Preview only show first 10 pages with watermark. For full document please download

Quickguide Clubsport Formula / Formula Carbon

   EMBED

Share

Transcript

TUNING OPTIONS CENTER CALIBRATION To enter Tuning Menu, press Tuning button. To navigate inside the menu, use the right FunkySwitch. Press it up or down to access 5 setups. Press FunkySwitch right or left to go through the options and turn the FunkySwitch to change option values. If a center calibration is needed (e. g. after firmware update of ClubSport Wheel Base) when using the steering wheel you need to enter the tuning button as shown on the graphic. When tuning menu is active then press the analogue Stick and the FunkySwitch at the same time to calibrate the wheel center. SHIFTER CALIBRATION Tuning Button FunkySwitch To enter shifter calibration mode, simultaneously press the Tuning Menu Button and the button highlighted below. Tuning Button QuickGuide Fanatec® is a registered trademark of Endor AG Designed and developed by Endor AG in Germany www.fanatec.com ATTACHING THE RIM - Remove storage pin. TAKING THE RIM OFF PS3 MODE To enter PlayStation 3 Mode, simulatneously press and hold the two buttons, highlighted below, for one second. - Compress and hold the Quick Release mechanism. L2 L3 R2 R3 - Align ClubSport Wheel Base axle, to correct position. - Slide it off the ClubSport Wheel Base axle. L1 R1 L4 D-Pad Select - Compress and hold the Quick Release mechanism. - Compress and hold the Quick Release mechanism. Start PC / PS4 MODE PlayStation 4 needs no special mode. The wheel has to be/stay in PC mode. - Slide it on the ClubSport Wheel Base axle. - Insert the storage pin. 7 R2 12 L3 1 4 8 L2 3 11 R3 2 Tuning Button Joy Joy + 26 + GSB 2* - Release the Quick Release mechanism. - Release the Quick Release mechanism. 6 L1 9 Touch Pad Button * Game Specific Button GSB 1* 22 D-Pad + 25 R1 Options 5 10