Preview only show first 10 pages with watermark. For full document please download

Rack Mount Kits Lcd-15/17p-rmk

   EMBED

Share

Transcript

DIMENSIONS Rack Mount Kits LCD-15/17P-RMK 15" LCD SUB RACK 2- 7.0 482.6 465.1 352.6 36.6 31.3 2- 7 hole Instruction Manual 10.7 30.0 205.4 287.9 227.2 260.4 205.4 279.3 305.3 2- 6 hole 310.3 (7U) 11.7 2- 6 31.3 8.5 55.0 83.4 5.5 17" LCD SUB RACK 46.4 41.4 2- 7.0 482.6 465.0 400.0 5.5 180.0 399.2 (9U) 336.0 223.0 393.2 180.0 279.3 295.0 39.6 2- 5.5 30.0 46.4 15.5 23.6 23.0 40.6 69.0 Unit: mm Please read this manual thoroughly before use, and keep it handy for future reference. INTRODUCTION INSTALLATION This document provides installation instruction for the rack mount kits. * Medium size Philips screwdriver is required. * Start installation with proper instructions below. UNPACKING Verify the parts shown in the parts lists below. INSTALLATION SEQUENCES the two side panels with the screw holes 1 * Align in the monitor. * Attach the side panel to the LCD using M5 x 8 machine screw. 15" 17" LCD SUB RACK Items included(Quantity) - Front panel : (1) - Side panel : Left (1), Right (1) - M3 x 6 Screws (4) - M5 x 8 Screws (4) 2 * Align side panel holes with the rack holes. * Attach with four rack mounting screws, which are not included and must be supplied by the installer. * If the rack mountrail does not have thread, clip four U-clip nuts over the rack rail holes. 3 * Attach the front panel with M3 x 6 taptite screws.