Transcript
Quick Guide Omnidirectional IP66 Outdoor Microphone
Mo-1
Thank you for purchasing i3’s Mo-1 omnidirectional outdoor microphone.
Features/Model
i3’s Mo-1 outdoor omnidirectional microphone features an attractive and durable IP66-rated metal housing that is dust- and waterproof. With a 5 meter (16 ft) sound pickup radius and built-in Ambient Noise Cancellation, Mo-1 microphone delivers exceptional quality sound. When used together with i3’s Annexxus 65RM/75RM camera, Mo-1 microphone can be used for two-way audio communication between the camera site and Server or Client site. This microphone can be discreetly wall- or ceiling-mounted indoors or outdoors, up to 300m (1000ft) away from the Annexxus camera, for a wide range of applications, including schools, gas stations, transit, and retail.
Electrical
Mo-1 IP66 Outdoor Microphone
Sound pickup distance 5m (16 ft) radius Transmission distance
300 m (1000 ft)
Sensitivity
-32 dBV/Pa
Directionality
Omnidirectional
Signal-to-Noise Ratio (SNR)
75 dB (1M 40dB SPL sound source) 30 dB (10M 40dB SPL sound source) 1 KHz at 1 Pa
See the reverse side of this guide for the Annexxus 65RM (Audio)/75RM connection diagram.
Frequency response
100 Hz ~ 16 KHz
POWER SUPPLY
Audio output
Line Level (0 dBV, 600Ω @1KHz)
Power consumption
12V DC, 60 mA
This device requires the use of a DC12V power supply (not included). Incorrect voltage may cause irreparable damage to the microphone and will effectively void the warranty.
Ambient noise cancellation
Auto
WIRING REQUIREMENTS
Operational temperature -40ºC to 60ºC (-40ºF to 140ºF)
To extend an Audio cable run, use a 2-conductor shielded cable, 22 AWG minimum with a 24 gauge ground (GND) drain wire. Unshielded cable must not be used for audio systems.
Environmental noise
Mo-1 IP66 outdoor microphone with 2m (6ft) 3-wire cable Mounting guide pattern sticker x1 Plastic anchor x3 Round head screw (tapping type) x3
Φ 80mm x 20mm (3⅛” x 0.79”)
Weight
185 g (6.5 oz)
Housing
Metal alloy
Waterproof rating
IP66
Certifications
FCC/CE
Warranty Limited Warranty
DIMENSIONS (0.79 in)
20mm
IMPORTANT NOTICE When using this equipment as part of an audio monitoring system, follow all local and federal laws, including but not limited to providing visible notice of audio monitoring on premises.
80mm (3⅛ in)
COMPATIBLE WITH
i3 INTERNATIONAL INC.
5 years parts and labour
• • • • •
Annexxus 63C Annexxus 65RM (Audio) Annexxus 75RM SRX-Pro Server/Service v.6.0.X Video Pilot Client v.6.0.X
1.866.840.0004 www.i3international.com
U.S.A
4450 Witmer Industrial Estates Unit 4 Niagara Falls, NY 14305
i3-TRNG-CAMS-Mo-1-QuickGuide.indd
Ensure that the items received match those listed on the order form and the packing slip. In addition to this guide, the packing box includes:
Dimensions
Rev. 170817
PACKAGE CONTENTS
80mm (3⅛ in)
120 dB SPL maximum
Mechanical
Example of a recommended 2-conductor shielded cable.
1. 2. 3. 4.
Environmental Conditions
Canada 780 Birchmount Road, Unit 16, Scarborough, ON, M1K 5H4
Mo-1 Omnidirectional IP66 Outdoor Microphone. Connection Diagram to Annexxus 65RM (Audio)/75RM. Thank you for purchasing i3 Mo-1 Omnidirectional Microphone. Mo-1 Microphone requires 12V DC power, not included. Follow the connection diagram below to connect Mo-1 to an i3’s Annexxus 65RM (Audio)/75RM camera.
WIRING REQUIREMENTS:
Mo-1 microphone cable
2-conductor shielded cable, 22 AWG minimum with a 24 gauge ground (GND) drain wire. Unshielded cable is not suitable for audio systems and must not be used.
White wire Black wire Red wire 12 VDC cable GND wire
12VDC
Connect to Audio Input on the camera connection terminal Audio Ground on the camera connection terminal +12 VDC Power Connect to Audio Ground on the camera connection terminal
+
12V DC Power Supply, not included
i3 INTERNATIONAL INC.
Black wire. Connect to the GND (Audio Ground) terminal on the camera. Red wire. Connect to the +12V DC on the power source (not included).
Au/I
GND
Au/O
GND
COM
AO
GND
AI
Mo-1, Omnidirectional Microphone
White Mo-1 Audio In Black Mo-1 GND
Red Mo-1 Power Power GND To extend Power and GND cable runs, use a 2-wire 22 AWG (minimum) conductor.
1.866.840.0004 www.i3international.com
To extend the Audio cable run, use a 2-conductor shielded cable, 22 gauge (minimum) with a 24 gauge ground (GND) drain wire.
U.S.A
4450 Witmer Industrial Estates Unit 4 Niagara Falls, NY 14305
Annexxus 65RM (Audio)/75RM, Back box removed. I/O connection terminal.
Rev. 170817
Mo-1 cable
White wire. Connect to the Au/I (Audio Input) terminal on the camera.
Canada 780 Birchmount Road, Unit 16, Scarborough, ON, M1K 5H4
