Preview only show first 10 pages with watermark. For full document please download

Quick Start Guide Wireless Tv Speaker Item No. 204094

   EMBED

Share

Transcript

Operation 1. Turn on your TV. Wireless TV Speaker Item No. 204094 QUICK START GUIDE Connection 1. C  onnect the Wireless TV Speaker Transmitter Base to your TV audio output as shown below. (If your TV does not have audio output jacks, you may also connect it through the headphones jack.) 2. C  onnect the power cable to the Transmitter Base and plug it into an AC outlet. 2. Turn the On/Off/ Volume knob on the Receiver and adjust the volume. 3. Select the Tone to the setting that gives you the best voice clarity. Recharging 1. Place the Receiver on the Transmitter Base for recharging when the Lo Battery/ Charging Indicator flashes, or any time the receiver is not in use. 2. Charging is complete when the Charging Indicator stops flashing and stays lit. Note: The battery life is approximately 8 hours (at 50% volume). Need Help? Call Sharper Image Customer Service at 1 (877) 210-3449. Charging Important! You must charge this device fully prior to first use. Place the Wireless Receiver on the Transmitter Base to charge for at least 6 hours or until the Lo Battery/Charging Indicator stops flashing and stays lit. Fall 2015