Preview only show first 10 pages with watermark. For full document please download

R1 "abs+pla Model" Specs: Abs And Pla Physical Dimensions

   EMBED

Share

Transcript

R1 "ABS+PLA Model" Specs: ABS and PLA Physical Dimensions With Spool Holder: Without Spool Holder: Weight: Shipping Weight: 15 x 22 x 18.25 in [38.1 x 55.88 x 46.35 cm] 15 x 17 x 18.25 in [38.1 x 43.18 x 46.35 cm] 25.7~ [11.65 kg] 49.0 lbs [22.22 kg] Foot Print Y Axis (As the bed moves past the machine dimensions)= 26" Build Volume: 10x9x8 inches (254x228.6x203.2mm) -720 cubic inches Heated Bed: 8.4x8.4 heated surface on 10x10 bed for printing in ABS plastic as well as PLA Hot end Nozzle Diameter: 0.4 mm diameter Filament: Uses 1.75mm diameter filament Motors: 5 Nema 17 motors with 48 oz/in holding torque Electronics: Arduino MEGA 2560 with RAMPS 1.4 shield. Uploaded with the latest Marlin Firmware. Layer Resolution: 100 Microns Power supply: 12V 30Amps switching power supply (good for both 115v and 230v outlets) Plastic Injection Molded parts for longer lasting 3D printer 8 lm8uu bearings for precise movement FULLY ASSEMBLED