Preview only show first 10 pages with watermark. For full document please download

Quick Reference Guide To Set The Time To Program The Auto Off

   EMBED

Share

Transcript

Quick Reference Guide to set the time Turn Function Dial to Clock. Press and hold Hour or Minute button until clock begins flashing. Hold down or press and release button until desired time is displayed. Numbers will stop flashing. to program the auto off Turn Function Dial to Auto Off. Follow “Set Time” instructions in the Instruction Booklet to program coffeemaker to shut off 0 to 4 hours after brew cycle is finished. to program the auto on 1. Turn Function Dial to PROG; the AUTO ON LED will flash. Follow “Set Time” instructions to program brew-start time. Turn Function Dial to AUTO ON and press the On/Off button. The green AUTO ON light signals advanced brew-start function is on. 3. To start the brew cycle at the same time the next day, turn Function Dial to AUTO ON and press the release On/Off button once more. The green Auto On light will turn on. 2. At the programmed time, the blue On/Off indicator light will come on, to indicate brew cycle is starting. Coffee on Demand™ 12-Cup Programmable Coffee Maker Please see reverse side for Setup and Use Setup and Use 1. 2. 3. 4. Fully immerse the charcoal water filter in cold tap water and soak for 15 minutes (see complete instructions on pages 6-7 of your Instruction Booklet). Insert the filter into the water filter holder. Open the lid to the water reservoir and place inside. Insert the permanent gold tone or paper filter into the filter basket holder. Using the scoop provided, add 1 scoop of ground coffee per cup - you can adjust the amount to taste. Make sure the filter basket is securely in place and lid is completely closed. 5. When brew cycle is complete, five beeps sound and On/Off indicator light will turn off. Place mug or cup on drip tray and press lever to pour coffee. The cup area lights up when the lever is pressed to pour coffee. Remove and fill water reservoir for number of cups you’re brewing. Replace reservoir, pushing down firmly in place. Plug in unit, turn Function Dial to Brew, press the On/Off Button and the blue indicator will light up. To delay brew start, turn dial to Auto On. Green Auto On will light up. IMPORTANT! Do not throw away. Read before operating your new coffeemaker. Keep for quick reference. This guide is a supplement to the instruction booklet. To ensure proper operation and optimum performance, please read the entire Instruction Booklet. PG-26977A