Transcript
WARRANTY TERMS CÂMERA
To use the camera simply tap the Camera icon, , to select the camcorder mode, change the mode to Camcorder on the icon on the right side of the screen, to take a photo or start recording, tap the circle on the side of the screen, the pictures were stored in the internal memory device and can be accessed through the application Gallery. .
* FOR MORE INFORMATION, PLEASE REFER TO THE MANUAL
3G CONNECTION (EXTERNAL) The Tablet supports 3G modem, so you can use a mobile phone sim card with 3G data plan to surf the internet when out of range of a Wi-Fi network. To make the connection, turn off Wi-Fi on the settings menu, then turn off the tablet and follow instructions below with the tablet off. Make sure that the 3G modem is compatible with this tablet, then insert a SIM card with data plan on 3G modem. The connection may be interrupted if the tablet comes into Stand By mode.
USER AVAILABLE IN MEMORY OF YOUR TABLET OR ACCESS:
www.multilaser.com.br
• To avoid this, increase the Standby time of you device.
*Modelo de modem compatíveis: Huawei E303, E173-s1, E173-s3 e Olicard 160
icon
appears at the right bottom side of the sreen.
The connection time may be extended for few a minutes, it depends on your operator signal intensity. In case the connection does not occur automatically, go to menu Settings>More…>Mobile Network Settings> Access Point Names, then choose the first option. After this procedure your tablet will be ready to surf the internet.
Turn off Wi-fi connection
• Click Menu> Settings> Display> Sleep, and then select the desired time. (It is desirable to select 30min. If you want to put the device in Stand By mode at any time, you can do so by pressing the On. / Off., Located on the side of the tablet.)
Acquire an USB OTG adaptor with the input as shown in the Image 1 to connect the modem on the tablet, then isert the the OTG in the Mini Usb input, image 2. Wait for a few seconds until the device recognizes the 3G modem and your operator network. The connection may be concluded as soon as the
This warranty does not cover any deffect for bad use or natural wear, or even IF it is not used according to our guidelines. This warranty does not cover any deffct caused by use of non original or non compatible peripherals and third party software installation. In case this product has a factory defect, since you can prove it, Multilaser is compromises to fix it or replace your product. The below cases are not covered by this warranty: • Natural use • Damages caused by liquids, high temperature (Hot or cold) • Oxidation or fungus • Shocks • Impacts • Damages caused t LCD because of bad use, pressing, shock or humidity This product is warranty covered for the period of 12 months and the accessories that are included in this kit are covered for 3 months from the acquisition day on. This certified is only valid under the presentation of the purchase receipt.
Image 1
Insert the SIM Card on the 3G Modem
Image 2
SAC SAC: www.multilaser.com.br
Quick Guide M7 . Tablet
STARTING YOUR DEVICE Remove the electrostatic adhesive and hold the POWER button to turn on the device, wait until the device is finished charging the operational system Android. To unlock the Tablet tap and slide the lock icon on the right side of the screen
SETTING AN E-MAIL ACCOUNT
DOWNLOADING APPS To download an application, tap the icon on the main menu of your device which can be accessed by the menu icon located in the upper right corner of the screen. . You will need a Google account to download, the account may be created on Google website or on the device by clicking on the icon follow the instructions on screen to complete the registration and then connect to the online store.
fri, 14 september sex, 14thde setembro
Press the indicated botton Tap and slide the icon
To configure your e-mail, go to the Applications menu, select the icon
ACCESSING THE MICRO SD CARD You can access files, music, videos and photos on your micro SD card.
To configure your access to a Wi-Fi network, go to the “Settings” menu,
To access the card, insert it into the identified slot on the side of the tablet, . When you start the application, put your e-mail address and password and click “Next”. Follow the next steps to complete the setup. Right after this operation you can receive your emails whenever the device is connected to a Wifi network.
go to the app menu and select the icon , select the tab “SD” menu located at the top of the screen, after that, you will see all the files stored on your card. It is recommended that files are stored in separate folders for easy viewing.
After finished the registration or login, applications download can be done. To download an application, simply select the app and tap the “Download” button, if it is a paid application, follow the onscreen instructions to register your credit card. While the application is downloaded you can track the status of the download in the status bar that appears on the screen. After the download is complete, the application will be available on the application menu.
CONNECTING TO A WI-FI NETWORK
, select the “ON” option in Wi-Fi that will appear in the list of options, as soon as you turn on Wi-Fi, the available networks will appear on the right side of the screen. To proceed with the connection, select the network you want, if the network is unlocked, the connection will be made automatically, otherwise, enter the network key to conclude the connection. If the connection does not occur, verify that the network key was entered correctly or if the network name contains some accent or character, acute accent, tilde or other. If this is the case, rename your network excluding any kind of accent or special characters.
CHARGING YOUR TABLET When using your device for the first time, make sure the battery is fully charged. If you need to recharge, connect the adapter included in the kit and plug into a 110V or 220V socket. Let it recharge for about 4 hours or until the device indicates that the battery is fully charged
.
If your battery discharge to 0%, the device may become inoperative, in this case, connect the charger, plug into the socket and restart your Tablet using the RESET button.
NAVIGATING THE INTERNET Before you surf the internet, make sure that your device is connected to a Wi-Fi network To start navigating, tap the icon “Browser” in the applications menu, then enter the address you want to visit and press ENTER.
PLAY STORE
Insert the SD Card in the indicated position
