Transcript
QuickSpecs
Compaq Rack Accessories
F
MODELS Compaq Rack Accessories Compaq offers a wide variety of rack accessories that help you to configure Compaq Racks. For more information go to www.Compaq.com/racks or http://www.compaq.com/rackoptions. Compaq Flat Panel Monitor Rackmount Part Number:
TFT5010R 217248-001 (North America) 217248-291 (Japan) 217248-B31 (Int’l)
Note: A space-saving 15″ TFT flat panel monitor mounted in a retractable 2U drawer – saving 7U or more in the rack, allows customers to maximize the density of their rack with additional Compaq servers, storage, networking or power protection products. Monitor/Utility Shelf Part number:
303606-B21
Note: This 1U fixed shelf can be mounted at any height to place a monitor or another component within the rack. The monitor/utility shelf has a maximum weight capacity of 150 lbs (68 kg) and ships with bezels for both a 15″ and 17″ monitor. Compaq TFT5600 RKM Part Number:
221546-001 – 221546-031 – 221546-041 – 221546-051 – 221546-061 – 221546-071 – 221546-081 – 221546-091 – 221546-101 – 221546-111 – 221546-131 – 221546-181 – 221546-291 – 221546-B31 –
US UK GR FR ITL SP DEN NOR SWE/FIN SWI PORT BEL JPN2 Int’l
Note: The Compaq TFT5600 RKM provides a full 15″ digital display and hot keys keyboard in only 1U. Plus allows enough room to mount a Compaq switchbox behind it. Nine programmable hot keys run across the top of the keyboard with the programming wizard key in the far right corner. The hot keys are work with Compaq switchboxes allowing for rapid movement between rack mounted devices 1U Keyboard Drawer Part Number:
338056-B21
Note: This space-saving 1U drawer neatly holds, protects, and conceals an Internal Keyboard with Integrated Trackball. It provides the option to mount a Compaq switch box behind drawer to save additional 1U of rack space. It can be mounted at any height within Compaq Racks and is mounted on slides that allow you to pull the drawer in and out of the rack.
DA-10247
World Wide — Version 19 — February 1, 2002
1
QuickSpecs
Compaq Rack Accessories
F
MODELS
(continued)
Keyboard with Hot Keys and Trackball Part Number:
158649-001 – U.S. 158649-003 – UK 158649-004 – GR 158649-005 – FR 158649-006 - ITL 158649-007 – SP 158649-008 – DAN 158649-009 – NOR 158649-010 – SWE/FIN 158649-011 – SWI 158649-013 – PORT 158649-018 – BEL 158649-291 – JAP 158649-B36 – Int’l
Note: This keyboard with integrated trackball fits neatly inside the 1U Keyboard Drawer. The keyboard also has a programmable wizard key used to program up to seven keystrokes for each of the nine hot keys. These hot keys will allow users to quickly move between rack-mounted devices. Sliding Shelf Kit Part Number:
332564-B21
Note: This sliding ventilated shelf allows for some rack-mountable products to be mounted at any height within Compaq Racks. It mounts on slides that allow you to pull the shelf in and out of the rack for easy access, maintenance and upgrading. A cable management arm and a handle are included. The sliding shelf has a maximum weight capacity of 110 lbs (50 kg). Depth Adjustable Fixed Rail Kit Part Number:
332558-B21
Note: The kit contains two, 19″ to 31″, depth adjustable rails that mount Compaq rack-mountable servers, storage boxes, UPSs, and Compaq networking products in third-party racks. The Depth Adjustable Fixed Rail Kit also allows for most third-party, rack-mountable products to be mounted in Compaq Racks. The depth adjustable fixed rails have a maximum weight capacity of 300 lbs (136 kg). Blanking Panel Kit Part Number:
169940-001 – Beach Gray (7000 Series) – Contains one each of a 1U, 2U, 4U and 8U panel 169940-B21 – Opal (9000 Series) – Contains one each of a 1U, 2U, 4U and 8U panel 189453-B21 – Opal (9000 Series) – Contains 10 of the 1U panel 189453-B22 – Opal (9000 Series) – Contains 10 of the 2U panel 189453-B23 – Opal (9000 Series) – Contains 10 of the 3U panel 189453-B24 – Opal (9000 Series) – Contains 10 of the 4U panel 189453-B25 – Opal (9000 Series) – Contains 10 of the 5U panel 253214-B26 – Graphite (10000 Series) – Multi - Contains one each of a 1U, 2U, 4U and 8U panel 253214-B21 – Graphite (10000 Series) - Contains 10 of the 1U panel 253214-B22 – Graphite (10000 Series) - Contains 10 of the 2U panel 253214-B23 – Graphite (10000 Series) - Contains 10 of the 3U panel 253214-B24 – Graphite (10000 Series) - Contains 10 of the 4U panel 253214-B25 – Graphite (10000 Series) - Contains 10 of the 5U panel
Note: Blanking panels are sheet metal plates that are used to cover open spaces in the rack to facilitate proper airflow.
DA-10247
World Wide — Version 19 — February 1, 2002
2
QuickSpecs
Compaq Rack Accessories
F
MODELS
(continued)
Sidewall Panel Kits Part Number:
120670-B21 (Opal) (9142 Rack) 120671-B21 (Opal) (9136 Rack) 165652-001 (Beach Grey) (7142 Rack) 264099-B21 (Graphite) (42U 10000 Series Racks)
Note: The 22U racks ship with side panels installed standard. Sidewall Panel Kits are optional for all other height racks. Note: The side panels for the 10000 series rack are lockable. Rack Stabilizing Feet Part Number:
120673-B21 (Opal) (9000 Series Rack) 189907-001 (Beach Grey) (7000 Series Rack) 234493-B21 (800mm, Opal) (Rack 9842 only) 246107-B21 (600mm, Graphite) (10000 Series Rack)
Note: Stabilizing feet are required for stand-alone 42U and 36U racks (order one kit per 42U/36U Rack). Rack Coupling Kits Part Number:
120669-B21 (Opal) (9000 Series Rack) 165664-001 (Beach Grey) (7000 Series Rack) 248929-B21 (Carbon) (10000 Series Rack)
Note: Coupling kit connects multiple racks of the same height, minimizing usage of floor space. Offset Baying Kit Part Number:
248931-B21 (9000/1000 Series Rack)
Note: Offset Baying kit connects multiple racks of the same height, minimizing usage of floor space. Keyboard, Monitor, and Mouse Extension Cables Part Number:
169989-001
Note: Provide even greater flexibility in the location of a keyboard, monitor, and mouse through 6-foot (2-meter) cable extensions. Keyboard/Video/Mouse Switch Box Part Number:
120206-001 (1x2 Port U.S.) 120206-B31 (1x2 Port Int’l) 120206-291 (1x2 Port Japan) 400336-001 (1x4 Port U.S.) 400336-B31 (1x4 Port Int’l) 400336-291 (1x4 Port Japan) 400337-001 (1x8 Port U.S.) 400337-B31 (1x8 Port Int’l) 400337-291 (1x8 Port Japan) 400338-001 (2x8 Port U.S.) 400338-B31 (2x8 Port Int’l) 400338-291 (2x8 Port Japan) 400542-B21 (2x8 Port 48 V DC WW) 149361-B21 (KVM 9 PIN Adapter, 4 Pack)
Note: This 1U programmable scanning switch box is used to switch a single keyboard, monitor, and mouse among up to four (4-port) or eight (8-port) ProLiant servers. It routes all cables through the back of the rack cabinet and shows status information via on-screen display. For maximum convenience, switch boxes can be tiered to support up to 16 (4-port) or 64 (8-port) servers from a single console.
DA-10247
World Wide — Version 19 — February 1, 2002
3
QuickSpecs
Compaq Rack Accessories
F
MODELS
(continued)
Switch Box Connector Kit Part Number:
144007-001 (115 V) (North America) 144007-002 (230 V) (North America) 144007-B33 (100 to 240 V) (Int’l)
Note: This kit provides frontal access to a 2/4/8-port switch box for a keyboard, monitor, mouse, and power cord. CPU to Switch Box Cable Part Number:
110936-B24 (3 foot (1 meter)) 110936-B25 (7 foot (2 meter)) 110936-B21 (12 foot (4 meter)) 110936-B22 (20 foot (6 meter)) 110936-B23 (40 foot (12 meter)) 149363-B21 (20 foot plenum (6 meter)) 149364-B21 (40 foot plenum (12 meter))
Note: This cable allows flexibility in connecting servers to a switch box by providing 3 feet to 40 feet (1 to 12 meters) of cable. Compaq Networking Cable Management Kit Part Number:
292407-B21
Note: This kit provides an easy way to organize and route cables within Compaq Racks. Cable clips, cable rings, and 1U and 2U access panels are included. Compaq Networking Recessed Rail Management Kit Part Number:
292406-B21
Note: This kit provides mounting options that let you recess equipment to allow adequate room for cables that protrude from connection ports within a rack. Two sets of 4U, 7U, 15U, and 28U rail fractions are included. High Airflow Door Insert Part Number:
327281-B21 (Single Pack for Rack 7000 42U) 327281-B22 (6-pack for Rack 7000 42U) 157847-B21 (Single Pack for Rack 7000 22U)
Note: The High Airflow Door Insert is a mesh front door used to replace the lexan glass in the 7000 Series rack to promote greater cooling within the rack. Extension Kit Part Number:
120679-B21 9142 (42U 9000 Series Rack) 218216-B21 9136 (36U 9000 Series Rack) 154392-B21 7142 (42U 7000 Series Rack) – Contains two sleeves
Note: In the 9000 Series, the extension kit comes with one sleeve that mounts on the rear of the rack providing an additional 3.5″ of room in the rack. In the 7000 Series, this option kit comes with two sleeves that can be mounted either in the front or rear of the rack to provide additional room for equipment or cabling. Ballast Kit Part Number:
120672-B21
Note: For use with the 9000 Series rack, this option kit is designed to provide additional stability and support when used with the stabilizer kit. It is typically used when very heavy equipment is routinely installed, removed or accessed within the rack. Short Rear Door Part Number:
218217-B21 - 9142 (Opal) 218218-B21 - 9136 (Opal)
Note: These short rear doors can be used to replace the full-size doors that are shipped with the 9000 Series rack. These doors provide about seven inches of space at the bottom of the rack to allow large amounts of cabling to be routed out of the rack while still maintaining the security of a locking door.
DA-10247
World Wide — Version 19 — February 1, 2002
4
QuickSpecs
Compaq Rack Accessories
F
MODELS
(continued)
Split Rear Door Part Number:
254045-B21 – 9142 (Opal)
Note: This option is offered on the 600mm wide, 42U 9000 series rack to allow full access to rack mounted equipment without blocking rack aisles. In addition, a removable panel allows for cable routing out of the bottom of the rack. Rack Rail Adapter Kit (25″) Part Number:
120675-B21
Note: Adapters for mounting equipment at the 25″ depth level within the rack (traditional equipment depth is 29″ for ProLiant and 25″ for AlphaServers). Fan Kit Part Number:
120677-B21 (110 V) (Opal) 120678-B21 (220 V) (Opal) 257413-B21 (110 V) (Graphite) 257414-B21 (220 V) (Graphite)
Note: This kit mounts on the top of the 9000 and 10000 Series racks and pulls heated air from the back of the rack out through the top. Cable Management D Rings Part Number:
168233-B21
Note: This kit contains 10 “D” rings that can be used in addition to the rings that are shipped standard on the 9000 Series rack for cable management. Third Party Rail Kits Part Number:
226555-B21
Note: Kit includes hardware to mount one Sun Ultra 2, Ultra 5, or Ultra 10 server in the 9000 Series rack. 100kg Sliding Shelf (Graphite) Part Number:
234672-B21
Note: Provides a sliding shelf which will hold up to 100kg/220lbs. Grounding Kit Part Number:
120682-B21 (9000 series only) 260457-B21 (9000 or 10000 series racks)
Note: This product essentially reduces the electromagnetic emissions that may be given off by electronic components operating within the rack cabinet. The grounding kit ties all the conductive structural components of the Rack together with conductive cables and is designed be attached to a ground bonding point on the cables and is designed to be attached to a ground bonding point on the Rack’s AC Power Distribution Device.
DA-10247
World Wide — Version 19 — February 1, 2002
5
