Transcript
RB7 - Ultra Sensitive Multiple Relay Module
RB7 MULTIPLE RELAY MODULE
ALTRONIX CORP. INP1
INP2 INP3 INP4
GND
BROOKLYN, NY 11220
INP5
INP6 INP7 GND POS+
Overview: The RB7 Multiple Relay Module incorporates seven (7) isolated form “C” relay outputs which can be activated via positive (+) low current trigger inputs. Typical applications include the switching of alarm devices (eg. annunciator, signals, etc.) from PGM outputs of alarm panels or from another source.
Specifications: • Selectable 12VDC to 24VDCoperation. • Seven (7) independent positive (+) trigger inputs (3 to 24VDC @ 2mA minimum) • Seven (7) isolated form “C” contacts rated at 1 amp @ 120VAC / 28VDC. • Snap Track compatible (order Altronix model #ST2). Board dimensions: 6.5”L x 3.25”W x 1”H
Installation Instructions: 1. 2. 3. 4.
Mount RB7 in desired location. Snap track (Altronix part #ST2) or mounting holes can be used. Connect 12 to 24VDC power supply to terminals marked [POS +] and either of the terminal marked [GND]. Connect 3 to 24VDC positive (+) trigger to each trigger inputs marked [INP1 to INP7]. Triggering input 1 (INP1) activates relay output 1 ( OUT1). Input 2 (INP2) activates relay output 2 (OUT2) etc. 5. Connect output devices to terminals marked N.C., C, N.O. dry contacts.
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice. 140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 web site: www.altronix.com, e-mail:
[email protected], Lifetime Warranty, Made in U.S.A. IIRB7 - Rev. 082799
MEMBER
