Quick_reference_guide_openstage_15_sip

Transcript

Documentation HiPath 8000 OpenStage 15 Quick Reference Guide Communication for the open minded Siemens Enterprise Communications www.siemens.com/open Operating your phone Operating your phone Key field + Set situation-specific - volumes e. g. for ringtones or loudspeaker n Activate/deactivate the loudspeaker O Voicemail/call lists N Service menu j Keypad S Programmable function keys : Scroll forward = Confirm a function < Scroll back Keypad In cases where text input is possible, you can use the keypad to input text, punctuation and special characters. To do this, press the numerical keys repeatedly. Additional functions on the asterisk and hash keys: Key Function during text input Function when held down * Write special characters. Deactivate the ring tone # Switch between upper and lower case Activate the telephone lock. and number entry. Display 13:15 2222 13:15 2 Sat 27.07.07 Time and date HiPath 8000 Own phone number and menu icon A1 27.07.07 Time and date A new entry in the call lists Important operating procedures Important operating procedures ^ Lift the handset \ Replace the handset [ Conduct call j Enter the text or number f Selecting an entry Z Ringtone/call waiting tone Next operating step In idle mode Answering a call via the handset Z ^ Accepting a call in speakerphone mode Z n Rejecting a call Z f "Reject" = Deflecting a call Z f "Deflect" = j Destination number = Dialing from the caller list O f "Calls" = f "Missed", "Dialed", "Received" or "Forwarded" = f required entry = f "Dial" = Activating callback j Destination number = Redialing a number S Redial f "Dialed" on no reply or busy: f "Call back" = f required number = ^ Programming call forwarding f "Edit call forwarding" = S Call forwarding f "Destination" (e.g. under "All calls") = "Edit favorites" = f "Destination 1" = j Number = f "Options = Save & exit" = f "Save & exit" = f "Destination" (under required forwarding type e.g. "All calls") = f Select number = required forwarding type e.g. f "All calls" = f "On" = f "Options = Save & exit" = f "Save & exit" = Activating/deactivating call forwarding for all calls S Call forwarding / R Call forwarding 3 Important operating procedures During a call with station A Switching to speakerphone mode n Hold down \ (only for USA: n \) Consultation f "Consultation" = j Station number B = f "Disconnect & return" = [ Station A Accepting call waiting Z Call waiting tone f"Accept" = [ Station A Forwarding a call on call waiting Z Call waiting tone f "Deflect" = [ Station B f "Disconnect & return" = j Station B number = Start conference "Consultation" = j Station B number= f "Conference" = [ Station A and B Start conference with call waiting Z Call waiting tone f "Accept" = [ Station A and B [ Station B [ Station A [ Station B [ Station B f "Conference" = Transferring a call with station B without consultation f "Consultation" = j Destination number = \ Transferring a call after consultation f "Consultation" = j Station B number = 4 [ Station B \ Copyright © Siemens Enterprise Communications GmbH & Co. KG Hofmannstr. 51 80200 München Deutschland Siemens Enterprise Communications GmbH & Co. KG is a Trademark Licensee of Siemens AG Reference No: A31003-S2000-U137-1-7619 Communication for the open minded Siemens Enterprise Communications www.siemens.com/open The information provided in this document contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice. OpenScape, OpenStage and HiPath are registered trademarks of Siemens Enterprise Communications GmbH & Co. KG. All other company, brand, product and service names are trademarks or registered trademarks of their respective holders.