Transcript
Quick Start Guide
Welcome to your new JT Smart 2 This guide is designed to help you get started. To download the complete JT Smart 2 user guide check out our Help & Support area at www.jtglobal.com/help
Front camera
Power button
Loudspeaker
Earpiece speaker
Volume up Volume down
Microphone
Rear camera
Micro USB charging point
Headset jack
1. Insert your SIM card, battery and optional Micro SD card 1.1. To remove the back cover, pull up from the bottom right corner of the handset. The cover is flexible and may bend when you remove it. 1.2. Insert your SIM card into the primary SIM slot labelled SIM1. If you have a second SIM card and wish to use the dual SIM functionality, insert the SIM into the secondary SIM slot labelled SIM2. 1.3. Insert your optional Micro SD card into the slot labelled Micro USB slot. 1.4. Finally, insert the battery with the gold contacts aligned.
2. Set up your Smartphone 2.1. Turn on the handset by holding the power on button on the side of the handset for at least 2 seconds. 2.2. Enter your SIM PIN (if required). 2.3. The set-up App will open. The set-up App requires a network connection, so please ensure your Smartphone is connected to a mobile network or within range of a Wi-Fi network. 2.4. Follow the on-screen instructions. 3. Transfer information to your JT Smart 2 3.1. To transfer your contacts, pictures and other info from your old device, please ensure that your contacts are saved to your existing SIM card and any other media to your Micro SD memory card. Please insert your SIM card and Micro SD card to access your data.
www.jtglobal.com Search ‘JTsocial’
