Transcript
RA 6025 Digital IR High Power Radiator Configuration RA 6025
The Digital IR High Power Radiator converts the digital, modulated signal from the transmitter into invisible Infra Red light. The unit is powered locally, can broadcast all 32 channels and can cover up to 20,000 ft² (1,858.0 m²) with four (4) mono standard quality channels. When more channels and/or a higher channel quality and/or stereo signals are used, the coverage area is reduced. The radiator operates noise-free and indicates both by LED’s in the unit and by communication to the Digital Transmitter its status. The radiator goes automatically standby when the transmitter is switched off to extend the operating life. The radiator can be either wallmounted or stand-mounted and up to 30 Digital Radiators can be daisy-chained into a 2,970 ft. (905.3 m) daisy chain.
Highlights • Up to 32 channels. • 20,000 ft² radiator coverage.
Includes RA 6025 Mounting bracket Line cable
• Can be used in bright sunlight.
Used With
• Daisy-chain option. • Delay compensation. • Noise-free operation. • Automatic standby. • Overheat protection.
DT 6008 DT 6032 RA 6013 RA 6025 DR 6004 DR 6008 DR 6032
Listen Technologies Corporation • 14912 Heritagecrest Way • Bluffdale • Utah 84065-4818 U.S.A. +1.801.233.8992 • +1.800.330.0891 North America • +1.801.233.8995 Fax Listen Technologies Corporation All rights reserved 121707
RA 6025 Page
Specifications
Controls & Indicators
Interconnections
Power
Physical
Capacity
Delay switches
Two (2) rotary switches to set the a signal delay when used in a daisy-chain
LED’s
Two (2) yellow and Two (2) red LED’s to indicate radiator status
Half-power switch
Switch to de-activate half the IR-LED’s of the unit, thus reducing emitted power and power consumption by half
Mains socket
Euro mains socket, matching mains cable 5.58 ft. (1.7 m) included
Radiator chain input
One (1) BNC female connector to connect the input signal
Radiator chain loop-through
One (1) BNC female connector to connect the next radiator
Supply voltage
90 - 260 VAC
Power consumption
180 W
Total IR output at 20° C -room temp
16 Wrms 32 Wpp
Angle of half intensity
+/- 22 degrees
Dimensions (H x W x D) (without brackets)
11.8 x 19.7 x 6.9 in. (300 x 500 x 175 mm)
Color
Bronze w/black
Unit weight (with bracket)
22.7 lbs. (10.30 kg)
Shipping weight
24.0 lbs. (10.89 kg)
Mounting
Wall-mounted or stand-mounted
Maximum coverage area
20,000ft2 (1,858.0 m2) w/four (4) channels mono standard quality.
Total maximum radiator cable length
Approx. 2.970 ft. (900 m)
Listen Technologies Corporation • 14912 Heritagecrest Way • Bluffdale • Utah 84065-4818 U.S.A. +1.801.233.8992 • +1.800.330.0891 North America • +1.801.233.8995 Fax Listen Technologies Corporation All rights reserved 121707
RA 6025 Page
Accessories LA-337
IR Radiator Floor Stand This portable tripod floor stand allows you to mount up to 2 LA-140 Stationary IR Radiators horizontally or vertically. It also allows you to mount a single Digital IR radiator (RA 60xx). Made of sturdy aluminum and glass-reinforced polycarbonate fittings this stand is also lightweight enough for portable application.
LA-392
RG-59 75 Ohm Preassembled Coaxial Cable Listen will cut and terminate your desired cable in requested length. (10 ft. (3 m) minimum order.
LA-86
RG-59 Coaxial Cable This coaxial cable is 75 ohm cable and is required to connect the IR transmitter to its radiators. Cable delaty is 1.54 ns/ft. Use this figure when using the Infrared Delay Calculator.
LA-87
BNC Connector for RG-59 Coaxial Cable BNC connector for RG-59 coaxial cable. Crimp style. If you wish to have connectors installed order LA-392 RG-59 75 Ohm Presassemblied Cable.
WB 6000
Digital IR Radiator Mounting Bracket The Digital IR Radiator Mounting Bracket is used to mount the RA 6013 or RA 6025 Digital Radiator on the wall.
Listen Technologies Corporation • 14912 Heritagecrest Way • Bluffdale • Utah 84065-4818 U.S.A. +1.801.233.8992 • +1.800.330.0891 North America • +1.801.233.8995 Fax Listen Technologies Corporation All rights reserved 121707
RA 6025 Page
FAQ’s
Q Is there a floor stand for the RA 6013 and RA 6025 infrared radiator?
A Yes, our floor stand LA-337 can be used to mount these radiators.
Q How can I avoid interference between lighting and Digital IR systems?
A Our Digital IR system is interference free from lighting equipment and day/sun light.
Q How can I mount an infrared Radiator RA 6013 or RA 6025 to the wall?
Use a Wall mounting bracket WB 6000. The bracket has 4 holes for mounting to the wall. The unit includes a A template for accurate positioning.
Q Is it necessary to terminate unused outputs of the Digital IR transmitter or Radiators? A No, not needed. All outputs are terminated automatically.
Listen Technologies Corporation • 14912 Heritagecrest Way • Bluffdale • Utah 84065-4818 U.S.A. +1.801.233.8992 • +1.800.330.0891 North America • +1.801.233.8995 Fax Listen Technologies Corporation All rights reserved 121707
RA 6025 Page
