Preview only show first 10 pages with watermark. For full document please download

Quick Install Guide For Cfs Webmanager

   EMBED

Share

Transcript

CFS WebSuite Quick Install Guide For additional information please refer to the CFS WebSuite User Guide. 1 | CFS WebManager Installation  1.1 Insert Canvys software CD labeled “Image Systems” into the CD drive.  1.2 Click the Install CFS WebManager button. After install is complete CFS WebManager icon will be created in the Windows System Tray (which is typically located in the lower right corner).  1.3 Double-Click the CFS WebManager (WMcfs) icon in the Windows System Tray.  1.4 Click “Help” and then “License Code” from the top navigation bar of the open WebManager interface.  1.5 If a license code has been provided, enter it in the blank text box and click the Confirm button. If a license code has not been provided, go to www.teklink.canvys.com or call 800-235-2125 to obtain a code.  1.6 Restart the server. 2 | Logging into CFS WebManager  2.1 Open a web browser and type in the IP address of the server into the browser address bar. Example: http://192.168.0.100 NOTE: CFS WebManager uses the default TCP/IP port 80. If another web application is using port 80, it is necessary to configure CFS WebManager to use another open TCP/IP port. To do this, follow the steps below. - Login to the server on which CFS WebManager is installed. Double click the CFS WebManager icon located in the Windows notification area. Select “Setup” and then “HTTP.” Change the Port Number to an open port number. Example: 99. The IP address of the CFS WebManager login page will now look like http://192.168.0.100:99 - Restart the server.  2.2 Type in admin for the User Name and leave the Password field blank.  2.3 Click Login. NOTE: Workstations will not appear in CFS WebManager until the CFS Local clients have been configured. www.canvys.com Revised 07/25/2012 Page 1 of 2 3 | CFS Local Configuration  3.1 Install CFS Local if it is not already installed. Please refer to Quick Install Guide for CFS.  3.2 Double click the CFS icon in the Windows System Tray.  3.3 On the General Tab, locate the HTTP Interface section.  3.4 Type the IP address or Hostname of the CFS WebManager server in the CFS WebManager Name/IP field.  3.5 Type a group name into the Hierarchical Group Name field. Example: Radiology. NOTE: If a sub group is desired such as the hospital or site name type the group name as “Hospital A/Radiology.” NOTE: CFS Local will automatically establish a connection with CFS WebManager and display Active next to Activity Level. If Active is not displayed, please refer to the troubleshooting section of the CFS WebSuite User Guide. www.canvys.com Revised 07/25/2012 Page 2 of 2