Transcript
QX566i Specifications 3-WAY FULL-RANGE LOUDSPEAKER 60° × 60° See NOTES TABULAR DATA for details
CONFIGURATION
Subsystem:
Transducer LF 4× 12 in cone
Loading Phase Aligned™
MF 1× 2 in exit, Horn-loaded 3.5 in compression mid
HF 1× 2 in exit, 1.75 in compression driver
Operating Mode: Amplifier Channels Bi-amp (Passive MF/HF) LF, MF/HF
Horn-loaded
External Signal Processing DSP w/EAW Focusing
PERFORMANCE Operating Range: 55 Hz to 20 kHz Nominal Beamwidth: Horz 60° Vert 60°
FEATURES • High output, bi-amplified, three-way performance
Axial Sensitivity (whole space SPL): LF 103 dB MF/HF 112 dB
55 Hz to 550 Hz 430 Hz to 20 kHz
Input Impedance (ohms) Nominal
Minimum
4 @ 210 Hz 2 @ 210 Hz
LF1, LF2 (each) 4
• Broadband pattern control
LF (total) 2
• Ultra-efficient, coaxial MF/HF compression driver
MF/HF 8
• Four Phase Aligned™ 12-in cone transducers (vertical and horizontal pairs)
High Pass Filter High Pass =>60 Hz, 12 dB/octave Butterworth
• Installation flexibility
6.3 @ 3070 Hz
Accelerated Life Test
APPLICATIONS
LF1, LF2 (each) 63 V
1000 W @ 4 ohm 2000 W @ 2 ohm
LF (total) 63 V
Houses of worship, arenas, outdoor stadiums, performing arts venues, theaters and clubs
MF/HF 37 V
Calculated Axial Output Limit (whole space SPL) Average
Peak
DESCRIPTION
142 dB
MF/HF 134 dB
140 dB
The new QX Series delivers high output, broadband pattern control and exceptional fidelity for a wide range of permanently installed applications. Its high output level make it appropriate for long throws in arenas and stadiums or for high-energy applications like live music venues or dance clubs. Its broadband pattern control lets it tame hostile acoustical environments like cathedrals or highly reverberant public spaces. And its exceptional fidelity pleases the most critical listeners in concert halls and performing arts centers. The QX566i loads an ultra-efficient mid/high compression driver with a 60° (h) x 60° (v) constant directivity horn. Four Phase Aligned™ 12-in low frequency transducers arranged as vertical and horizontal pairs leverage beneficial interaction based on their spacing to extend pattern control well into the low frequency range.
LF 136 dB
175 W @ 8 ohm
ORDERING DATA Description EAW QX566i 3-Way Full-Range Loudspeaker Black EAW QX566i 3-Way Full-Range Loudspeaker White
Part Number 2039612 2039624
EAW QX566i-WP 3-Way Full-Range Loudspeaker Black 2039617 Optional Accessories Adapter Bracket QX BLK [ACC-ABQX] Weather Protection Shield QX BLK [ACC-WPSQX] U-Bracket Horizontal QX BLK [UBKT-QXH]
2036437 2036515 2036568
Because the four low frequency transducers surround the coaxial mid/high compression driver symmetrically in both the horizontal and vertical planes, response across the full frequency spectrum appears to originate from a single point in space. This basic design facilitates an idealized summation of the three frequency sections, eliminating the anomalies associated with designs that physically offset the sections. This idealized coherence applies in both the horizontal and vertical planes throughout the coverage area. Six year warranty.
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: RD0682 Rev C00
SEP2014
EAW products are continually improved. All specifications are therefore subject to change without notice.
A
B
C
40°
B 22.01 [559.1]
1
2
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY AND CONFIDENTIAL PROPERTY OF LOUD TECHNOLOGIES, INC. ALL RIGHTS RESERVED
THIRD ANGLE PROJECTION
54°
3
DIMENSIONS ACROSS CENTERLINES TO BE SYMMETRICAL
TSC = THEORETICAL SHARP CORNER
(X.XX) = REF DIMS NO TOLERANCE IMPLIED
TOLERANCE IN INCHES LINEAR ± 0.13 in / ± 3.3 mm ANGLES ± 1°
4 ECOWHT8684
DATE
www.eaw.com
BACK
06/08/12
D PRO ENGINEER
A
B
C
ENCLOSURE Material Exterior-grade Baltic birch plywood Finish Wear resistant textured black paint Grille Powder-coated perforated steel
Part Number: RD0682 Rev C00
2039636-CD-D_DWG-CUSTOMR_QX500I
4
REVISION:
0.040
SCALE:
2039636-CD
SHEET 1 OF 1 DRAWING NUMBER:
A
DWG CUSTOMER QX500i SERIES [MECHANICAL SPECIFICATION]
TITLE:
ACCESS PANEL
INPUT
QX500i
2.17 [55.1]
D
REV CHANGE NUMBER
10.90 [276.9]
UNLESS OTHERWISE SPECIFIED: ALL DIMENSIONS ARE IN INCHES DUAL [MM] DIMENSIONS FOR REF ONLY
RIGHT SIDE
A
VIEW A-A
6.00 [152.4]
3
DIMENSIONS APPLY TO BOTH SIDES
16.6 [422]
22.03 [559.5]
12.26 [311.3]
11.93 [303.1]
A
12.26 [311.3]
10.90 [276.9]
VIEW B-B
6.00 [152.4]
2
NOTES: 1. SYMBOL INDICATES CENTER OF BALANCE. 2. SYMBOL INDICATES MOUNTING POINT, 3/8-16THREADED HOLE. 3. WEIGHT APPROX. 134 lb [61 kg]. 4. SHIPPING WEIGHT APPROX. 149 lb [68 kg].
FRONT
GRILLE NOT SHOWN FOR CLARITY
28.0 [710]
B
28.0 [710]
23.8 [605]
1.67 2.17 [42.3] [55.1]
TOP/BOTTOM
15.9 [403]
1
QX566i Specifications
NOTE: This drawing has been reduced. Do not scale.
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com
SEP2014
QX566i Specifications PERFORMANCE DATA
See NOTES GRAPHIC DATA for details Frequency Response: Processed
Frequency Response: Unprocessed LF = green, HF = black
10
120
0
110
-10
100
SPL (dB)
SPL (dB)
LF = green, HF = black, Complete = blue
-20
90
-30
80
-40
70
-50
10
100
1000
Frequency (Hz)
60
20000
Impedance
10
100
1000
20000
Frequency (Hz)
Phase Linearity
LF = green, HF = black
Complete = blue 180
100
Degrees
Ohms
90
10
-0
-90
-180
1 10
100
1000
Frequency (Hz)
20000
10
100
1000
Frequency (Hz)
20000
Beamwidth
Horizontal = orange Vertical = black 360
Degrees
100
10
1
100
1000
20000
Frequency (Hz)
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: RD0682 Rev C00
SEP2014
QX566i Specifications HORIZONTAL POLAR DATA
See NOTES GRAPHIC DATA for details 90˚
90˚ 135˚
135˚
45˚
180˚
0˚
-135˚
100Hz 125Hz 160Hz 200Hz
45˚
180˚
-135˚
-45˚
-90˚
90˚
90˚ 135˚
45˚
180˚
0˚
-135˚
250Hz 315Hz 400Hz 500Hz
45˚
180˚
-135˚
-45˚
-45˚
-90˚
-90˚
90˚
90˚
135˚
135˚
45˚
180˚
0˚
-135˚
-45˚
630Hz 800Hz 1000Hz 1250Hz
0˚
4000Hz 5000Hz 6300Hz 8000Hz
-45˚
-90˚
135˚
0˚
1600Hz 2000Hz 2500Hz 3150Hz
45˚
180˚
0˚
-135˚
-90˚
10000Hz 12500Hz 16000Hz
-45˚ -90˚
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: RD0682 Rev C00
SEP2014
QX566i Specifications VERTICAL POLAR DATA
See NOTES GRAPHIC DATA for details 90˚
90˚ 135˚
135˚
45˚
180˚
0˚
-135˚
100Hz 125Hz 160Hz 200Hz
45˚
180˚
-135˚
-45˚
-90˚
90˚
90˚ 135˚
45˚
180˚
0˚
-135˚
250Hz 315Hz 400Hz 500Hz
45˚
180˚
-135˚
-45˚
-45˚
-90˚
-90˚
90˚
90˚
135˚
135˚
45˚
180˚
0˚
-135˚
-45˚
630Hz 800Hz 1000Hz 1250Hz
0˚
4000Hz 5000Hz 6300Hz 8000Hz
-45˚
-90˚
135˚
0˚
1600Hz 2000Hz 2500Hz 3150Hz
45˚
180˚
0˚
-135˚
-90˚
10000Hz 12500Hz 16000Hz
-45˚ -90˚
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: RD0682 Rev C00
SEP2014
QX566i Specifications
REVISIONS REV:
DESCRIPTION:
A00
NEW ISSUE PER ECOWHT7022 MJC
INPUT PANEL
SIGNAL DIAGRAM 3-Way, Bi-Amp (LF, MF/HF)
AMP EAW FOCUSING
XVR
AMP
HF
MF
LF
LEGEND
TITLE:
LOUD Technologies Inc. ONE MAIN STREET, WHITINSVILLE, MA 01588 USA
NOTES ADOBE ILLUSTRATOR
DRAWN BY:
MJC
HPF: LPF: LF/MF/HF: AMP: XVR: DWG SPEC/INPUT QX500 SERIES EAW Focusing:
DATE:
10/20/10
SCALE:
1:1
TABULAR DATA
REV:
DRAWING NUMBER:
2036165-SD
LOUD TECHNOLOGIES INC, ALL RIGHTS RESERVED
High Pass Filter for crossover –or– Recommended High Pass Filter. Low Pass Filter for crossover. Low Frequency / Mid Frequency / High Frequency. User Supplied Power Amplifier –or– Integral Amplifier for NT products. Passive LPFs, HPFs, and EQ integral to the loudspeaker. Digital Signal Processor capable of implementing EAW Focusing.
A00 SHEET:
1 of 1
1. Measurement/Data Processing Systems: Primary - FChart: proprietary EAW software; Secondary - Brüel & Kjær 2012. 2. Microphone Systems: Earthworks M30; Brüel & Kjær 4133 3. Measurements: Dual channel FFT; length: 32 768 samples; sample rate: 48 kHz; logarithmic sine wave sweep. 4. Measurement System Qualification (includes all uncertainties): SPL: accuracy +/-0.2 dB @ 1 kHz, precision +/-0.5 dB 20 Hz to 20 kHz, resolution 0.05 dB; Frequency: accuracy +/-1 %, precision +/-0.1 Hz, resolution the larger of 1.5 Hz or 1/48 octave; Time: accuracy +/-10.4 μs, precision +/-0.5 μs, resolution 10.4 μs; Angular: accuracy +/-1°, precision +/-0.5°, resolution 0.5°. 5. Environment: Measurements time-windowed and processed to eliminate room effects, approximating an anechoic environment. Data processed as anechoic or fractional space, as noted. 6. Measurement Distance: 7.46 m. Acoustic responses represent complex summation of the subsystems at 20 m. SPL is referenced to other distances using the Inverse Square Law. 7. Enclosure Orientation: For beamwidth and polar specifications, as shown in Mechanical Specification drawing. 8. Volts: Measured rms value of the test signal. 9. Watts: Per audio industry practice, “loudspeaker watts” are calculated as voltage squared divided by rated nominal impedance. Thus, these are not True Watt units of energy as defined by International Standard. 10. SPL: (Sound Pressure Level) Equivalent to the average level of a signal referenced to 0 dB SPL = 20 microPascals. 11. Subsystem: This lists the transducer(s) and their acoustic loading for each passband. Sub = Subwoofer, LF = Low Frequency, MF = Mid Frequency, HF = High Frequency. 12. Operating Mode: User selectable configurations. Between system elements, a comma (,) = separate amplifier channels; a slash (/) = single amplifier channel. DSP = Digital Signal Processor. IMPORTANT: To achieve the specified performance, the listed external signal processing must be used with EAW-provided settings. 13. Operating Range: Range where the processed Frequency Response stays within -10 dB SPL of the power averaged SPL within this range; measured on the geometric axis. Narrow band dips are excepted. 14. Nominal Beamwidth: Design angle for the -6 dB SPL points, referenced to 0 dB SPL as the highest level. 15. Axial Sensitivity: Power averaged SPL over the Operating Range with an input voltage that would produce 1 W at the nominal impedance; measured with no external processing on the geometric axis, referenced to 1 m. 16. Nominal Impedance: Selected 4, 8, or 16 ohm resistance such that the minimum impedance point is no more than 20% below this resistance over the Operating Range. 17. Accelerated Life Test: Maximum test input voltage applied with an EIA-426B defined spectrum; measured with recommended signal processing and Recommended Protection Filter. 18. Calculated Axial Output Limit: Highest average and peak SPLs possible during the Accelerated Life Test. The Peak SPL represents the 2:1 (6 dB) crest factor of the Life Test signal. 19. High Pass Filter: This helps protect the loudspeaker from excessive input signal levels at frequencies below the Operating Range.
GRAPHIC DATA
1. Resolution: To remove insignificant fine details, 1/12 octave cepstral smoothing was applied to acoustic frequency responses and 1/3 octave cepstral smoothing was applied to the beamwidth and impedance data. Other graphs are plotted using raw data. 2. Frequency Responses: Variation in acoustic output level with frequency for a constant input signal. Processed: normalized to 0 dB SPL. Unprocessed inputs: 2 V (4 ohm nominal impedance), 2.83 V (8 ohm nominal impedance), or 4 V (16 ohm nominal impedance) referenced to a distance of 1 m. 3. Processor Response: The variation in output level with frequency for a constant input signal of 0.775 V = 0 dB reference. 4. Beamwidth: Average angle for each 1/3 octave frequency band where, starting from the rear of the loudspeaker, the output first reaches -6 dB SPL referenced to 0 dB SPL as the highest level. This method means the output may drop below -6 dB SPL within the beamwidth angle. 5. Impedance: Variation in impedance magnitude, in ohms, with frequency without regard to voltage/current phase. This means the impedance values may not be used to calculate True Watts (see 9 above). 6. Polar Data: Horizontal and vertical polar responses for each 1/3 octave frequency band 100 Hz to 16 kHz or Operating Range.
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: RD0682 Rev C00
SEP2014
