Transcript
QUICK START GUIDE
Attach the TV to the Stand
Step
Connect video devices
Step
1
2
Step
3
The following instructions cover assembling, connecting, and setting up your new TV. Make sure you have the accessories listed below.
Included in this box Remote Control
BN68-05029A-00
Insert the batteries into the remote control
Welcome to your new Smart TV!
Cable manager
Power on and start the initial setup
Step
Stand Parts and Cables
Stand Mount
Power Cord
x4
4
Remote Control
IR extender
Wall mount adapter (46 inch and above) 46 - 50 inches models: 2 pieces (BN96-18153B) 55 inches and above models: 4 pieces (BN96-18153A)
Warning: Screens can be damaged from direct pressure when handled incorrectly. We recommend lifting the TV by the edges, as shown.
Batteries (AAA x 2)
Also included: Cleaning Cloth, User Manual
Step 1
Attach the TV to the Stand
Lay the TV on a soft surface, screen side down. Use the packing material to protect the screen.
1
4
Insert 4 screws and secure the stand to the mount. x4 (M4 X L12) 32” ~ 55” x4 (M4 X L10) 60” ~ 65”
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV (such as the box).
5
Holding the stand parallel to the screen, slide the stand into the notches on the back of the TV.
Put a base and screws off to assemble the stand out of the box.
2
Screws 32 inch models: 7EA Base
3
Screws
40 inch and above models: 8EA
Fit the stand and mount together, making sure the notch on the mount aligns with the stand.
1
6
2
3
Insert 4 screws and secure the stand to the TV. x3 (M4 X L12) 32” x4 (M4 X L12) 40” ~ 55” x4 (M4 X L10) 60” ~ 65”
UF6300_BN68-05029A_ENG-US.indd 2
2013-02-01 �� 6:50:50
Step 2
Connect video devices
We suggest using HDMI connections whenever possible for the best picture quality. The displayed image may differ depending on the model. USB Connections
Power Input
You can connect USB storage devices to the USB jacks and enjoy personal photos, videos, and music.
USB (5V 0.5A)
Wired Ethernet USB (HDD 5V 1A)
Best Connection : HDMI
HDMI Cable
USB (TV CAMERA)
We suggest using HDMI whenever possible.
COMPONENT / AV IN
HDMI IN 4 (DVI) LAN
HDMI Port
HDMI IN 2 (ARC)
Use the other ports for Blu-ray players, game consoles, and other devices.
VIDEO
HDMI 1 is the default port for a cable or satellite set-top box.
HDMI IN 3
IR OUT
DIGITAL AUDIO OUT (OPTICAL)
HDMI IN 1 (STB) AUDIO OUT
EX-LINK AUDIO
ANT IN AIR/CABLE
Good Connection : Component and AV Match the colors on your device's cables to the colors on the jacks. Connect the yellow composite video out connector from an AV device to the green AV IN jack.
Connect the IR extender to the IR Out port to control external devices connected to the TV using the Smart Touch Control. For more detailed information, refer to the "Universal Remote Control Setup" section on the User manual.
AV also accepts component video connections (red/green/blue).
Connect the cable from the antenna or cable TV outlet.
Step 3
You can connect home theater systems to the OPTICAL or AUDIO OUT ports.
+
The AUDIO OUT port can connect to a speaker.
Insert the batteries into the remote control
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are shown below. Cable Plugs
Ports / Jacks
HDMI 1
2
USB
3
Optical
Step 4
Power on and start the initial setup
Information required:
Warning
Do not plug cables in upside down. Be sure to check the orientation of the plug before plugging it in.
Troubleshooting The stand is wobbly or crooked
• Wi-Fi network password (if you use one) • Zip code • Cable or satellite provider info
Make sure the arrows on the stand are properly aligned.
The TV won’t turn on
The TV must be connected to the Internet to use the Smart Features. If you have a wireless network, we recommend that you confirm that your network router is switched on and working before you start the initial setup. If you have a wired network, we recommend that you connect the TV to the network with a CAT 7 cable before you begin.
My remote, gesture, or voice controls don't work The TV ships with protective stickers covering some of the sensors. Make sure all of them have been removed.
I have extra parts
Power on to start the initial setup. Connect to your network (wired or wireless)
Make sure all cables are fully inserted, and that the remote has batteries installed.
The TV includes some optional parts to help with wall mounting and cable routing. Search for channels from your TV service provider
If you experience issues, please do not take the TV back to the store. In the United States of America, call us at 1-800-SAMSUNG (1-800-726-7864) or visit us at www. samsung.com/spsn for support and warranty service.
or After you have finished the initial setup, you can configure the universal remote control settings. These settings let the Smart Touch remote control external devices connected to the TV, such as a set-top box or Blu-ray player.
For other countries, refer to "Contact SAMSUNG WORLDWIDE" in the user guide. \
Congratulations on your new Smart TV!
UF6300_BN68-05029A_ENG-US.indd 3
2013-02-01 �� 6:50:57
