Preview only show first 10 pages with watermark. For full document please download

Quick Reference Guide: Inter

   EMBED

Share

Transcript

Wireless Telephone Quick Reference Guide Inter-Tel Eclipse Associate Display Phone Line + 7 Line + 1 Line + 8 Line + 2 Line + 9 Line + 3 FCN + 3 Line + 4 FCN + 4 Line + 5 Call 1 Call 2 Call 3 Call 4 IC Outgoing HOLD FCN + 1 FCN + 2 MUTE FWD TRANS MUTE FWD Transfer FCN + 7 FCN + 8 REDL Redial FCN + 5 CNF CNF SPCL FCN + 9 SPCL SYSPD Sys SPDL Spkr Page Zone Line + # Sta SPDL Line + 6 Vol up Page DND FCN + 6 MSG Line +* BGM Vol down MSG Associate Display Phone The diagram above shows how the Associate Display Phone keys correspond to the Wireless Telephone. SpectraLink 6020 Wireless Telephone On/Off Press and hold END. Two chirps on, one chirp off Pressing LINE followed by a digit (1-9) on the Wireless Telephone is equivalent to pressing one of the line keys on the Associate station set. Make a call Press START to get dial tone. Hang up Pressing FCN followed by a digit (2-9) on the Wireless Telephone is equivalent to pressing one of the feature buttons on the Digital Keyset. FCN + # is equivalent to using the Special Key. Press END. Be sure to do this at the end of each call. Answer call Press START. Line indicator comes on steady when the call is answered. LINE + # increases your volume level on the Wireless Telephone, and LINE + * decreases your volume. Answer second call Press HOLD to put your current call on hold, or END to hang up. Press LINE + the digit that is flashing. Function Key Strokes Default Settings FCN + 1 MUTE FCN + 2 FWD Fill In Your Feature Settings FCN + 3 Take off Hold Mute On/Off FCN + 4 Function FCN + 5 CNF FCN + 6 MSG FCN + 7 REDL FCN + 8 TRANS FCN + 9 SYSPD FCN + # SPCL FCN + * (Exits menus) 1725-36153-001_E Hold Eclipse and Associate are trademarks of Inter-Tel, Incorporated User Options Press HOLD Press LINE followed by the digit for the line on hold, which will be flashing. Press the MUTE softkey. Pressing FCN while off hook allows you to scroll through menu screens. Press the CFG softkey while on hook to change handset settings. For information on Battery Pack charging and setting user preferences, see the Wireless Telephone User Guide. For technical support, please contact your facility’s Network Administrator.