Transcript
4 WATCH A RECORDED PROGRAM
POWER PLAY
* You can use the available buttons on the remote control or on the VCR.
1 2 3 4
REW
Load a cassette with the label facing out and the window facing up. Press REW or FF (remote) to find program start point. Press PLAY to start playback. Press STOP (remote) or STOP/EJECT (VCR), then press STOP/EJECT to remove the cassette.
1 Load a cassette as above. 2 Press CH, or press the appropriate NUMBER keys (remote) and press ENTER (remote), to select the recording channel. Press SP/EP (remote) to set the recording speed. Press REC and PLAY together (remote) or REC (VCR) to start recording. Press PAUSE to stop recording temporarily, and press PLAY to resume. Press STOP or STOP/EJECT, then press STOP/EJECT to remove the cassette.
b–INSTANT TIMER RECORDING
JOG
SHUTTLE
MENU VIDEO (MONO)L—AUDIO—R
CH
OK SP EP VCR
REC
STOP/EJECT
E D I U
PAUSE
* T R E A ST ND US
T
A
E
S SY
A OE
P TU
CH ¶Ä
REC
The Path To Enjoyment Starts Here . . .
PAUSE
STOP/EJECT ENTER
CABLE/ DBS
TV
MBR SET A/B
POWER
TV/VCR
1
2
3
4
5
6
DBS
DAILY(M-F)
WEEKLY
9
2
PLAY
7
8
C. RESET
AUX
CANCEL
0
START
STOP
NUMBER
TIMER
DATE
4
CH
PROG CHECK
PROG
REW (Rewind)
SP/EP
SKIP SEARCH
PLAY
FF
REW
REC
REC
MENU
STOP
STOP
TV CH +
PLAY BACK A TAPE
1 3
CHECK PACKAGE CONTENTS
5
RECORD A PROGRAM
SET CLOCK AND TUNER
CH +/–
EXPRESS PROGRAMMING
1
SITUATE AND CONNECT VCR
2 4
POWER
TV/VCR ENTER/OSD DISPLAY
MONO/Hi-Fi/SUPER VHS VIDEO CASSETTE RECORDERS
* Please refer to the HR-VP674U’s instruction manual for more detailed information.
AG
* You cannot perform ITR using the remote control.
1 Press REC to start recording. 2 Press REC to engage ITR. “0:30” appears in the VCR display. 3 To extend duration in increments of 30 minutes, press REC as many times as necessary.
I U Q
POWER
a–BASIC RECORDING * You can use the available buttons on the remote control or on the VCR.
CK
FF
PLAY
5 RECORD A PROGRAM
SP/EP FF (Fast-Forward)
1
MAKE SURE THAT YOUR PACKAGE CONTAINS:
PAUS
E
3 OK
VIDEO CASSETTE RECORDER
PAUSE
RF CABLE (F-TYPE)
CONTROLLER
1
2
3
4
5
6
7
8
9
2
0
4
VO
L
L
+
TV
SHUTTLE PLUS
INFRARED REMOTE CONTROL UNIT
O
3 4 5 6
Dear Customer, Thank you for purchasing this JVC Video Cassette Recorder.
–
TV
V
“AA” BATTERY x 2
TV CH –
1
3
SP
P VCR
MULTI BRAND REMOTE CONTROL UNIT
U
Printed in Malaysia 1198 IYV MW PJ
*
*
COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.
LPT0162-002A
2
SITUATE AND CONNECT YOUR NEW VCR
a–BASIC ANTENNA/CABLE CONNECTION ● If you’re using a Cable Box, . . . . . . go to 2b (CATV CONVERTER CONNECTION) . ● If you’re using an AV connection, . . . . . . go to 2c (AUDIO/VIDEO CONNECTIONS). ● If you’re using an RF connection, . . . . . . go directly to 3 (PLUG & PLAY).
surface. 2 Disconnect your antenna or cable line from your TV. 3 Connect your antenna to your VCR. 4 Connect your VCR to your TV.
RF CONNECTION COMBINED VHF/UHF
OUT
IN
Cable Box
Back of VCR (example only)
Back of TV (example only)
ANT. IN RF OUT VHF/UHF
SEPARATE VHF/UHF
VHF ONLY VHF
SET YOUR VCR'S CLOCK AND TUNER
CATV Input
CATV Input
PLUG & PLAY
ANT. IN
To TV TV
RF OUT
VCR
5 After completing the basic connections:
1 Place the VCR on a stable, horizontal
3
b–CATV CONVERTER CONNECTION
TV
ANT. IN
From Cable Box
The VCR's clock and tuner channels are set automatically when the VCR is plugged into the AC outlet. If you use a cable box, Plug & Play will not function; set the clock and tuner channels manually. (Z pg.11 – 15 of the HR-VP674U’s instruction manual)
From VCR
RF OUT
To TV
VCR
With this connection you can view/record any cable channel including scrambled channels to which you have subscribed.
OUT
IN
Cable Box
With this connection, you can view one scrambled cable channel while recording another unscrambled channel.
1
To watch TV with this type of connection
To watch TV with this type of connection
1 Press TV/VCR on remote to engage VIDEO
1 Press CH or NUMBER keys to select desired
mode. 2 Tune TV to VCR output channel (3, 4 or AV mode). 3 Tune VCR to Cable Box output channel. 4 Select desired channel on Cable Box. •You can only view the channel you’re recording. •You cannot change channels with the VCR remote control.
Plug the VCR into the AC outlet.
channel for recording.
2 Press TV/VCR to engage TV mode. 3 Tune TV to Cable Box output channel. 4 Select desired channel on Cable Box. •You cannot record scrambled channels. •To play back a tape, you must tune the Cable Box to the VCR output channel.
2
UHF ONLY VHF UHF
CABLE TV LINE
Note: Exact connector positions and names may differ.
Don’t press any buttons on the VCR or remote during auto setup.
c–AUDIO/VIDEO CONNECTIONS
● CONNECTORS WHICH ARE OR MAY BE REQUIRED: n RF Cable
n Antenna Splitter
n 300-75 ohm Matching Transformer
n VHF/UHF Antenna Mixer
n Antenna Splitter
3
Hi-Fi VHS VCR g AV STEREO TV
VIDEO OUT
VIDEO IN
L AUDIO OUT R
L AUDIO IN R
SUPER VHS VCR g AV STEREO TV WITH S-VIDEO INPUT TERMINALS
MONAURAL VHS VCR g AV TV
S-VIDEO OUT
S-VIDEO IN
VIDEO OUT
VIDEO IN
VIDEO OUT
VIDEO IN
AUDIO OUT
AUDIO IN
L AUDIO OUT R
L AUDIO IN R
To Listen To VCR Sound Through A Component Stereo Audio System, Connect As Shown
During auto channel setting, the channel numbers are displayed as they are scanned and set. Receivable channels are automatically assigned to CH buttons, and non-receivable channels are skipped.
5
UHF
AV connection methods differ from one type of VCR to another. First, for any TV and VCR type, connect your VCR to your TV using RF connection. Then make AV connections following one of the methods pictured to the right. After making the connections, go to 3 (PLUG & PLAY).
4
VCR VIDEO OUT L AUDIO OUT R
TV
Monaural deck owners: Connect to VCR's AUDIO OUT
AMP
When setting is complete, the VCR displays the current time. You can now use your VCR.
“AUTO” blinks while the VCR automatically sets the clock using information provided by the local PBS channel. NOTES: ● If the time displayed in 5 is incorrect, perform the Semi-Auto or Manual Clock Set procedure (refer to page 12 or 13 of the HR-VP674U’s instruction manual). Auto channel set has already taken place, and is not affected. ● There are some PBS channels that do not transmit clock setting data. If your antenna cable is properly connected and “– – : – –” is displayed, perform the Manual Clock Set procedure (refer to page 13 of the HR-VP674U’s instruction manual). Auto channel setting has not yet taken place, so please also perform the “Set Receivable Channels” procedure (refer to page 14 of the HR-VP674U’s instruction manual).
