alignment while keeping driver alignment. · Mono sub mix is provided. · Excellent sound quality · RS232 interfaces, provided as standard, allow connection to PC enabling quick and easy updates of software and presets. · Accommodates mains voltages from 70V to 260V without adjustment. · AES/EBU option is available. · Preset Manager Software allows easy preset definition. Specifications Inputs Impedance CMRR Outputs Source Imp Min. Load Max. Level Frequency Resp. Dynamic Range Distortion Maximum Delay Output gain Input gain Parametric Equalisation Filters Filter gain Centre frequency Filter Q / BW
Two electronically balanced. u > 10k ohms >65dB 50Hz - 10kHz Six electronically balanced. u < 60ohms 600ohm +20dBm into 600 ohm load ±0.5dB 20Hz - 20kHz >110dB 20Hz -20kHz. Unwtd < 0.02% @ 1kHz, +18dBm 650 mS. (Increment 2.6 µS) adjustable +15dB to -40dB in 0.1dB steps and mute adjustable +6dB to -40dB in 0.1dB steps 5 Sections per output +15dB to -30dB in 0.1dB steps 20Hz - 20kHz, 1/36 octave steps. (368 positions) 0.4 to 128 / 2.5 to 0.008
(Sections switched to shelving response) Low frequency 20Hz - 1kHz High frequency 1kHz - 20kHz Shelf gains ±15dB in 0.1dB steps High and Lowpass Filters Filters 1 of each per output Frequency (HPF) 10Hz - 16kHz, 1/36 octave steps Frequency (LPF) 35Hz - 22kHz, 1/36 octave steps Response Bessel / Butterworth 12/18/24dB per octave and Linkwitz-Riley 24dB per octave Limiters Threshold +22dBu to -10dBu Attack time 0.3 to 90 milliseconds Release time 2, 4, 8, 16 or 32 times the attack time Display 2 x 20 character backlit LCD Input meter 2 x 3 point, -24dB to digital clip Output meter 6 x 3 point, -24dB to +1dB into limit Connectors Inputs 3 pin female XLR Outputs 3 pin male XLR RS232 9 pin DEE connector Power 3 pin IEC. Power 60 to 250V ±15% @ 50/60Hz Consumption < 20 watts Weight 3.5kg. Net (4.8kg. Shipping) Size 1.75"(1U) * 19" * 11.8" (44 * 482 * 300mm) excluding connectors Options u = Transformers available 29
Due to continuing product improvement the above specifications are subject to change
CONNECTIONS EXAMPLES
LINE ARRAY MINIMUM SYSTEM
30
CONNECTIONS EXAMPLES
BRK-RUT MINIMUM SYSTEM
BRH-TRS 4 WAYS MINIMUM SYSTEM
31
Distibuito da:
FBT ELETTRONICA S.p.A.
www.qubeaudio.com
[email protected]
Zona Ind.le Squartabue - 62019 Recanati (MC) - Italy - P.O. Box 104 Tel. +39 071 750591 r.a. Fax +39 071 7505920
www.fbt.it •
[email protected]
