Preview only show first 10 pages with watermark. For full document please download

Qufast Shdsl L3+/s4

   EMBED


Share

Transcript

SHDSL LT / NT Device QuFast SHDSL L3+/S4 The QuFast SHDSL is a cost effective G.SHDSL router located in the customer premises. The modem terminates the 2-wire (2.3 Mbps) or 4-wire (4.6 Mbps) DSL line and provides Ethernet data interfaces for customer data connection. Features ² Easy configuration and management with password control for various application environments ² Efficient IP routing and transparent learning bridge to support Internet broadband services ² Virtual LANs (VLANs) offer significant benefit in terms of efficient use of bandwidth, flexibility, performance and security ² VPN pass-through for safeguarded connections ² Built-in advanced SPI firewall (Firewall Router) ² IP precedence to partition the traffic into multiple classes of service (Firewall Router) ² Four 10/100M Base-T Auto-sensing, Auto-negotiation and Auto-MDIX switching port for flexible local area network connectivity ² DMZ host/Multi-DMZ/Multi-NAT enables multiple workstations on the LAN to access the Internet for saving the cost of IP address ² Fully ATM protocol stack implementation over SHDSL ² PPPoA and PPPoE support user authentication with PAP/CHAP/MS-CHAP ² SNMP management with SNMPv1/SNMPv2 agent and MIB II ² Getting enhancements and new features via Internet software upgrade Configuration via Web Browser Technical Data SHDSL LT / NT Device QuFast SHDSL L3+/S4 Applications LAN Connection using QuFast via SHDSL VLAN 2 VLAN 3 VLAN 3 VLAN 2 LAN VLAN 1 2- / 4-wire VLAN 1 SHDSL 2.3 / 4.6 Mbps 10/100BaseT Ethernet QuFast SHDSL L3+/S4 QuFast SHDSL L3+/S4 Internet Access using QuFast via SHDSL QuFast SHDSL L3+/S4 2- / 4-wir e SHD SL 2 .3 / 4 .6 M bps SHDSL, Bridge, Router, Firewall ISP / ASP Co-Location DSLAM DSLAM Transport DSLAM Specification Routing Ø Ø Ø Ø Ø Ø Ø Ø Support IP/TCP/UDP/ARP/ICMP/IGMP protocols IP routing with static routing and RIPv1/RIPv2 (RFC1058/2453) IP multicast and IGMP proxy (RFC1112/2236) Network address translation (NAT/PAT) (RFC1631) NAT ALGs for ICQ/NetMeeting/MSN/Yahoo Messenger DNS relay and caching (RFC1034/1035) DHCP server, client and relay (RFC2131/2132) IP precedence (RFC 791) (Firewall router) Bridging Ø IEEE 802.1D transparent learning bridge Ø IEEE 802.1q VLAN Ø Port-based VLAN DSLAM Technical Data Security Ø Ø Ø Ø Ø Ø Ø SHDSL LT / NT Device QuFast SHDSL L3+/S4 DMZ host/Multi-DMZ/Multi-NAT function Virtual server mapping (RFC1631) VPN pass-through for PPTP/L2TP/IPSec tunneling Natural NAT firewall Advanced Stateful packet inspection (SPI) firewall (Firewall Router) Application level gateway for URL and keyword blocking (Firewall Router) User access control: deny certain access of PCs to Internet (Firewall Router) Management Ø Easy-to-use web-based GUI for quick setup, configuration and management Ø Menu-driven interface/Command-line interface (CLI) for local console and Telnet access Ø Password protected management and access control list for administration Ø SNMP management with SNMPv1/SNMPv2 (RFC1157/1901/1905) agent and MIB II (RFC1213/1493) Ø Software upgrade via web-browser/TFTP server ATM Ø Ø Ø Up to 8 PVCs OAM F5 AIS/RDI and loopback AAL5 ATM QoS Ø UBR (Unspecified bit rate) Ø CBR (Constant bit rate) Ø VBR-rt (Variable bit rate real-time) Ø VBR-nrt (Variable bit rate non-real-time) AAL5 Encapsulation Ø VC multiplexing and SNAP/LLC Ø Ethernet over ATM (RFC 2684/1483) Ø PPP over ATM (RFC 2364) Ø Classical IP over ATM (RFC 1577) PPP Ø Ø Ø PPP over Ethernet (fixed and dynamic IP) (RFC 2516) PPP over ATM (fixed and dynamic IP) (RFC 2364) User authentication with PAP/CHAP/MS-CHAP WAN Interface Ø SHDSL: ITU-T G.991.2 (Annex A, Annex B) Ø Encoding scheme: 16-TCPAM Ø Data Rate: N x 64 kbps (N=0~36, 0 for adaptive) (2-wire Router) Ø Data Rate: N x 128 kbps (N=0~36, 0 for adaptive) (4-wire Router) Ø Impedance: 135 Ohms LAN Interface Ø 4-port switching hub Ø 10 Base-T and 100 Base-T auto-sensing and auto-negotiation Ø Auto-MDIX Technical Data SHDSL LT / NT Device QuFast SHDSL L3+/S4 Hardware Interface Ø WAN: RJ-11 x 1 Ø LAN: RJ-45 x 4 Ø Console Port: RS232 female Ø Reset Button: Load factory default Indicators Ø General: PWR (Power) Ø WAN: LNK, ACT Ø LAN: 1, 2, 3, 4 (4-port Router) Ø SHDSL: ALM Physical / Electrical Ø Dimensions: 18.7 x 3.3 x 14.5 cm (WxHxD) Ø Power: 100~240 VAC (via power adapter) Ø Power Consumption: 9 Watts Max Ø Temperature: 0~45 °C Ø Humidity: 0%~95% RH (non-condensing) Memory Ø 2 MB Flash Memory, 8 MB SDRAM Order Information QuFast SHDSL CPE-L3+/S4 / 94-840-10400 G.shdsl 2/4-wire 2.3/4.6 Mbps router/bridge with 4-port switching hub, VLAN and business class firewall Quante Netzwerke GmbH Ahrensburger Straße 8 D-30659 Hannover Tel: +49 (0)511 / 74 01 92-0 ♦ Fax: +49 (0)511 / 74 01 92-100 www.quante-netzwerke.de All products are subject to continuous research and development; we therefor reserve the right to alter technical specifications without prior notice.