Preview only show first 10 pages with watermark. For full document please download

Quick Start Guide Sp131 Version: 1.0 - 2014-12-12

   EMBED


Share

Transcript

PUBLIC Fujitsu Server Power Appliance for SAP Adaptive Server Enterprise 15.7 SP131 Version: 1.0 - 2014-12-12 Quick Start Guide Content 1 Quick Start Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Preparing for Deployment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Setting up the Fujitsu Power Appliance for SAP ASE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3.1 Sample DHCP Configuration Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3.2 Sample Static IP Configuration Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 Checking and Applying Available SAP ASE Support Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4.1 Verify the SAP ASE Version Number Installed on the Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 4.2 Downloading Support Packages From the SAP Software Download Center. . . . . . . . . . . . . . . . . . . . . . 14 4.3 Shutting Down the Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.4 Installing SAP ASE Support Packages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.4.1 5 2 Manually Starting Backup Server and SAP Control Center. . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Managing and Monitoring SAP ASE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. Quick Start Guide Content 1 Quick Start Guide ® ® ® The Fujitsu Server Power Appliance for SAP Adaptive Server Enterprise (Fujitsu Power Appliance for SAP ASE) is an extreme online transaction processing (OLTP) appliance built from the latest generation of hardware and flash storage technology, to meet the requirements and needs of the extreme OLTP environment. ® ® Your Fujitsu Power Appliance for SAP ASE includes SAP Adaptive Server Enterprise (SAP ASE) 15.7 SP131 software, preinstalled on the server, and one of the following Fujitsu hardware servers: Appliance Server Storage Entry PRIMERGY RX2540 1 TB database on local flash storage - LSI Nytro WarpDrive 8 cores, 256 GB RAM, including all necessary HW/SW and tuning settings Midsize Enterprise Data Center Data Center PRIMERGY RX2540 5 TB database 16 cores, 256 GB RAM, including all necessary HW/SW and tuning settings Violin V6212 flash memory array PRIMERGY RX4770 10 TB database 32 cores, 384 GB RAM, including all necessary HW/SW and tuning settings Violin V6224 flash memory array PRIMERGY RX2540 up to 100 TB database up to 24 cores, up to 512 GB RAM, including all necessary HW/SW and tuning settings NetApp FAS Flash-Accelerated Storage PRIMERGY RX4770 up to 100 TB database up to 60 cores, up to 1024 GB RAM, including all necessary HW/SW and tuning settings NetApp FAS Flash-Accelerated Storage Additional information about how to manage and monitor SAP ASE is available at http://help.sap.com/adaptiveserver-enterprise/. SAP ASE 15.7 SP131 is installed on the Fujitsu Power Appliance for SAP ASE, however support packages may be available. Note To install SAP Business Suite applications, refer to the respective application’s installation guide. Fujitsu hardware documentation is available at http://manuals.ts.fujitsu.com . Related Information Checking and Applying Available SAP ASE Support Packages [page 13] Quick Start Guide Quick Start Guide PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. 3 2 Preparing for Deployment SAP ASE software comes preinstalled on the server. However, you must finalize the configuration and deployment of this network appliance. Context If the server is installed in a rack, review these considerations before starting installation. Procedure 1. 2. Verify that you have, or obtain, the following equipment, which is not included with the product: ○ Ethernet network cable type CAT5e or better ○ USB keyboard ○ USB mouse ○ Display monitor Before starting the server, determine: ○ The Network Time Protocol (NTP) IP address if you use this time service to synchronize the date and time of the server to the network. ○ The type of network connection available: static IP address or DHCP. ○ The host name and domain name assigned to the device, if any. For example, searchengine.mydomain.com. ○ Passwords for: ○ System User "root". This is the root password for the Red Hat Linux operating system. The root user is also known as the superuser. ○ SAP User "sap". This is the user login for managing SAP software. Use this account to perform all installation, upgrade, and setup tasks. ○ SAP ASE system administrator"sa". This is the SAP ASE system administrator account. It has full privileges to the SAP ASE server and databases. ○ SAP Control Center administrator "sccadmin". SAP Control Center provides a single, comprehensive, Web-administration console for real-time performance, status, and availability monitoring of SAP ASE. ® For hardware technical support, contact Fujitsu product support. For SAP ASE software support, contact SAP product support. 4 PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. Quick Start Guide Preparing for Deployment 3 Setting up the Fujitsu Power Appliance for SAP ASE Connect the appropriate cables, keyboard, mouse and monitor to the Fujitsu Power Appliance for SAP ASE. When you start the Fujitsu Power Appliance for SAP ASE, the setup script starts automatically. Procedure 1. Connect the network cable, keyboard, mouse, and display to the server. 2. Connect the two AC power cables (provided) to the server. 3. Turn on power to the display monitor, then turn on power to the server. 4. Once the setup script starts, select the license region code. This is the location where the server resides. 5. Read and agree to the SAP software license agreement. 6. Enter the fully qualified host name. This is the Fujitsu Power Appliance for SAP ASE appliance name and domain name. For example, searchengine.mydomain.com. 7. Choose your network connection: DHCP or Static. If you select Static for your network, you must also specify the following: ○ Enter Host IP Address/Netmask is the IP address of the SAP ASE host and the netmask for the subnet. For example, 156.79.253.23/255.255.255.192. ○ Enter Gateway IP Address is the IP address of the network gateway through which the Fujitsu Power Appliance for SAP ASE reaches the IP address of the network gateway. ○ Enter DNS Server IP Address is the IP address of your Domain Name System (DNS) server. 8. Specify and confirm the timezone for your region. 9. Enter the NTP IP Address. This is the Network Time Protocol server IP address (not the server name). If your site does not use an NTP server, press Enter. 10. Verify your configuration settings and enter C to continue. 11. Enter Y to restart the server. The Fujitsu Power Appliance for SAP ASE applies your network settings and continues with SAP ASE configuration. 12. Enter the password for System User "root". This is the root password for the Red Hat Linux operating system. The root user is also known as the superuser. 13. Enter the password for the SAP User "sap". This is the user login used for managing SAP software. Use this account to perform all installation, upgrade, and setup tasks. 14. Enter the password for the SAP ASE system administrator"sa". This is the SAP ASE system administrator account. It has full privileges to the SAP ASE server and databases. 15. Enter the password for the SAP Control Center administrator "sccadmin". This is the login password to access SAP Control Center. SAP Control Center provides a single, comprehensive, Webadministration console for real-time performance, status, and availability monitoring of SAP ASE. Quick Start Guide Setting up the Fujitsu Power Appliance for SAP ASE PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. 5 Next Steps Once you have successfully set up the Fujitsu Power Appliance for SAP ASE, go to the SAP Control Center Web address that appears at the end of the setup process. Log in to SAP Control Center to add and register your SAP ASE server. 3.1 Sample DHCP Configuration Setup A sample setup output for DHCP network configurations. SAP ASE Software End-user License Agreement Select License Region code =============================================================================== 1) Argentina 2) Australia 3) Belgium(English) 4) Brazil 5) Canada 6) Denmark 7) France(English) 8) France(French) 9) Germany(English) 10) Hong Kong 11) India 12) Italy(English) 13) Italy(Italy) 14) Japan 15) Korea 16) Malaysia 17) Mexico 18) Netherlands Please enter the number of the location you are installing. (1-32) (DEFAULT:1): 19) New Zealand 20) Norway 21) People's Republic of China(PRC) 22) Singapore 23) Spain(English) 24) Spain(Spanish) 25) Sweden 26) Switzerland(English) 27) Taiwan 28) United Kingdom 29) United States of America 30) Americas (Mid/So.) and Asia Pacific - General 31) Any Other Locations 32) Europe,Middle East, and Africa - General Select# or Enter redisplay list: 29 LIC:[US=United States of America] Region Selected: [United States of America] SOFTWARE TRIAL LICENSE AGREEMENT UNITED STATES 20071115 6 PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. Quick Start Guide Setting up the Fujitsu Power Appliance for SAP ASE IMPORTANT NOTICE: Read this License Agreement ("Agreement") carefully before using the enclosed Program. You may Use the Program acquired in the United States only, and only in accordance with the following terms and conditions. IF YOU DO NOT AGREE TO BE BOUND BY THESE TERMS, YOU MAY NOT USE THE PROGRAM. By downloading, installing, or using the Program in any way, You acknowledge that You have read, understand and agree to the terms of this Agreement. CLICK THE "I AGREE" BUTTON IF YOU WISH TO DOWNLOAD OR INSTALL THE PROGRAM. Press ENTER to read the text [Type 'back' and press ENTER to skip the text]: back I agree to the terms of the SAP license for the install location specified. (Y/N): y Enter Fully Qualified Hostname for ASE sever (ex: aseserver.mydomain.com) > asetest.mydomain.com Select 1- DHCP 2- Static > 1 Configure TimeZone 1) Africa 2) America 4) Arctic 5) Asia 7) Australia 8) Brazil 10) Chile 11) Etc 13) Indian 14) Mexico 16) Pacific 17) posix 19) US 20) Select# or Enter redisplay list: 2 1) Adak 4) Antigua 7) Asuncion 10) Bahia 13) Belem 16) Boa_Vista 19) Buenos_Aires 22) Cancun 25) Cayenne 28) Chihuahua 31) Costa_Rica 34) Curacao 37) Dawson_Creek 40) Dominica 43) El_Salvador 46) Fortaleza 49) Goose_Bay 52) Guadeloupe 55) Guyana 58) Hermosillo [Select#|Prev] or Enter 2) Anchorage 5) Araguaina 8) Atikokan 11) Bahia_Banderas 14) Belize 17) Bogota 20) Cambridge_Bay 23) Caracas 26) Cayman 29) Coral_Harbour 32) Creston 35) Danmarkshavn 38) Denver 41) Edmonton 44) Ensenada 47) Glace_Bay 50) Grand_Turk 53) Guatemala 56) Halifax 59) Indianapolis for next page: 69 3) Antarctica 6) Atlantic 9) Canada 12) Europe 15) Mideast 18) right 21) 3) Anguilla 6) Aruba 9) Atka 12) Barbados 15) Blanc-Sablon 18) Boise 21) Campo_Grande 24) Catamarca 27) Chicago 30) Cordoba 33) Cuiaba 36) Dawson 39) Detroit 42) Eirunepe 45) Fort_Wayne 48) Godthab 51) Grenada 54) Guayaquil 57) Havana 60) Inuvik Confirm TIMEZONE: America/Los_Angeles [Y|N]: y Enter NTP server IP Address or Enter for none: > 156.79.253.62 ************************************************* Please verify the following configuration settings Hostname: [asetest.mydomain.com] IP/Netmask/Gateway/DNS: DHCP TimeZone: [America/Los_Angeles] NTP: [156.79.253.62] Quick Start Guide Setting up the Fujitsu Power Appliance for SAP ASE PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. 7 Continue, Quit, Restart [C|Q|R]: c Shutting down network port eth0 Reconfiguring eth0 file /etc/sysconfig/network-scripts/ifcfg-eth0 Bringing up network port eth0 OK Determining IP information for eth0... done. Reconfiguring Hosts file /etc/hosts OK Reconfiguring Network file /etc/sysconfig/network OK Reconfiguring NTP file /etc/ntp.conf Restarting network services Shutting down interface eth0: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... done. [ OK ] Hostname asetest access OK NTP server 156.79.253.62 access OK Need to Reboot to make hostname active Reboot now? [Y/N]: y Start ASE Configuration Enter Password for System User "root": ******** Confirm Password for System User "root": ******** Enter Password for SAP User "sap": *** Confirm Password for SAP User "sap": *** Enter Password for SAP ASE system administrator "sa": ***** Confirm Password for SAP ASE system administrator "sa": ***** Enter Password for SAP Control Center administrator "sccadmin": ****** Confirm Password for SAP Control Center administrator "sccadmin": ****** Changing Password for user root OK Changing Password for user sap OK Calling ASE Setup Script Setup interfaces file... Backup /data/sap/interfaces to /data/sap/interfaces.old Create /data/sap/interfaces Setup server configuration file for small ASE Appliance... Backup /data/sap/ASE-15_0/SAP.cfg to /data/sap/ASE-15_0/SAP.old Create /data/sap/ASE-15_0/SAP.cfg Boot SAP ASE "SAP"... . Server booted. Change SAP ASE "sa" user password... Password changed. Boot SAP Backup server "SAP_BS"... Pinging asetest:5001... Success. SAP Backup server started. Change SAP Control Center "sccadmin" user password... Password changed. Boot SAP Control Center Pinging asetest:8283...... Success. SAP Control Center started. 8 PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. Quick Start Guide Setting up the Fujitsu Power Appliance for SAP ASE SAP ASE Appliance setup successful. The SAP ASE server "SAP", SAP Backupserver "SAP_BS", and SAP Control Center are successfully running. To manage and monitor SAP ASE, login to https://asetest:8283/scc with the SAP Control Center administrator (sccadmin) user name and password. Press Enter to return to Operating System 3.2 Sample Static IP Configuration Setup A sample setup output for static IP network configurations. SAP ASE Software End-user License Agreement Select License Region code =============================================================================== 1) Argentina 2) Australia 3) Belgium(English) 4) Brazil 5) Canada 6) Denmark 7) France(English) 8) France(French) 9) Germany(English) 10) Hong Kong 11) India 12) Italy(English) 13) Italy(Italy) 14) Japan 15) Korea 16) Malaysia 17) Mexico 18) Netherlands Please enter the number of the location you are installing. (1-32) (DEFAULT:1): 19) New Zealand 20) Norway 21) People's Republic of China(PRC) 22) Singapore 23) Spain(English) 24) Spain(Spanish) 25) Sweden 26) Switzerland(English) 27) Taiwan 28) United Kingdom 29) United States of America 30) Americas (Mid/So.) and Asia Pacific - General 31) Any Other Locations 32) Europe,Middle East, and Africa - General Select# or Enter redisplay list: 29 LIC:[US=United States of America] LIC:[US=United States of America][US][United States of America] Region Selected: [United States of America] SOFTWARE TRIAL LICENSE AGREEMENT UNITED STATES 20071115 Quick Start Guide Setting up the Fujitsu Power Appliance for SAP ASE PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. 9 IMPORTANT NOTICE: Read this License Agreement ("Agreement") carefully before using the enclosed Program. You may Use the Program acquired in the United States only, and only in accordance with the following terms and conditions. IF YOU DO NOT AGREE TO BE BOUND BY THESE TERMS, YOU MAY NOT USE THE PROGRAM. By downloading, installing, or using the Program in any way, You acknowledge that You have read, understand and agree to the terms of this Agreement. CLICK THE "I AGREE" BUTTON IF YOU WISH TO DOWNLOAD OR INSTALL THE PROGRAM. Press ENTER to read the text [Type 'back' and press ENTER to skip the text]: back I agree to the terms of the SAP license for the install location specified. (Y/N): y Enter Fully Qualified Hostname for ASE sever (ex: aseserver.mydomain.com) > asetest.mydomain.com Select 1- DHCP 2- Static > 2 Enter Host IP Address/Netmask (ex: 192.168.0.3/255.255.0.0) > 156.79.253.23/255.255.255.192 Enter Gateway IP Address: > 156.79.253.1 Enter DNS server IP Address: > 156.79.253.62 Configure TimeZone 1) Africa 2) America 4) Arctic 5) Asia 7) Australia 8) Brazil 10) Chile 11) Etc 13) Indian 14) Mexico 16) Pacific 17) posix 19) US 20) Select# or Enter redisplay list: 2 3) Antarctica 6) Atlantic 9) Canada 12) Europe 15) Mideast 18) right 21) 1) Adak 4) Antigua 7) Asuncion 10) Bahia 13) Belem 16) Boa_Vista 19) Buenos_Aires 22) Cancun 25) Cayenne 28) Chihuahua 31) Costa_Rica 34) Curacao 37) Dawson_Creek 40) Dominica 43) El_Salvador 46) Fortaleza 49) Goose_Bay 52) Guadeloupe 55) Guyana 58) Hermosillo [Select#|Prev] or Enter 2) Anchorage 5) Araguaina 8) Atikokan 11) Bahia_Banderas 14) Belize 17) Bogota 20) Cambridge_Bay 23) Caracas 26) Cayman 29) Coral_Harbour 32) Creston 35) Danmarkshavn 38) Denver 41) Edmonton 44) Ensenada 47) Glace_Bay 50) Grand_Turk 53) Guatemala 56) Halifax 59) Indianapolis for next page: 3) Anguilla 6) Aruba 9) Atka 12) Barbados 15) Blanc-Sablon 18) Boise 21) Campo_Grande 24) Catamarca 27) Chicago 30) Cordoba 33) Cuiaba 36) Dawson 39) Detroit 42) Eirunepe 45) Fort_Wayne 48) Godthab 51) Grenada 54) Guayaquil 57) Havana 60) Inuvik 61) 64) 67) 70) 62) 65) 68) 71) 63) 66) 69) 72) 10 Iqaluit Juneau La_Paz Louisville Jamaica Knox_IN Lima Lower_Princes PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. Jujuy Kralendijk Los_Angeles Maceio Quick Start Guide Setting up the Fujitsu Power Appliance for SAP ASE 73) Managua 76) Martinique 79) Mendoza 82) Metlakatla 85) Moncton 88) Montreal 91) New_York 94) Noronha 97) Pangnirtung 100) Port-au-Prince 103) Porto_Velho 106) Rankin_Inlet 109) Resolute 112) Santa_Isabel 115) Santo_Domingo 118) Shiprock [Select#|Prev] or Enter 74) Manaus 77) Matamoros 80) Menominee 83) Mexico_City 86) Monterrey 89) Montserrat 92) Nipigon 95) Ojinaga 98) Paramaribo 101) Port_of_Spain 104) Puerto_Rico 107) Recife 110) Rio_Branco 113) Santarem 116) Sao_Paulo 119) Sitka for next page: 69 75) Marigot 78) Mazatlan 81) Merida 84) Miquelon 87) Montevideo 90) Nassau 93) Nome 96) Panama 99) Phoenix 102) Porto_Acre 105) Rainy_River 108) Regina 111) Rosario 114) Santiago 117) Scoresbysund 120) St_Barthelemy Confirm TIMEZONE: America/Los_Angeles [Y|N]: y Enter NTP server IP Address or Enter for none: > 156.79.253.62 ************************************************* Please verify the following configuration settings Hostname: IP: NETMASK: Gatewway: DNS: TimeZone: NTP: [asetest.mydomain.com] [156.79.253.23] [255.255.255.192] [156.79.253.1] [156.79.253.62] [America/Los_Angeles] [156.79.253.62] Continue, Quit, Restart [C|Q|R]: c Shutting down network port eth0 Reconfiguring eth0 file /etc/sysconfig/network-scripts/ifcfg-eth0 Bringing up network port eth0 Reconfiguring Hosts file /etc/hosts OK Reconfiguring Network file /etc/sysconfig/network OK Restarting network services Shutting down interface eth0: [ OK Shutting down loopback interface: [ OK Bringing up loopback interface: [ OK Bringing up interface eth0: [ OK Reconfiguring NTP file /etc/ntp.conf OK Shutting down ntpd: [ OK Starting ntpd: [ OK Hostname asetest access Gateway 156.79.253.1 access DSN server 156.79.253.1 access NTP server 156.79.253.62 access OK OK ] ] ] ] ] ] OK OK OK Need to Reboot to make hostname active Reboot now? [Y/N]: y On the Next REBOOT: Start ASE Configuration Enter Password for System User "root": ******** Confirm Password for System User "root": ******** Enter Password for SAP User "sap": Quick Start Guide Setting up the Fujitsu Power Appliance for SAP ASE PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. 11 *** Confirm Password for SAP User "sap": *** Enter Password for SAP ASE system administrator "sa": ***** Confirm Password for SAP ASE system administrator "sa": ***** Enter Password for SAP Control Center administrator "sccadmin": ****** Confirm Password for SAP Control Center administrator "sccadmin": ****** Changing Password for user root OK Changing Password for user sap OK Calling ASE Setup Script Setup interfaces file... Backup /data/sap/interfaces to /data/sap/interfaces.old Create /data/sap/interfaces Setup server configuration file for small ASE Appliance... Backup /data/sap/ASE-15_0/SAP.cfg to /data/sap/ASE-15_0/SAP.old Create /data/sap/ASE-15_0/SAP.cfg Boot SAP ASE "SAP"... . Server booted. Change SAP ASE "sa" user password... Password changed. Boot SAP Backup server "SAP_BS"... Pinging asetest:5001... Success. SAP Backup server started. Change SAP Control Center "sccadmin" user password... Password changed. Boot SAP Control Center Pinging asetest:8283...... Success. SAP Control Center started. SAP ASE Appliance setup successful. The SAP ASE server "SAP", SAP Backup server "SAP_BS", and SAP Control Center are successfully running. To manage and monitor SAP ASE, login to https://asetest:8283/scc with the SAP Control Center administrator (sccadmin) user name and password. 12 PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. Quick Start Guide Setting up the Fujitsu Power Appliance for SAP ASE 4 Checking and Applying Available SAP ASE Support Packages Support packages may be available for the SAP ASE software shipped with the Fujitsu Power Appliance for SAP ASE. Verify your version number and check the SAP Software Download Center for available updates. Context The general steps for applying SAP ASE patches to the Fujitsu Power Appliance for SAP ASE are: Procedure 1. Log in to the SAP ASE server using "sa" user credentials and verify the database version installed. 2. Log in to the to the appliance (machine) with "sap" login credentials. 3. Download and extract the SAP ASE installer to a temporary directory. 4. Shut down SAP ASE, Backup Server, and SAP Control Center. 5. Run the SAP ASE installer. 4.1 Verify the SAP ASE Version Number Installed on the Server Check the database version and patch level already installed on the server before you install support packages. Context Log in to the server with isql using "sa" user credentials and enter the following: isql -Usa -SSAP Password: 1> select @@version 2> go The output displays the server name. In this example, the output shows that the SAP ASE software version number is 15.7 and the support package (SP) is SP131: (1 row affected) 1> Adaptive Server Enterprise/15.7/EBF 21708 SMP SP131 /P/x86_64/Enterprise Linux/ ase157sp13x/3546/64-bit/FBO/Fri Nov 8 05:39:38 2013 Quick Start Guide Checking and Applying Available SAP ASE Support Packages PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. 13 Make a note of the current version for later comparison. 4.2 Downloading Support Packages From the SAP Software Download Center Check SAP Software Download Center for available support packages and download the package, if necessary. Procedure 1. Go to https://support.sap.com/swdc 2. Search for your product. and click Support Packages & Patches. 3. Select the server software for your version and then select the file associated with your operating system. Refer to the version number that you noted previously to compare. Choose any newer support package. SAP recommends that you install the latest. Note Some versions may not be bug-fix compatible with your software version. Click the Info link associated with the version to obtain and verify compatibility. 4. Use GNU Tar to decompress the SAP ASE installer to a temporary directory. 4.3 Shutting Down the Server Before you apply SAP ASE support packages, shut down SAP ASE, Backup Server, and SAP Control Center. Context To shut down SAP ASE and Backup Servers, log in to the to the appliance (machine) with "sap" login credentials. The environment variables are pre-setup in "sap" user. Once you are logged in, enter: [sap@appliance ase]$ isql -Usa -SSAP Password: 1> shutdown SYB_BACKUP 2> go Backup Server: 3.48.1.1: The Backup Server will go down immediately. Terminating sessions. 1> shutdown 14 PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. Quick Start Guide Checking and Applying Available SAP ASE Support Packages 2> go Server SHUTDOWN by request. ASE is terminating this process. CT-LIBRARY error: ct_results(): network packet layer: internal net library error: Net-Library operation terminated due to disconnect [sap@appliance ase] To shut down SAP Control Center, enter: [sap@appliance ase]$ $SYBASE/SCC-3_2/bin/scc.sh –stop [sap@appliance ase] 4.4 Installing SAP ASE Support Packages Run the SAP ASE installer once you download the support package file and save it to a temporary directory. Context To install the support package in GUI mode: Procedure 1. Log in to the to the appliance (machine) with "sap" login credentials to run the installer. 2. Navigate to the directory where you extracted the support package and start the installer: ./setup.bin 3. Follow the onscreen instructions and specify /sap/ase for the destination directory. 4. Continue to follow the onscreen instructions and accept the defaults. 5. Select Yes when asked if you want to update the product and click Next. 6. Select Update Adaptive Server and select the SAP ASE server you want the support package applied to. 7. Enter and confirm the “sa” user password for the selected SAP ASE server and click Next. After the installer completes, the support package is applied and SAP ASE restarts. Manually restart Backup Server and SAP Control Center. Alternatively, you can install the SAP ASE support package in an interactive text mode by specifying the -i console argument to the installer launcher. For example: setup.bin -i console The flow of the installation is identical to a GUI installation, except output is written to a terminal window and responses are entered using the keyboard. Quick Start Guide Checking and Applying Available SAP ASE Support Packages PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. 15 4.4.1 Manually Starting Backup Server and SAP Control Center After the installer completes, the support package is applied and SAP ASE restarts, however you will need to manually restart Backup Server and SAP Control Center. Context To start Backup Server, enter: $ cd $SYBASE $ ./ASE-15_0/install/startserver -f $SYBASE/ASE-15_0/install/RUN_SAP_BS To start SAP Control Center, enter: $ cd $SYBASE $ ./SCC-3_2/bin/scc.sh --start >& SCC-3_2/log/scc-service.out & 16 PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. Quick Start Guide Checking and Applying Available SAP ASE Support Packages 5 Managing and Monitoring SAP ASE After you perform initial Fujitsu Power Appliance for SAP ASE setup, use SAP Control Center to manage and monitor your server. Procedure 1. Install Adobe Flash Player 10.1 or later in the Web browser you will use to connect to SAP Control Center. Flash Player is a free plug-in. You can download the latest version from http://get.adobe.com/flashplayer/ . See the SAP Control Center Installation Guide at http://infocenter.sybase.com 2. . To connect to SAP Control Center, direct your browser to https://:8283/scc. If you see an error about the security certificate, add SAP Control Center to the Internet Explorer trusted sites zone, or add the security exception in Firefox. 3. Log in using the sccadmin user name and password. This is the password you specified during initial setup. Note If you cannot log in to SAP Control Center, right-click in the SAP Control Center login screen and select Settings. From the Local Storage tab, adjust the slider menu bar to more than 100KB. Next Steps When you first log in to SAP Control Center, you must add and register the SAP ASE server. Refer to the SAP Control Center online help. To open the help system, click ? in the upper-right corner of the screen, or select Help Online Documentation. Quick Start Guide Managing and Monitoring SAP ASE PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. 17 Important Disclaimers and Legal Information Coding Samples Any software coding and/or code lines / strings ("Code") included in this documentation are only examples and are not intended to be used in a productive system environment. The Code is only intended to better explain and visualize the syntax and phrasing rules of certain coding. SAP does not warrant the correctness and completeness of the Code given herein, and SAP shall not be liable for errors or damages caused by the usage of the Code, unless damages were caused by SAP intentionally or by SAP's gross negligence. Accessibility The information contained in the SAP documentation represents SAP's current view of accessibility criteria as of the date of publication; it is in no way intended to be a binding guideline on how to ensure accessibility of software products. SAP in particular disclaims any liability in relation to this document. This disclaimer, however, does not apply in cases of wilful misconduct or gross negligence of SAP. Furthermore, this document does not result in any direct or indirect contractual obligations of SAP. Gender-Neutral Language As far as possible, SAP documentation is gender neutral. Depending on the context, the reader is addressed directly with "you", or a gender-neutral noun (such as "sales person" or "working days") is used. If when referring to members of both sexes, however, the third-person singular cannot be avoided or a gender-neutral noun does not exist, SAP reserves the right to use the masculine form of the noun and pronoun. This is to ensure that the documentation remains comprehensible. Internet Hyperlinks The SAP documentation may contain hyperlinks to the Internet. These hyperlinks are intended to serve as a hint about where to find related information. SAP does not warrant the availability and correctness of this related information or the ability of this information to serve a particular purpose. SAP shall not be liable for any damages caused by the use of related information unless damages have been caused by SAP's gross negligence or willful misconduct. All links are categorized for transparency (see: http://help.sap.com/disclaimer). 18 PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. Quick Start Guide Important Disclaimers and Legal Information Quick Start Guide Important Disclaimers and Legal Information PUBLIC © 2014 SAP SE or an SAP affiliate company. All rights reserved. 19 www.sap.com/contactsap © 2014 SAP SE or an SAP affiliate company. All rights reserved. No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP SE or an SAP affiliate company. The information contained herein may be changed without prior notice. Some software products marketed by SAP SE and its distributors contain proprietary software components of other software vendors. National product specifications may vary. These materials are provided by SAP SE or an SAP affiliate company for informational purposes only, without representation or warranty of any kind, and SAP or its affiliated companies shall not be liable for errors or omissions with respect to the materials. The only warranties for SAP or SAP affiliate company products and services are those that are set forth in the express warranty statements accompanying such products and services, if any. Nothing herein should be construed as constituting an additional warranty. SAP and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP SE (or an SAP affiliate company) in Germany and other countries. All other product and service names mentioned are the trademarks of their respective companies. Please see http://www.sap.com/corporate-en/legal/copyright/ index.epx for additional trademark information and notices.