"the Industry Standard" Our Best Selling Wall Mount Enclosure! Wall

Transcript

Wall Mount Products WM Series Wall Mount Enclosures WM Series Wall Mount/Swing Out Enclosures provide 19" EIA 310-D compliant mounting in a distribution enclosure. A simple snap latch located inside the cab­i­net opens the 18.00" deep center swing section. The center swing-out feature provides outstanding front and rear access to cables and equipment. The reversible cabinet mounting design makes left or right-hand swing-out pos­si­ble. This convenient feature also conserves valuable wall space. Knock-outs sized for 1", 2", and 3" conduits and fittings are located at the top, bottom and rear for easy wiring, installation, and main­ te­nance. Front and rear sections lock independently for added security. Note: GL2418WM, GL24WM, GL36WM, and GL48WM are configured with a plexiglas door and vented sides. Two pairs of #12-24 tapped 19" EIA rails are provided with each en­clo­sure. STOCK COLOR: Black PART NO. DESCRIPTION GL2418WM GL2418WMS GL24WM GL24WMS Dimensions: 24"H x 21.25"W x 18"D Wt. cap.: 150 lbs.* Maximum rail spacing: 11.06" Usable depth: 16" Rack spaces: 12 RMU Shipping wt.: 85 lbs. Plexiglas door Same as GL2418WM except solid door GL36WM GL36WMS Dimensions: 36"H x 21.25"W x 24.50"D Wt. cap.: 250 lbs.* Maximum rail spacing: 17.62" Usable depth: 22" Rack spaces: 19 RMU Shipping wt.: 125 lbs. Plexiglas door Same as GL36WM except solid door GL48WM GL48WMS Dimensions: 48"H x 21.25"W x 24.50"D Wt. cap.: 300 lbs.* Maximum rail spacing: 17.62" Usable depth: 22" Rack spaces: 25 RMU Shipping wt.: 160 lbs. Plexiglas door Same as GL48WM except solid door Equipment mounting hardware included Dimensions: 24"H x 21.25"W x 24.50"D Wt. cap.: 150 lbs.* Maximum rail spacing: 17.62" Usable depth: 22" Rack spaces: 12 RMU Shipping wt.: 95 lbs. Plexiglas door Same as GL24WM except solid door *Maximum weight capacities at minimal deflection. 6 "The Industry Standard" Our Best Selling Wall Mount Enclosure! www.werackyourworld.com WM Series Wall Mount Enclosures P/N GL2418WM GL24WM GL36WM GL48WM A (in.) 24.00 24.00 36.00 48.00 B (in.) 11.25 18.00 18.00 18.00 Option: 2, Fan unit ventilation top or bottom mounting C (in) 18.00 24.50 24.50 24.50 Knock-out for conduit Conduit sizes 1", 2", 3" and horseshoe knock-out top & bottom rear section Center swing section 19"EIA Rack spaced 2 pair mounting rails tapped #12-24 Continuous Hinges- std. Front door & rear section Independent locking front door & rear section Front door Keyhole Mounting Knock-out for conduit Conduit sizes 1", 2", 3" rear section Side Ventilation Knock-out for conduit Conduit sizes: 1", 2", 3" and horseshoe knock-out top & bottom rear section 21.25 10.63 2.50 10.63 Note 2: Fan unit mounting shown for GL24WM, GL36WM, and GL48WM. Fan unit mounting rotated 90 degrees on GL2418WM. "A" 16.00 18.31 21.25 "B" 5.00 "C" ACCESSORIES PART NO. 7217WS 7206-FM 7206-EIA New 7206-FR-A18 7206-SL 7206-14 7219 7219-SR14 7219-20AR CBB-19 FFK1 DK2 DESCRIPTION Fan assembly w/fan guards and two 75 CFM fans Stationary front mount shelf – 17.25"W x 18.00"D Stationary shelf – 17.468"W x 18.00"D Stationary shelf (front/rear mount adj.) – 18"D Wt. cap.: 150 lbs. Sliding shelf – 16.343"W x 17.50"D Stationary shelf 17.50"W x 14.00"D (Recommended for GL2418WM) 6 position power strip w/circuit breaker and 15 ft. cord for 19" mounting 14 position (6 front/8 back) power strip w/circuit breaker and surge suppressor for 19" mounting 6 position power strip w/circuit breaker (20 amp) Copper bus bar; 19" rack mounted (isolated) Four fan filters (works with the WM, WS, and WD Series) Dust resistant kit - kit contains 4 cover plates, 4 fan filters, & hardware (for WM Series only) www.werackyourworld.com 7 Wall Mount Products Rear Section