Transcript
shower fittings
Rada vr125 vandal resistant shower fitting Vandal resistant shower head Durable polished chrome finish 15 mm falling push-fit straight pipe connection Optional ‘Rada Riser Pipe’ suitable Fitted with single spray pattern plate with adjustable angle of discharge
Fitted with 9 litres/minute flow regulator (6 litre regulator available)
Specify as: Rada VR125 (1.0.098.81.1) Vandal resistant shower fitting for connection to falling surface pipework with fixed spray plate and 9 l/min flow regulator.
Dimensions (mm)
Pressure Loss/Flow Rate (with VR spray plate)
Spray Patterns at 9 l/min 0
0.4 Height of spray head (metres)
2.0
0.8
With 9 l/min regulator
(Not supplied) 33
Ø69
1.2
1.5
24.5
2.0
0
0.4 0.8 Distance from wall (metres)
1.0 0
0.4
0.5 0.4 0.3 0.2 0.1 0
Height of spray head (metres)
18.5 24.5
0.8
Unrestricted
1.2
0
5
10 15 20 Flow Rate (l/min)
25
1.6
2.0
Kohler Mira Limited Cromwell Road Cheltenham Gloucestershire GL52 5EP
18.5
1.6
Pressure Loss (bar)
115
With restrictor element only
Specification Enquiries Tel: 01242 282527 Fax: 01242 282404 Email:
[email protected] www.radacontrols.com
0.4
0 0.4 Spray width (metres)
1.2
Shower fittings
TECHNICAL SPECIFICATION Installation and Maintenance Please refer to the appropriate Product Manual.
Pressure Loss/Flow Rate (with 300R spray cartridge)
Spray Patterns at 9 l/min 0
Pressure Range Recommended minimum maintained pressure at the inlet of the fitting: 0.1 bar. Maximum maintained pressure at the inlet of the fitting: 5.0 bar. Spray Performance Minimum flow rate necessary to achieve a fully formed spray pattern: 6 litres/min. Accessories 300R Adjustable Spray Cartridge (1.0.098.87.1) With ‘Start’, ‘Active’ and ‘Relax’ modes (chrome finish). 310R Hard Water Spray Cartridge (1.0.098.88.1) Self-draining with ‘push-clean’ action (chrome finish). 400R High Performance Spray Cartridge (1.0.098.89.1) With ‘Start’, ‘Pulsate’ and ‘Champagne’ modes (white finish). Minimum pressure 0.5 bar. Requires removal of the flow regulator. Rada Riser Pipe (5.936.03.1.0) Stainless steel, 700 mm supply pipe for use with VR125 and VR145. Note! For ‘high risk’ applications the 300R, 310R and 400R spray cartridges are not recommended as the cartridges may be removed without the use of tools.
Height of spray head (metres)
1.5
1.6
2.0
1.0
0.5 0.4 0.3 0.2 0.1 0
Specification Enquiries Tel: 01242 282527, Fax: 01242 282404 Email:
[email protected] www.radacontrols.com
P5544
0.4 0.8 Distance from wall (metres)
1.2
0
0.4
0.8
Unrestricted
1.2
0
5
10 15 20 Flow Rate (l/min)
25
1.6
2.0
Pressure Loss/Flow Rate (with 310R spray cartridge)
0.4
0 0.4 Spray width (metres)
Spray Patterns at 9 l/min 0
0.4
2.0 With 9 l/min regulator
0.8
1.2
1.5
1.6
With restrictor element only
2.0
1.0
0.5 0.4 0.3 0.2 0.1 0
0
0.4 0.8 Distance from wall (metres)
0
0.4
0.8
Unrestricted
1.2
0
5
10 15 20 Flow Rate (l/min)
25
1.6
2.0
Kohler Mira Limited Cromwell Road, Cheltenham Gloucestershire, GL52 5EP
0
Height of spray head (metres)
Temperature Range Designed to accept water supplied between 5°C and 65°C.
1.2
Height of spray head (metres)
All screws in contact with water are stainless steel.
0.8
With restrictor element only
Height of spray head (metres)
Materials Spray body: Brass, polished chrome finish. Mounting bush/Inlet nipple: Brass. Spray cartridges: Engineering plastic. Flow regulator: Engineering plastic. Strainer: Stainless steel
'Relax' with 9 l/min regulator
Pressure Loss (bar)
Approvals WRAS Approved (Water Regulations Advisory Scheme) Designed, manufactured and supported in accordance with accredited BS EN ISO 9001:2000 Quality Management Systems and BS EN ISO 14001:2004 Environmental Management Systems.
0.4
2.0
Pressure Loss (bar)
Connections Push-fit socket to accept 15 mm pipework.
Rada is a registered trademark of Kohler Mira Limited. The company reserves the right to alter product specification without notice. © July 2006 Kohler Mira Limited. All rights reserved. No part of this document, or any accompanying document, may be reproduced or transmitted in any form or by any means, including photocopying or electronically, without the permission of Kohler Mira Limited.
0.4
0 0.4 Spray width (metres)
1.2
