Preview only show first 10 pages with watermark. For full document please download

Quick-start Guide

   EMBED


Share

Transcript

Quick-Start Guide ™ SeriaLinc Pass-through outlet – INSTEON® to 2-Way RS-232 Serial Converter Model: 2410S Introduction Connect any serial and/or RS-232 compatible devices to your INSTEON network. From whole-home audio to security systems to automation controllers, you can now keep the equipment you already own and take advantage of a reliable INSTEON network. SeriaLinc is a 2-way serial, meaning it can be used to control RS232 devices or to control INSTEON devices via RS-232 commands. Set button Null Modem Adapter What is Included System Requirements • • • • • • • SeriaLinc RJ-45 (male) to DB-9 (female) serial cable Null modem adapter Free software download Status LED SeriaLinc Windows 2000, XP, or Vista (32-bit) 15MB free disk space Minimum 128MB RAM Installation Before beginning installation, be sure you have downloaded the SeriaLinc Downloader application and created a CSV file (see Owner’s Manual). 1) 2) 3) 4) 5) Plug SeriaLinc into an electrical outlet (make sure SeriaLinc will be able to reach your computer with the included serial cable or use an extension cord) Tap the Set button on SeriaLinc to enter Configuration Mode The SeriaLinc Status LED should begin blinking Connect SeriaLinc to your computer using the included serial cable In the SeriaLinc Downloader application, open the CSV file Devices that are responding to serial codes (defined as 1 in the CSV file) will need to be Linked to SeriaLinc according to their defined group number (third parameter on the same line in the CSV file) a. Click the appropriate button on the right side of the application interface for SeriaLinc to enter the defined group’s Linking Mode b. Press & hold the Responder’s Set button for 3 seconds c. Repeat steps A and B as needed 6) 7) Choose the com port SeriaLinc is connected to Select “Download to SeriaLinc” 8) When prompted, unplug SeriaLinc and plug it back in, making sure not to tap the Set button The SeriaLinc Status LED should stop blinking Close the SeriaLinc Downloader application 9) 10) Plug SeriaLinc into your RS-232 device using the included null modem adapter Complete Instructions, Troubleshooting, and Tech Support Owner’s Manual: www.smarthome.com/manuals/2410s.pdf Call: INSTEON Gold Support Line at 800-762-7845 Page 1 of 1 Rev. 03-14-2011 Smarthome Limited Warranty – Smarthome warrants to original consumer of this product for a period of 2 years from date of purchase, this product will be free from defects in material & workmanship & will perform in substantial conformity with its Owner's Manual. Warranty shall not apply to defects caused by misuse or neglect. U.S. Patent No. 7,345,998, International patents pending © Copyright 2011 Smarthome, 16542 Millikan Ave., Irvine, CA 92606, 800-762-7845