Quick Start Guide For Cks503bt-01.cdr

Transcript

Quick Start Guide Setup for iTOMA CKS503BT Instruction are subjected to change without notice. Preparation for Using When AC Power Adapter plug into the AC Outlet, Time will be displayed and set automatically. It is default to the Eastern Time Zone (New York Time). Setting the Time Zone / DST (Setting with Power OFF) Daylight Saving Time (DST) will be switching automatically. However, if you found the clock did not change the DST, or the time was suddenly run an hour ahead or behind, you can adjust the hour of the time by repeating the above steps 1 to 4.(For U.S. only) Press and Hold “SET” for 2s. Press “▼” and “▲” adjust HOUR to your Time Zone Press “SET” to confirm Setting the Alarm (Setting with Power OFF) STEP1 Press “AL1/V-” button repeatedly to select your wake up mode STEP2 Press and hold the “AL1/V-” button for 2 seconds, the “Hour” of wake up time will blink. Press “▼” or “▲” to adjust the Hour. STEP3 Press the “AL1/V-” button again, the “Minute” of wake up time will blink. Press “▼” or “▲” to adjust the Minute. Setting the Alarm (Setting with Power OFF) STEP4 Press “SNOOZE/DIMMER/SLEEP” button to select the alarm day mode STEP5 Press “AL1/V-” button. Press “▼” or “▲” to adjust the Volume. Tips :Please follow the above steps for setting the Alarm 2 (by pressing AL2/V+). Listen to the Radio STEP1 Press “ /MODE” button to turn ON the clock STEP2 Press “ /MODE” button again to switch the function mode to Radio Press either “▼” or “▲” to adjust the radio frequency. STEP3 STEP4 When you set and listen to the desired station, you can press either “AL1/V-” or “AL2/V+” to adjust the radio volume level. Press “ /MODE” button for 2s to turn OFF the radio. Store a station STEP1 Press “ /MODE” button to turn ON the clock STEP2 Press “ /MODE” button again to switch the function mode to Radio Press either “▼” or “▲” to adjust the radio frequency. STEP3 STEP4 Press and hold the “SET” button for 2 seconds until program number appear on the display and blink. Press the “SET” button again and the desired radio station will be stored in the selected program number. Press “ /MODE” button for 2s to turn OFF the radio. Recalling the stored stations STEP1 Press “ /MODE” button to turn ON the clock STEP2 Press “ /MODE” button again to switch the function mode to Radio Press either “▼” or “▲” to adjust the radio frequency. STEP3 STEP4 Press “SET” button and you will see the last Program number shows on the display. Either press the “SET” button, “▼” or “▲”to change the program number in order to find your stored radio station. Press “ /MODE” button for 2s to turn OFF the radio. Thank you for choosing iTOMA product! You can read CKS503BT User Manual for more details about operating. If you had any question, feel free to contact us: [email protected] [email protected] Or visit: www.itoma.com.hk for more details.