Transcript
1
LITHIUM ,,
Installation Please register product warranty at www.Lithium PowerInc.com/customer-service.php.
b) Remove the dirt bin.
Please refer to Neato’s manual for battery installation.
®
POWER INC Before the initial use, please perform the following steps below to reconnect the Neato® and the battery.
Lithium replacement battery for Neato® XV series
c) Locate the ON/OFF switch.
2
Reconnect your battery (Only to newer Neato XV models; For older models, please skip to step 3.) Please place the XV onto the charging dock that is plugged into a power outlet and restart the XV.
Quick Start Card
a) Pull up on the dirt bin.
Page 1 of 2
d) Push the switch UP and then DOWN to reconnect your Neato®. Replace the dirt bin.
b) Press the arrow buttons to select Support and then press SELECT.
4
Please note, Neato® XV will stop operating after cleaning cycle is completed regardless of power remaining.
Thank you very much for choosing our product and services. If you need any further assistance, please contact the Lithium Power Customer Service department at (408) 837-0206 or by Email at
[email protected].
Switch device is a protection design for storage and transportation.
3
Restart your robot Our batteries are designed with a sleep-mode that deactivates the battery after a period of inactivity in order to provide a longer operating time and longer battery life. It may be necessary to reactivate the battery before use. a) Press MENU on LCD screen.
c) Use the arrow buttons to select New Battery and then press SELECT.
Your battery is now activated. Please charge the battery for 8 hours before the initial use. Last longer, clean better. © 2015 Lithium Power Inc. All rights reserved. Neato® is a trademark of Neato Robotics, Inc.
Page 2 of 2
LITHIUM ,,
POWER INC
®
