Transcript
PROLINE G2 Internal Components Rack-Mount Angles and Accessories Spec-01200
Rack Angles Overview Rack Angles can be mounted directly to the enclosure frame or on grid system straps at almost any depth location. Rack Angles are plated. All mounting hardware to install Rack Angles is included. (Order cage nuts for square hole Rack Angles separately.) • T he standard rack angle position is 44 mm behind the door opening. Rack Angles can be moved forward if desired. Deeper positions require the use of Grid Straps. 1200-mm and 1600-mm frames require center uprights to mount Rack Angles in right bay or left bay. • Shelves, drawer, guides and pull-out shelves require two sets of Rack Angles or frame accessory brackets installed in the frame.
All Rack Angles have two mounting surfaces that serve as mounts for both rack equipment and rack accessories. Rack Angles are furnished in pairs and are available with tapped holes that directly accommodate 10-32 screws or square holes for use with cage nuts and M5, M6 or 10-32 screws. Rack Angles comply with ANSI/EIA RS-310-D rack mounting standards.
19-Inch Rack Angles
Static Load Notes It is important to comply with manufacturers’ recommendations for rack mounting support. Follow mounting directions for individual equipment. Max. 20 lb. (9.1 kg) per rack unit for equipment under 20 in. (508 mm) deep. Equipment over 20 in. (508 mm) deep or over 20 lb. (9.1 kg) per rack unit requires rear support.
FINISH
Plated
LOAD RATING • •
0 lbs. (9.1 kg) per rack unit for equipment under 20 in. (508 mm) 2 deep Equipment over 20 in. (508 mm) deep or over 20 lb. (9.1 kg) per rack unit requires rear support
ACCESSORIES
APPLICATION
19-in. Rack Angles can easily be mounted in a modular enclosure. Furnished in pairs, Rack Angles have two mounting surfaces (left and right) that serve as mounts for both rack equipment and rack accessories. Rack Angles can be attached to the frame in the front and/or the back. Adjustable Rack-Mounting Rails can be used to position Rack Angles anywhere within the modular enclosure frame.
FEATURES • • •
omply with ANSI/EI A RS-310-D rack mounting standards C Can be mounted directly to the enclosure frame or in almost any location using Adjustable Rack-Mounting Rails or Grid Straps. Furnished in pairs and are available with tapped holes that directly accommodate 10-32 screws or square holes for use with cage nuts and M5, M6 or 10-32 screws
SPECIFICATIONS • • • • •
•
•
1
apped Rack Angles are 12 gauge (2.5mm) steel with 10-32 T tapped holes Square-Hole Rack Angles are 14 gauge (1.75 mm) steel designed to accept metric or English cage nuts Attach directly into a 600-mm wide enclosure frame To mount in 800-mm wide frames, use frame reducing brackets (not included) or Adjustable Rack-Mounting Rails 1200-mm frames require center uprights (not included) to mount in right or left section; 1600-mm frames require both center uprights and two sets of frame reducing brackets or Adjustable Rack-Mounting Rails Optional rack mounted shelves, drawers, guides and pull-out shelves require two sets of Rack Angles or Frame Accessory Brackets installed in the frame All mounting hardware to install Rack Angles to the frame is included (Hardware to attach items to the Rack Angles are either included with the item or purchased separately if necessary) Modular Enclosure Solutions
• • • • • • • • • • • • • • •
Frame Accessory Brackets Frame-Reducing Brackets Grid Straps Center Upright Rack Panels Rack Mount Pull-out Shelf Rack Mount Fixed Shelf Rack Angle Mounted Drawer Writing Surface Adjustable Rack-Mounting Rails Slides Filler Panel for Rack Angles Rack Angle Adapter Bracket S crew Package Cage Nut Package
Bulletin: P40
Standard Product Catalog Number P2RA19S6 P2RA19T6 P2RA19S8 P2RA19T8 P2RA19S10 P2RA19T10 P2RA19S12 P2RA19T12 P2RA19S14 P2RA19T14 P2RA19S16 P2RA19T16 P2RA19S18 P2RA19T18 P2RA19S20 P2RA19T20 P2RA19S22 P2RA19T22
Hole Type SQUARE TAPPED SQUARE TAPPED SQUARE TAPPED SQUARE TAPPED SQUARE TAPPED SQUARE TAPPED SQUARE TAPPED SQUARE TAPPED SQUARE TAPPED
H (mm) 490 490 667 667 890 890 1067 1067 1290 1290 1467 1467 1690 1690 1867 1867 2090 2090
H (in.) 19.3 19.3 26.3 26.3 35.0 35.0 42.0 42.0 50.8 50.8 57.8 57.8 66.5 66.5 73.5 73.5 82.3 82.3
Fits Frame Height (mm) 600 600 800 800 1000 1000 1200 1200 1400 1400 1600 1600 1800 1800 2000 2000 2200 2200
Rack Units 11 11 15 15 20 20 24 24 29 29 33 33 38 38 42 42 47 47
Frame height dimensions are nominal mm.
SUBJECT TO CHANGE WITHOUT NOTICE
Electrical
Spec-01200 C
PROLINE G2 Internal Components Rack-Mount Angles and Accessories
Model
Component
Type
Specialty
Height
Catalog Number
P2
R
A19
S
20
P2RA19S20
PROLINE G2
Rack Accessory
A19 = 19" rack angle SFH = swing frame, heavy-duty
Blank = standard S = square (19” rack angle only)
T
= tapped
(19” rack angle only)
Electrical
Spec-01200 C
PH 763.422.2211 • • FAX 763.422.2600 • • pentairprotect.com
mm 22 = 2200 20 = 2000 18 = 1800 16 = 1600 14 = 1400 12 = 1200 10 = 1000 8 = 800 6 = 600
NOTE: Not every combination is available as a standard product.
Modular Enclosure Solutions
2
PROLINE G2 Internal Components Rack-Mount Angles and Accessories
Frame Reducing Brackets
APPLICATION • •
rame-Reducing Brackets are used to reduce wider frames to F 600mm, allowing 19-in. rack angles to fit. Brackets can also be used to left- or right- justify rack-mounted equipment
SPECIFICATIONS • • •
urnished in sets of four F 14 gauge (1.75 mm) steel Mounting hardware included
FINISH
Plated
Bulletin: P40 Catalog Number P2AFRB50 P2AFRB100 P2AFRB200
D (mm) 50 100 200
Adjustable Rack-Mounting Rails Catalog Number P2GARA4 P2GARA5 P2GARA6 P2GARA7 P2GARA8 P2GARA9 P2GARA10
D (in.) 2.0 3.9 7.9
Converts Frame Width (mm) From 800 to 700 From 800 to 600 From 1000 to 600
Fits Frame Depth mm/in. 400 500 600 --800 --1000
Frame Depth dimensions are nominal mm.
APPLICATION
PROLINE G2 Adjustable Rack-Mounting Rails allow 19-in. Rack Angles to be positioned anywhere within the modular enclosure frame.
SPECIFICATIONS • • •
I ncludes two right-hand and two left-hand mounting rails 12 gauge (2.5 mm) steel Mounting hardware is included
FINISH
Plated
Bulletin: P40
3
Modular Enclosure Solutions
SUBJECT TO CHANGE WITHOUT NOTICE
Electrical
Spec-01200 C
PROLINE G2 Internal Components Rack-Mount Angles and Accessories
Frame Accessory Brackets
Catalog Number P2AFB19
Description 19-in. Frame Accessory Bracket
APPLICATION
Frame Accessory Brackets mount directly to the PROLINE G2 frame and are used in place of rack angles to mount rack accessories such as shelves and pull-out shelves.
7<3
SPECIFICATIONS • • •
7<3
urnished in sets of four F 14-gauge (1.75 mm) steel Mounting hardware included
7<3
FINISH
Plated
7<3 7<3
Bulletin: P40
Rack Angle Adapter Bracket
Rack Angle Adapter Brackets mount to PROLINE and PROLINE G2 Rack Angles. They bring out the rear leg mounting surface to allow traditional Rack Mount Slides (A16SL2U, sold separately) to be used. Fits tapped or through-hole PROLINE and PROLINE G2 Rack Angles. Rack Angle Adapter Brackets come in a quantity of four and are 14 gauge steel. They have a plated finish. Bulletin: P20 Catalog Number PBRAA
Electrical
Spec-01200 C
PH 763.422.2211 • • FAX 763.422.2600 • • pentairprotect.com
Gauge 14
Use With Rack-Mount Slides A16SL2U
Modular Enclosure Solutions
4
PROLINE G2 Internal Components Rack-Mount Angles and Accessories
Center Upright
FINISH • •
olyester powder paint; RAL 7035 textured light gray standard P Custom colors available
Bulletin: P40 Catalog Number P2ACU6 P2ACU8 P2ACU10 P2ACU12 P2ACU14 P2ACU16 P2ACU18 P2ACU20 P2ACU22
H (mm) 544 744 944 1144 1344 1544 1744 1944 2144
H (in.) 21.4 29.3 37.2 45.0 52.9 60.8 68.7 76.5 84.4
Fits Frame Height (mm) 600 800 1000 1200 1400 1600 1800 2000 2200
APPLICATION
Center Uprights are vertical channels that attach to the frame (top and bottom). They are frequently used in wider frames to facilitate the installation of 19-in. rack accessories.
FEATURES • •
he vertical hole pattern matches the vertical hole pattern in the T frame Sold individually and include mounting hardware
SPECIFICATIONS •
•
5
an be used in 800-, 1000-, 1200- and 1600-mm wide frames to C facilitate the installation of accessories for 600-mm wide frames and 19-in. rack accessories 12-gauge (2.5 mm) mild steel
Modular Enclosure Solutions
SUBJECT TO CHANGE WITHOUT NOTICE
Electrical
Spec-01200 C
PROLINE G2 Internal Components Rack-Mount Angles and Accessories
Rack Panels
Rack Panels are available in aluminum and painted steel. Aluminum Rack Panels are .125-in.-thick 5052-H32 alloy. Steel Rack Panels are 12 gauge steel and finished in RAL 7035 textured light-gray polyester powder paint. All panels are flat with oblong holes positioned at EIA standard spacing. Mounting hardware is sold separately. Bulletin: P20
Material Aluminum Steel Aluminum Steel Aluminum Steel Aluminum Steel Aluminum Steel Steel Aluminum Aluminum Steel Steel Aluminum Aluminum Steel Aluminum Steel Aluminum Steel Aluminum Steel Aluminum Steel Aluminum Steel Steel Aluminum Steel Aluminum Steel Aluminum Steel Steel Aluminum Steel Aluminum Steel Steel Aluminum Aluminum Steel Aluminum
Catalog Number P19RP1UA P19RP1UP P19RP2UA P19RP2UP P19RP3UA P19RP3UP P19RP4UA P19RP4UP P19RP5UA P19RP5UP P19RP6UP P19RP6UA P19RP7UA P19RP7UP P19RP8UP P19RP8UA P19RP9UA P19RP9UP P19RP10UA P19RP10UP P19RP11UA P19RP11UP P19RP12UA P19RP12UP P19RP16UA P19RP16UP P23RP1UA P23RP1UP P23RP2UP P23RP3UA P23RP3UP P23RP4UA P23RP4UP P24RP2UA P24RP2UP P24RP3UP P24RP4UA P24RP4UP P24RP5UA P24RP5UP P24RP6UP P24RP8UA P23RP2UA P24RP8UP P24RP3UA
Cage Nut Package Twenty plated cage nuts are included in each package. Available in #10-32, #12-24, M5 and M6, these cage nuts fit all PROLINE and PROLINE G2 rack angles with square holes. Bulletin: DACCY
Screw Package Twenty plated screws are included in each package. Screws attach rack panels to rack mounting angles. Available in #10-32, #12-24, M5 and M6. Bulletin: A80, DACCY, X20
Electrical
Spec-01200 C
Rack Angle Size 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 19 in. 23 in. 23 in. 23 in. 23 in. 23 in. 23 in. 23 in. 24 in. 24 in. 24 in. 24 in. 24 in. 24 in. 24 in. 24 in. 24 in. 23 in. 24 in. 24 in.
Rack Units 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 16 16 1 1 2 3 3 4 4 2 2 3 4 4 5 5 6 8 2 8 3
Catalog Number P1032CN P1224CN PM5CN PM6CN
Description 10-32 thread 12-24 thread Metric M5 thread Metric M6 thread
Pkg. Qty. 20 20 20 20
Catalog Number AS1032 ES1224 ASM5 ASM6 ASM6250
Description 10-32 x .75 12-24 x .5 Metric M5 x 20 Metric M6 x 16 Metric M6 x 16
Pkg. Qty. 20 20 20 20 250
PH 763.422.2211 • • FAX 763.422.2600 • • pentairprotect.com
Modular Enclosure Solutions
6
