Preview only show first 10 pages with watermark. For full document please download

Quick Start Guide - Wl2110kit

   EMBED

Share

Transcript

www.lorextechnology.com WL2110KIT: Installation Instructions Step 1 of 2: Set up the antenna and wireless receiver 1. Connect the extension cable (included with the antenna) to the SMA connector on the wireless receiver as shown below. SMA connector Extension cable 2. Connect the other end of the extension cable to the antenna. 3. Connect the power adapter to the wireless receiver’s DC port. Connect the wireless receiver to a DVR/monitor. Power connector Final Result Extension cable Antenna Wireless Receiver DVR / Monitor NOTE: For antenna mounting instructions, refer to the antenna installation guide. Step 2 of 2: Pair the camera and receiver To pair the camera to the receiver: 1. Power on the camera and receiver. 2. On the receiver, press and hold the Pairing button for 5 seconds to activate the pairing function. • The on-screen displays informs you that you have 30 seconds to press the Pair button on the camera. Pairing button 3. Press and hold the Pair button underneath the antenna on the back of the camera. • You must press the Pair button on the camera within 30 seconds of pressing the Pair button on the Wireless Receiver. If pairing is successful, live video from the camera will immediately appear on the monitor. Pair button Copyright © 2011 Lorex Technology 2 WL2110KIT_QSG_EN_R1