Transcript
Therapure 540 Germicidal Air Purifier ®
Quick Start Guide
Use only as described in the Therapure® manual. To reduce the risk of electric shock, do not attempt to service the product in any way other than in the manner described in the “Cleaning & Maintenance” section of the users manual. For questions or before you return, please call 1.800.875.8577 or visit us at www.envionproducts.com P.O. Box 9159 | Van Nuys, CA 91409-8291
©2015 Envion, LLC. All Rights Reserved. Patents pending. TPP540-022615
Therapure 540 Germicidal Air Purifier ®
Quick Start Guide
Please be sure to read the manual carefully to ensure optimal performance and safety. 1. Remove Features & Benefits sticker from front panel. 2. Place on a level surface . a. Do not place near fans. b. Keep both sides of the unit at least one foot away from a wall. c. Do not place the unit near curtains. d. Placing the unit close to the source of air pollution is an effective way to improve indoor air quality. 3. Plug in unit. 4. Press power button to turn on. 5. Press UV/VOC button to turn on the UV/VOC feature. 6. Press the Speed button to choose Low, Med, or High. The speed state will be shown in the LED display. 7. Press the Time Button until the desired amount of hours you want the air purifier on is displayed. The Therapure® timer goes from 1-24 hours. 8. The Clean Filter Light Indicator will illuminate when it is time to vacuum your filter. See the manual’s “Cleaning & Maintenance” section for instructions on how to clean the filter. 9. The NIGHT MODE button turns off the blue indicator light as well as the lights in the display.
