Transcript
Operator's Guide
The purpose of this guide is to provide the basic operation for this equipment. For more detailed information, see the Operator's Manual.
FMD-3200/FMD-3200-BB/FMD-3300
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.
ECDIS English Controls
The system can be operated with the controls or the trackball module. The procedures in this operator’s guide use the trackball module. Alert status LED The color and state of the LED change according to alert status. - Green, lighting: Normal operation status; no alerts generated. - Red, flashing: Alert generated (not acknowledged). - Red, lighting: Alert generated and acknowledged.
BRILL knob Rotate: Adjust brilliance of FURUNO monitor. Push: Select display palette.
A/C RAIN, A/C SEA knob No use.
GAIN knob Adjust the gain of the radar picture.
VRM rotary encoder Adjust active VRM. VRM 1: Activate, deactivate VRM1. VRM 2: Activate, deactivate VRM2.
POWER switch Turn the system on/off. (This control does not switch the monitor on/off.) USB port Connect USB flash memory.
EBL rotary encoder Adjust active EBL. EBL 1: Activate, deactivate EBL1. EBL 2: Activate, deactivate EBL2.
Trackball module Operates like a PC mouse. VIEW/HIDE key Show/hide the Instant Access Bar and Route Information box.
ALARM ACK key Alert acknowledgement for alerts generated by chart, navigation, etc.
ACQ key Activate cursor-selected sleeping AIS target.
Instant Access knob Access functions on the Instant Access Bar. - Rotate: Select item. - Push: Confirm selection. ESC key Go back one step in the current sequence.
TARGET DATA key Display the detailed target data for selected TT, AIS target. Keyboard A keyboard for entering alphanumeric data.
MFD key Toggle ECDIS and Conning modes.
UNDO key RANGE key Undo the last operation, when Select the chart creating a route and user chart. scale.
TARGET CANCEL key Sleep cursor-selected AIS target.
Display Layout Status Bar (See page 3.)
Instant Access Bar
(See page 4.)
Chart scale, presentation mode box
Cursor position box
Sensor information box
Upper section Own ship functions box
Electronic chart area
Route information box
Overlay/NAV Tools box
(See page 11.)
Lower section
Alert box EBL1 box, EBL2 box
Permanent warnings box
2
VRM1 box, VRM2 box
Status Bar Status Bar
OTHERS: Play back log. PLAN: Select the Voyage planning mode. CHARTS: Select the Chart maintenance mode. NAVI: Select the Voyage navigation mode. Operating mode: Select the ECDIS mode, ECDIS or Conning. How to open a drop-down list
Chart format: Select chart format, vector or raster.
Click
User settings: - Show the Settings menu. - Manage profiles.
Spinner: Rotates clockwise if the system is working properly. Time: Time (local or UTC)
STD DISP: Restore IMO standard display.
Drop-down list
CHART ONLY: Show only the chart, when left button is pressed and held down.
3
Display the operator's manual, ECDIS program no. and system information. Chart database: Select the pre-defined presentations of ENC content: IMO BASE, IMO STD or IMO ALL.
Date: Display the date; select the time to use, local or UTC.
Instant Access Bar Lower section
Upper section (by operating mode) Voyage navigation mode
MSG: Open the AIS/NAVTEX message menu window to process AIS/NAVTEX messages.
Select: Open route selection menu window to select the route to follow. Unselect: Stop following a route. Move to Plan: Transfer route to Voyage planning mode to edit route. License: Show chart viewing date setup window. Route INFO: Find details about route.
Manual Update: Open the manual update menu window to insert chart update symbols manually.
Chart maintenance mode
Auto Load: Start automatic installation of the chart data (CD or DVD ROM). Manage Charts: Manage chart cells (grouping, deleting, etc.). Cell Status: Show the chart catalog to get info about charts installed in the system. License: Show chart viewing date setup window. Public Key: Open public key management window.
SET: Show setting windows for chart, symbol, user chart. TWO DISP: Split screen int two, horizontally or vertically. AIO: Display Admiralty Information Overlay. Show software keyboard.
Chart Legend: Find data about current chart. Viewing Dates: Set “display date” and “approved until” dates. Chart 1: Show overview of ECDIS chart symbols.
Record buttons: Record user/position events to the event log; access various logs.
Voyage planning mode Report: See route reports on waypoints and passage plan as well as user chart reports.
Mini conning: Show and hide the mini conning display, available in the Voyage navigation a Planning navigation modes.
Select a color palette. Route: Create a route (see page 5). User Chart: Creat a user chart (see page 7). Guide Box: A guide box instantly tells the operators the range and bearing between the last waypoint and the cursor position as you drag the cursor. Manage Data: Delete routes and user charts.
Adjust display brilliance. MOB: Mark man overboard position.
Take a screenshot.
Undo past action.
4
Routes How to create a route
PLAN
Plan -ning
Route
New
Click
WPT5 161.4° 353.3NM Waypoint WPT6 WPT1
WPT1 201.5° 2137.2NM
Continue adding positions. Right click after inserting final waypoint; select [Finish].
WPT2 106.9° 1748.5NM
Left-click a position to mark a waypoint.
5
WPT4 309.0° 971.4NM
WPT3 25.8° 1470.2NM
Save as
Click
Enter name
OK
Click
Routes (con’t.) How to select a route to navigate Select Route
Select Route Date
Name Route32 AAAAAA Route67
Name Route32 RouteAAAAAA Route67
12 Aug 2011 10 Apr 2011 19 Sep 2011
Date 12 Aug 2011 10 Apr 2011 19 Sep 2011
Selected.
Select a route. Select [Route].
Total WPTs : 42
Total DIST : 7736 NM
To stop navigating a route:
NAVI
Route
Unselect
Start WPT : 34°37.058’ N Final WPT : 60°10.032’ N 135°13.260’ W 24°56.030’ E
Cancel
Cancel
OK
OK
How to view route waypoint information
Route
Click [Waypoints].
Route INFO
How to delete a route
PLAN
Manage Data
Route
Check route(s) to delete.
Delete
Click 6
User Charts How to create a user chart
User Chart
Plan -ning
PLAN
New
Right click to open options
How to draw a line Tidal:
- Current - Predicted
Area
Line: - Coast - Route - NAV - Depth Tidal: - NMT - NLT
Label
(1) Click
(4) Right-click; select [Finish]. Drag cursor; double-click.
Click object to draw.
Enter name
Save as
Click
OK
Click
7
How to draw an area (1) Click
(3) Click
(2) Click
Circle
How to draw a circle
(2) Click
(3) Right-click; select [Finish].
User Charts(con’t) How to select objects to display in user chart
DISP
How to link a user chart to a route
Symbol DISP
SET
PLAN
Plan -ning
Route
Selected. Click [Select.]
Select [Mariner] tab.
RouteAAAAAA
Click [User Chart] tab.
Click Check an item.
Select a user chart.
Click
Click
How to delete objects from a user chart
Point on a line
Point, symbol, tidal or circle
Edit Delete
Edit DeletePoint
Select [DeletePoint].
Select [Delete]. Right- click
Right- click the point to delete.
How to delete user charts
PLAN
Manage Data
User Chart
Delete
Check chart(s) to delete.
Click 8
Chart Operations How to control visibility of chart objects
Basic Setting Control basic chart settings
DISP
SET
Chart DISP Control chart objects
Symbol DISP Control navigational features
9
Chart Operations How to set Display date and Approved until dates
How to set safety contours and chart alerts
DISP
Chart INFO
Chart Alert
SET
Click to put checkmark; red ( ): Highlight+Warning yellow ( ): Caution
Viewing Dates
Approve All
Set safety depths here.
How to find chart object information (ENC chart)
Ship off center Object INFO Manual Update
OK
Select [Object INFO.]
Select an object.
Right-click
How to manually insert a “new” chart object
NAVI
Manual Updates
Select object from Drawing type.
Add
Select [Planning].
Commit
Click object to add. 10
TT/AIS Operations How to find target info Put the cursor on the target and push the left button to show target data. Title bar
Title bar MMSI
TT No. Bearing
TT symbols (main)
Range
Symbol (Color)
Course over ground Speed over ground
Past position (Green) marker
CPA TCPA Bow cross range Bow cross time
Name
**.** **.**
(Green)
Target under acquisition
Scroll buttons
Bearing Range Course over ground Speed over ground CPA TCPA Bow cross range Bow cross time
Heading Rate of turn
Symbol (Color) (Green) (Green)
Position
Acquired (Green) target
AIS symbols (main)
Navigation status
Name Past position marker Sleeping AIS target
Activated AIS (Green) target
How to set up TT and AIS on the TT/AIS page in Overlay/NAV Tools box Show, hide AIS display. Vector Set vector time.
Show, hide TT display.
Select vector reference.
(ex. TT)
Set CPA/TCPA alarm. Set conditions for automatic activation of AIS targets whose CPA is within CPA/TCPA setting.
Set lost target alarm.
(ex. AIS)
Select reference for past position display. Show, hide position display. 11
TT/AIS Operations (con’t)
Radar Overlay Activate, deactivate the radar overlay. Adjust the gain of the radar receiver. Put the cursor on the bar then roll the scrollwheel.
Filter AIS targets by target category.
Set the degree of transparency for the overlay.
Filter AIS targets by range and speed, length. Sleep all activated AIS targets.
Set the item to display when a chart object and a radar echo share the same position. Select the antenna to feed the overlay. Set conditions to activate an AIS target when its CPA is within the CPA alarm setting.
Radar echo
Set the conditions for the AIS lost target filter. Set the conditions for the TT lost target filter.
12
PUB. NO. OSE-44730-A (1204, DAMI) FMD-3200/3200-BB/3300
