Transcript
Rayne Action Cameras
@RayneCam_Offical
Raynecam_official
www.raynecam.com
User Manual Lets get Started
Included Accessories
Before You Start We know you super excited to show the world your awesome videos and photos, but please take a minute to check out some general precautions and information below.
Camera
30m Waterproof Case
RF Remote Control
2 x Batteries
Dual Battery Charger
Watch the Temp! Cameras are sensitive to extreme temperatures, both hot and cold. Be sure to keep an eye on your gear and stop use immediately if any deformity on camera or waterproof casing becomes visible.
Quick Release Buckle
Handle Bar Mount
Flat Surface Mount
Curved Surface Mount
Beware the Elements Your waterproof housing enables you to use your camera up to 30m underwater, if your camera is exposed to water without the housing attached you’re going to have a very wet, dead, useless camera on your hands, so always keep it protected!
Don’t be a “Hero” Switch Connectors
Screw
Screw Tightener
J – Hook
Don’t take it apart – Dismantling your camera will void your warranty, for any service related issues please contact your local dealer.
Play Nicely Yes our cameras are built to last, but excessive rough force may affect the camera Tripod Mount Adaptor
USB cable
Quick Start Guide
Manual
and damage internal components. Always use the waterproof housing to ensure your camera is protected!
2
*View over 80 mounts and accessories at www.raynecam.com
3
WELCOME TO RAYNE
4
6
Camera Features
7
Included Mounts and Accessories
8
Additional Mounts and Accessories
12
Menu Flow Chart
13
Software Updates
14
Camera Modes and Settings
15
Camera Settings
16
Settings Information
18
Video Settings
20
Photo Settings
22
Capturing Photos and Videos
23
Default Camera Settings
24
Wifi and RF Remote
25
SD Card Information
26
Transferring Files
27
Dash Cam Mode
27
Using Mounts and Accessories 3
Designed for Adventure
Included Mounts and Accessories
The world is changing. Everyday, what was though previously impossible is now just the beginning of a new chapter of pushing our bodies and minds to the limit.. Our goal at Rayne Cams is to help you show the world your passion, one beautiful frame at a time. 30m Waterproof housing
Camera Features
Mic
Dual battery charger
2 x Batteries
SC Card Slot
Indicator Light
Handle bar mount
Flat surface mount
Curved surface mount
Switch support
Screws
Tripod mount adaptor
J – Hook
Quick release buckle
Screw tightener
EVA box
Quick Start Guide
User Manual
Mode / Wi-Fi Button HDMI Port 170 Degree wide angle lens
6
RF Waterproof remote control
1.5” LCD
Shutter / OK Button
Power / Menu Button
USB cable
USB Port
7
Additional Mounts and Accessories
8
RYN16
RYN17
RYN18
RYN19
RYN20
2X Flat mount 3M VHB Adhesive Sticky
Helmet Curved Surface & Mount (3M Sticker)
Curved Adhesive Side Mount
Helmet Front Mount. A
Helmet Front Mount. B
RYN10
RYN65
RYN60
RYN61
RYN62
RYN63
Black Tripod Mount Adapter
Mount for Helmet, 360 degrees rotation, with lock, with 3M sticker
360 Degree Quick Buckle
Bike Aluminium Handlebar Mount 30 31.8 diameter
Model B Bike Aluminum Mount 30 31.8 Diameter
Yuntai Bicyle Clip Mount, 360 degrees, with tripod adaptor
Belt Type Fixed Bracket with tripod adaptor
RYN13
RYN14
RYN15
1x Screw and cap, long or short one for choice
Flat Mount for Tripod
2X Curved Surface 3M VHB Adhesive Sticky Mount
RYN02-1
RYN02
RYN03
RYN04
RYN05
Bodyboard Mount
Surf Mount
Flex Clamp Mount
Mount for Helmet, Motorbike Roll Bar 360 degrees rotation, Mount with lock, with 3M sticker & screws
RYN06
RYN07
RYN08
RYN09
Bicycle Handlebar / Bike Mount with Seatpost Clamp with tripod adaptor Three-way Adjustable Pivot Arm
Three-way Adjustable Pivot Arm
RYN11
RYN12
Mount for chest harness
Vertical Surface J-Hook Buckle. 2x pieces
9
Additional Mounts and Accessories
RYN46
RYN47
RYN48
RYN49
RYN50A
RYN54
RYN55
RYN56
RYN57
RYN58
Floaty sponge with 3M sticker
Replacement water housing
Replacement backdoor
Bag for accessories
Small EVA Collecting Box
USB Wall plug charger
USB Car charger
Backup portable charger
USB cable
2x Black Buckle Basic Mount
RYN50B
RYN50C
RYN51
RYN52
RYN53
RYN64
RYN67
Medium EVA Collecting Box
Large EVA Collecting Box
Anti-fog interts, 12pcs included, Reusable
RAYNE Battery
RAYNE Charger
Dive Hand Strap
Curved Hand Stabiliser
10
11
Menu Flow Chart
Firmware Updates PHOTO SETTINGS
VIDEO SETTINGS
CAMERA SETTINGS
Video Resolution
Loop Record
Record Audio
Image Size
Date Stamp
Date & Time
Language
Time Lapse
Self Timer
White Balance
Time lapse
EV
Image Rotation
Frequency
Colour
White Balance
TV Mode
Screen Auto Sleep
Beep
Format
Restore Default
Version
OSD
RF Pairing
Default Setting
1 Touch Record
Custom White Balance
Date Stamp EV
Motion Detection
WDR
FOV
G-Sensor
Custom White Balance
We are constantly improving features on our cameras. To make sure you have the latest firmware update, go to www.raynecam.com/firmware
GETTING STARTED BASICS
STEP 1
Remove camera battery slider and insert battery
STEP 2
STEP 4
Insert micro SD card
12
STEP 3
Remove camera from waterproof housing
Charge battery using provided USB cable
13
Camera Modes and Settings
Camera Settings
Turn camera ON and repeatedly press the MODE Button to scroll through camera modes.
1. To adjust camera settings, short press Power / Menu Button 2. Press Menu Button to scroll through settings and select System Settings by pressing Shutter / OK Button 3. Press Power / Menu Button to scroll through available settings. 4. To choose a setting, press Shutter / OK Button 5. Modify specific setting with pressing Shutter / OK Button 6. To go back at any time in a setting, press Wifi Button 7. Exit Setting by pressing Wifi Button
VIDEO Record video
PHOTO Capture photo
VIEW Playback footage
Quick Tip: Visit www.raynecam.com to get a full tutorial on how to setup and use your Rayne cam. 14
VIDEO Record video
15PHOTO Capture photo
SETTINGS Change settings
15
Settings Information Date / Time Setting 1.Adjust date and time for your camera. Press Menu to select time setting icon. 2.Press Capture /Shoot button to select time setting and adjust. 3.Press Wifi button to exit to previous menu.
Format Card Erase all information permanently from your memory card.
Language Change default menu language.
Default Restores factory default settings.
Invert Image Invert image 180 degrees
Version Displays current firmware version. Check for updates on www.raynecam.com/firwmware
Auto Screen Off Adjust LCD screen to stay on, or automatically power off after one or five minutes. Useful for saving battery life.
File Playback Playback all video and photo files
Auto Power Off Adjust camera auto power off options between off / 1 / 3 and 5 minutes. Light Frequency Set light frequency either 50hz or 60 hz. Check your country frequency by visiting http://tinyurl.com/pk7gvsz
16
Dash Cam Mode Activate Dash cam mode and use your Rayne Gold as a vehicle recording devise. Choosing this setting will activate 2 minute cycle recording, auto on / off when connected to 12v charger and G-Sensor to protect files in case of an accident.
Delete Files Scroll through and permanently delete video and photo files. Lock / Unlock Files Locked files cannot be deleted. Press Capture / Shoot button to Lock / Unlock files. TV Out Select to display recordings via USB or mini HDMI to any monitor. 17
Video Settings When video mode is active, you can press wifi button settings menu.
to bring up video
Resolution Choose your video quality. The higher the resolution the higher the quality. We recommend shooting on 1080p for best results. You can expect 4 hours of recording on a 32gb SD card. Cycle / Loop Video Loop recording allows you to record timed “blocks” of video (either 2 / 5 minutes long), which are saved as individual files on your SD card. Once you have used up all your memory on your SD card, the camera will overwrite the first looped block and so forth. This is useful when using the cameras as a dash cam, so that you do not need to replace your SD card every time it fills up. The built in G-Sensor will automatically lock the last recorded file to protect it against any damage. Audio Setting Allows you to set audio recording on or off. Date Setting Toggle date stamp on videos on or off. Default setting is off. 18
Time Lapse Capture breathtaking video time lapses. When activated, your camera will record one frame every 1 / 5 or 10 seconds and seamlessly stitch your video together. Timing Mode Similar to Time Lapse mode, but with larger intervals. Capture a photo every 10 / 20 / 30 or 60 seconds. White Balance Choose between Auto (AWB), cloudy, sunny, tungsten, fluorescent, blue, light blue, red and custom. Exposure Adjust exposure to make videos lighter or darker. Action Mode Select action mode to activate one-press recording. Once activated, your camera will automatically start recording once Power / menu button is pressed. G-Sensor Used mainly in Dash Cam mode, the built in G-Sensor will automatically lock the current recording if any sudden change in gravity is experienced.
19
Photo Settings When photomode is active, you can press wifi button menu.
to bring up photo settings
Resolution Select your resolution. The higher the pixel count, the better quality your images will be. Choose between 3 / 5 / 8 / 12 and 16mp.
White Balance Choose between Auto (AWB), cloudy, sunny, tungsten, fluorescent, blue, light blue, red and custom. Exposure Adjust exposure to make videos lighter or darker.
Date Label Switch to On to display data such as date and time on each picture. Time Lapse When activated, your camera will automatically take a photo based on the set time interval. Useful for time lapse photography. Available settings are off / 2s / 5s and 10 seconds. Burst Mode When activated, your camera will take 5 photos in one second. Colour Effect Choose between normal, black and white and sepia.
20
21
Default Camera Settings
Capturing Photos and Videos Press the Shutter / OK Button take a photo or start recording.
to
Press the Shutter / OK Button take a photo or stop recording.
to
View your photo / video by pressing Wifi Button
VIDEO SETTINGS Loop Record
Record Audio
Image Size
Time Lapse
Self Timer
White Balance
Custom White Balance
Date Stamp EV WDR
22
PHOTO SETTINGS
Video Resolution
Motion Detection FOV
G-Sensor
CAMERA SETTINGS
Date Stamp
Date & Time
Language
Time lapse
EV
Image Rotation
Frequency
Colour
White Balance
TV Mode
Screen Auto Sleep
Custom White Balance
Beep
Format
Restore Default
Version
OSD
RF Pairing
Default Setting
1 Touch Record
Your Rayne camera contains following default photo and video settings. To modify settings, access the settings menu by pressing Menu Button while in Video or Photo Mode
Default Photo Default Video Time Stamp Photo Mode Loop recording Wifi
16mp 1080p 30fps Off Single Photo OFF OFF
Quick Tip: You can reach out to us anytime for help and support by emailing
[email protected]
23
Pairing RF Remote
SD Card Information
Pairing Remote to Camera
Your camera is compatible with any micro SD card up to 32gb. We suggest class 10 to ensure highest quality video recording. You can expect around 4 hours of HD footage on a 32gb card.
• Turn on camera by holding in Power / Menu button for 3 – 5 seconds • Press Power / Menu button to go to System Settings and press Shutter / OK button • Scroll to RF Pairing setting by pressing Power / Menu button and press Shutter / OK button • On the remote, long press the record and picture buttons at the same time until remote page on screen goes back to the manual page
App Connection Set Up • Scan QR codes below or visit www.raynecam.com to download app. • Click Install App on phone • Turn camera on and long press Mode
button to activate wifi signal
• On your phone, go to Settings / Wifi and select network Rayne Gold • Enter password that appears on your camera screen • Open app Final Cam
IOS
24
Android
25
Transferring Files
Dash Cam Mode
We’ve included a few different options for you to play back your files. Via LCD screen Press Wifi Button until Playback mode is shown.
Your camera can also be used as an HD dash camera. You will need to purchase some additional accessories including 12v car charger and suction cup. Activate dash cam mode by going to Video settings and select Dash Cam mode. This will activate loop recording, auto record on / off and G-Sensor settings.
Final Cam App Playback and share Photos direct from your phone or tablet.
HDMI TV Video Out Connect your camera to a TV via Mini HDMI Cable (not included) to view playback on your TV.
Using Mounts and Accessories Scan the code below to see a video tutorial of all accessories, or go to www.raynecam.com/tutorials
Computer Connect your camera to any computer via included USB cable 26
27
