Preview only show first 10 pages with watermark. For full document please download

Raptorjet With Gyro Rc Helicopter

   EMBED


Share

Transcript

Instruction Manual for Raptorjet with Gyro RC Helicopter HOW TO CHANGE THE HELICOPTER BATTERY Removing and prepping the batteries 1. Remove the canopy cover by pulling out the two tips holding it in place and sliding it off the front of the structure (see Fig.1). 2. Unplug the battery from the helicopter (see Fig.2). 3. The battery is fixed in place using a hook and loop band (see Fig.3). Unhook the band to remove the battery. Fig.1 Fig.2 Installing the replacement battery 1. Make sure the battery is charged following the “Charging the Helicopter” section in the helicopter’s instruction manual. 2. Fasten the replacement battery to the helicopter compartment making sure the hook and loop band is securely fastened (see Fig.3). 3. Plug the battery into the helicopter. 4. Replace the canopy cover and insert the two tips into their holders. Fig.3