Transcript
Quilting feet Here you will find a large number of quilting feet for our latest machines. 1/4" Piecing foot
Art. No. XC1944052 Best for quilt and patchwork piecing with 1/4" or 1/8" seam allowance. Its back and small needle opening are designed to give the right pressure to fabrics. Link to video Model number: F001N Quilting Foot – plastic
Art. No. XC1948052 For Darning, quilting or free motion. The foot raises and lowers with the needle to allow fabric to be moved between stitches and to hold fabric in place while stitches are created. Model number: F005N Link to video
Quilting guide
Art. No. XC2215052 Attaches to walking foot, acts as guide to set precise distances from one point to another. Use it to sew parallel rows at preset even intervals. This quilting guide may also be inserted in the hole on the back of the snap-on presser foot ankle. Compatible with all our home-use sewing machines Model number: F016N Clear View Foot (Vertical)
Art. No. XC1959002 For optimum visiblity while sewing. It is ideal for topstitching, decorative stitches, patchwork piecing, etc. Compatible with Prestige series BS, LS, PS, PX, VX, XL except 6000
series, XR series (5mm stitch width, vertical bobbin sewing machines) Model number F022N Clear-view Foot (Horizontal)
Art. No. XC1958052 For optimum visiblity while sewing. It is ideal for topstitching, decorative stitches, patchwork piecing, etc. (Snap-on foot) Compatible with Star series, Super Ace I to III and +e, PE-300S/PE400D, Super Galaxie series (Horizontal bobbin sewing machines) Model number: F023N Walking Foot 7mm (Horizontal)
Art. No. XC2214052 The walking foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machines's lower feed dogs to better control difficult fabrics as well as multiple layers of fabric. The walking foot is great for quilting, sewing when matching prints or plaids or fabric drift is an issue. Brother offers several Walking feet which differ in the size of the feed dog, shank height etc. Please check your manual or the machine listings on this web site to find the correct walking foot to fit your machine. Walking Feet are not for use in reverse or side to side sewing as well as some built in stitches that include other than forward movement of the feed dogs. Model number: F033N Link to video
Walking Foot 5mm (Horizontal)
Art. No. XC2165002 For improved results when sewing or quilting on fabrics which tend to stick to the bottom of a presser foot or sheer fabrics that are difficult to control. A walking foot assists in keeping the lines matched on multiple layers of plaid fabrics. Compatible with Star 10 to 40E, XL6000 series (5mm horizontal bobbin sewing machine) Model number: F034N Link to video
Stitch Guide Foot
Art. No. XC1969002 The scale on the presser foot can be used for perfect topstitching on both staight and curved lines. Model number: F035N Walking Foot
Art. No. XC2213052 For improved results when sewing or quilting on fabrics which tend to stick to the bottom of a presser foot or sheer fabrics that are difficult to control. A walking foot assists in keeping the lines matched on multiple layers of plaid fabrics. Compatible with PE-300S/ PE-400D Model number: F041N Link to video
Straight Stitch Foot (7mm)
Art. No. XC1973052 This is used for consistent straight stitching on lightweight or sheer fabrics. Compatible with Star 110 to 140E, Super Ace and Super Galaxie series (7mm horizontal bobbin sewing machine) Model Number: F042N Vertical Walking Foot 5mm
Art. No. XC2169002 For improved results when sewing or quilting on fabrics which tend to stick to the bottom of a presser foot or sheer fabrics that are difficult to control. A walking foot assists in keeping the lines matched on multiple layers of plaid fabrics. Compatible with Prestige series BS, LS, PS, PX, VX, XL3000 and 5000 series, XR series Link to video
Edge joining foot
Art. No. XC6441252 Perfect for precise and esy joining of fabrics, even sheer and difficult fabrics. It can also be used to line up and sew lace to the edge of
another fabric. Model number: F056 1/4" Piecing foot with guide
Art. No. XC7416252 Creates perfect quilt and patchwork piecing with 1/4 inch seam allowance. Ideal for long strip piecing. Model number: F057 Link to video
Open Toe Quilting foot
Art. No. XE1097001 The large opening on the front of the foot gives you wide visibility in the needle area. Use for free-motion, outline quilting etc. Model number: F061 Link to video
Open toe walking foot
Art. No. XF1434001 The feed dogs on the walking foot move at the same pace as the machines lower feed dogs to feed the fabric consistantly. Fabrics that can be difficult to sew such as vinyl, leather, quilting layers and velvet can easiliy be sewn. The open toe allows for greater visibility. Model number: F062 Link to video
Vertical stitching alignment foot
Art. No. XE5224001 This specially marked "V" foot is included with the Innov-is I(e) and is also available for other selected models. The side extention ruler on this foot lets you measure the distance from the needle to the edge of your fabric. Roller foot
Art. No. XF1723001 The Roller Foot is designed to feed slippery fabrics such as silk, leather and velvet. The textured rollers on the foot provide pressure for fabrics between foot and feed dogs so that users can sew various slippery fabrics easily and smoothly. The Roller Foot is commonly used with a straight stitch or zig zag
stitch. It can also be used with other utility and decorative stitches. Model number: F066. Circular attachment
Art. No. CIRC1 Circular attachment for sewing in a circle Optional accessory to sew in a circle, with utility and decorative stitches, without side feeding. Compatible with Innov-is I/Ie, Innov-is 4000/ 5000/ 1500/ 2200 series, QC-1000, NX-2000, Innov-is 1200, Innov-is 900/ 950, Innov-is 200/ 350/ 400/ 550/ 600 series and Innov-is 10/ 20/ 30/ 50 series Includes: • Circular attachment • 1 screw for set-up (plus 1 spare) • Braiding foot • Cording foot (3 cords) • Quarter Circular Template • User manual Specification: • Circular size is 30mm to 130mm • Scale displayed on every 5mm • Template is used for matching the first stitch to the last • Can be used with optional presser feet Model Number: CIRC1 Straight Stitch foot and staight stitch needle plate
Art. No. XD0606252 Straight stitch foot and needle plate for perfect straight stitching. Model number: SNP01 Couching Foot & Guide for Dual Feed DF1
Art. No. XG3129001 Enjoy creating fabric surface embellishment with yarn while using the DF1 Dual Feed attachment. Order Code: XG3129001 Direct dual feed attachment (DF1) required
