Transcript
Quick Start Guide 2-in-1 USB to USB On-the-Go (OTG) Adapter Cable USB A (Male) + Micro-USB B (Male) to Micro-USB B (Male) Model: U050-07N-OTG USB A (Male) + Micro-USB B (Male) to USB A (Female) Model: U052-06N-OTG-AM Features • USB 2.0 charging and data • Supports On-the-Go (OTG) transfer rates up to 480 Mbps devices
• Plug-and-Play; No drivers or software required
Using the 2-in-1 Connector To extend the Micro-USB connector: 1 Place a thumbnail or
2 Using your fingers, pull the 3 The white button C will lock fingernail in the white slit the Micro-USB connector Micro-USB connector out B . A located on the bottom of Note: You can alternately use into place. the USB A connector. Slide a fingernail in the second slit to further extend the Micro-USB the connector forward. connector.
A
1
B
2
3
C
PROTECT YOUR INVESTMENT! Register your product for quicker service and ultimate peace of mind. You could also win an ISOBAR6ULTRA surge protector—a $50 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support Copyright © 2015 Tripp Lite. All rights reserved.
15-04-063-933443-V2.indd 1
5/1/2015 11:25:50 AM
Using the 2-in-1 Connector To retract the Micro-USB connector: 1 Place a thumbnail or fingernail on the
white button A and push the Micro-USB connector inward.
A
1
2 When fully retracted, the white button B will lock the Micro-USB connector into the USB A connector.
2
B
Connecting Devices U050-07N-OTG • The 2-in-1 Micro-B male connector plugs into an OTG compliant phone or tablet and the standard Micro-B male connector can plug into an OTG compliant or non-OTG compliant phone or tablet. The phone or tablet using the 2-in-1 Micro-B connector will act as the host device, allowing it to access the other phone/tablet’s files, as well as provide power to that other device
OTG Host Connector
• When using the 2-in-1 USB A male connector, the cable acts as a standard Micro-B to A cable. OTG Host Connector Connecting the non-OTG Micro-B male connector to a device (OTG compliant or not) and the USB A male connector into a computer’s USB port will allow the computer to access the connected device’s files, enable syncing, and provide the phone or tablet with power.
U052-06N-OTG-AM • 2-in-1 Micro-B male connector plugs into an OTG compliant phone or tablet and the USB A female port can connect to any peripheral (keyboard, mouse, etc.) for use with an OTG device.
OTG Host Connector
OTG Host Connector
• When using the 2-in-1 USB A male connector, the cable acts as a standard extension cable for a computer.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 15-04-063 93-3443_RevA
15-04-063-933443-V2.indd 2
5/1/2015 11:25:52 AM
