Transcript
Code 508345 Code 508346
RBG150D 6” & RBG200 8” Bench Grinders
Code 508345 RBG150
Code 508346 RBG200
AT&M: 08/01/2015
General Instruction You are welcomed for purchasing the industrial bench grinder. The quality of this machine has achieved European Standard. What’s more, to meet users’ requirement, this machine has a large number of accessories. In order to achieve better effect , we only recommend you to use the accessories of our machine. Technical Specification: Specifications
RBG150ID
RBG200ID
RBG250ID
230
230
230
50
50
50
350
450
600
2850
2850
2850
150×40×32
200×40×32
250×40×32
36/60
36/60
36/60
18
27.5
35.5
70
70
70
Rated voltage V Rated
frequency
Hz Rated input power W Rated running speed -1
min
Wheel
Size
mm d1×b×d2 Granularity（L/R） Weight Noise
kg Level
dB（A） manual, the users will be possibly The following symbols will be used in the
injured or the instrument will be
instruction manual
damaged.
If ignore the using instructions in the
It has the danger of getting an electric shock.
7. Keep the tools carefully Please keep the tools clean and in safe operation.
Safety Instruction
8. Repair or replace
the accessories
When using power tools, please observe the safety instructions for national power tool
according to eh manual
to reduce fire disaster, electric shock and
Checking the main parts frequently. A
serious personal injury. Please read this manual
part that is damaged should be repaired
carefully before using this kind of machine.
by an authorized person. Electricity Safety
General Instruction
Before connect the tool to the electric
1. Keep work area clean
power, check whether the voltage of the
Massy work area and table may cause
local electrical source is in accordance with that
accident.
marked in the label.
2. Keep work environment well Don’t use this tool in damp location or below 0℃, and keep the illume well. Don’t use the tools in the presence of flammable liquids or gases. 3. Dress properly Don’t
wear
loose
clothes
and
decorations, which may get caught in moving parts. Wear protective hair covering to contain long hair. 4. Wear safety glasses
Tool instruction This bench grinder is specially designed for burnishing or polishing
Safety glasses or dust mask are
metal knives and other metal materials,
necessary to prevent the dust and
This machine can do professional
splashing grain flying into eyes in
burnishing.
the manufacturing process.
working, it can continue unload working
5. Keep children away
After
30
minutes’load
spasmodically or turn off for cooling.
Don’t let others especially the
instructions for picture(D,E)
children under 16 years old make
1. inner flange
contact with the tool.
2. grinding wheel
6. Use the tool correctly
3. outer flange
Don’t force the miniature tool or
4. nut
accessories to do the job which should
5. outer guard of the grinding wheel
be done under the heavy tool.
6. screw
wheels is 2mm
7. long bolt
·the distance between the tool rest and
8. base
wheels is 2mm
9. big washer
If the bench grinder you bought has two
10. spring washer
different adjustable tool rests, the
11. nut
wider one should be fitted on the side of
Fitting and adjusting In order to achieve better effect, we only recommend the accessories of our machine.
the wider grinding wheel.
when
using
bench
grinder
or
replacing parts, you should observe the following instructions Generally speaking: Only use the parts or accessories in proper size Turn off the switch and cut off the electric power before replace the parts or begin other operation. Fitting the bench grinder(picture E) ·Put the bench grinder on the flat table. ·Fix the bench grinder to the table or
·Adjust the eye shield brackets to ensure they can supply the maximum protection. ·The grinding wheels should be changed if they are damaged 20% during polishing. ·When using the bench grinder for the first time, you should let it work 5 minutes under non-load condition. Grinding wheel When the distance between grinding wheel and eye shield brackets reaches 5mm, grinding wheel should be changed. “sound test” should be taken when using new grinding wheel. Knocking the grinding
wheel
away from the fitting hole. Fitting parts( picture A,B,C,F) Before using, you need to fix eye shield brackets, fit and adjust the adjustable tool rest, and fit the eye shield bracket to keep the maximum distance between parts.( picture A,B,C) ·the distance between the bracket and
produce
If you hear depressing sound, the grinding wheels can’t be
To achieve the requirements, you can short bolts, you must take the rubber mat
can
ringing sound.
proper table frame with bolts. fix with 4 proper long bolts. When using
lightly
used. Replace the grinding wheel(picture D) ·Take off the bolt(6) with turret spanner and remove the outer guard(5). ·Loosen
nut (4) with 18mm spanner, and
remove outer flange(3)and grinding wheel(2) in turn. ·Make sure that inner flange(1) is on the axes. ·Take off the old grinding wheel, and fit the new grinding wheel on the axes(make sure that the new grinding wheel is
consistent
with
that
matched
the
handle repairing machine.
machine). ·Fit outer flange（3）and nut (4).
Maintenance and Cleaning
·Screw down nut(7) with 18mm spanner.
Using the grinder under low load requires no
·Fix the outer guard(5) of the grinding
maintenance.
wheel properly with bolt (6). · According to the above, adjust eye
Clean the bench grinder regularly..
shield bracket, adjustable tool test and eye shield. When replace the flange (1) and 法兰(1(3),the diameter of the flange used should be at least 1/3 diameter of the grinding wheel, and their apertures are consistent. The swing measured from the grinding wheel circumference is normal. The axial wobble and the radial wobble within 0.5mm are normal swing.
Remove dust and dirt produced by polishing with a soft brush. Environment Protection Putting away waste grinding wheel should according to the requirements of environment protection.
Usage · Check that all the parts are well fitted or adjusted. ·Start the bench grinder. ·Let the bench grinder work at rated speed so that it can polish well. According to different results of polishing, you should choose different grinding wheels. · If necessary, you should polish working pieces with rough grinding wheels firstly, and then with fine grinding wheels. ·Before polishing, check the working piece usually to make sure that there’s no oil, grease and painting feculence to avoid being blocked up or becoming dirty ·Avoid the bench grinder over-heated. ·The working piece can only bear slight press. ·If blocked up, you can repair it with D-Mart
Picture A (RBG150ID)
Picture B (RBG200ID)
Picture C(RBG250ID)
The Axminster guarantee is available on Hobby, Trade, Industrial, Engineer, Air Tools & CNC Technology Series machines It’s probably the most comprehensive FREE guarantee ever- buy with confidence from Axminster! So sure are we of the quality, we cover all parts and labour free of charge for three years! • Look for the icon and put your trust in Axminster • No registration necessary - just keep your proof of purchase • Optional Service Plan for Industrial Series machinery
AXMINSTER
Hobby SERIES
Great value & easy-to-use, perfect for use at home
Solid, reliable machines designed for daily use
Top performers with class leading features and build quality for use in busy workshops
Quality, precision machines for the workshop or education
Small machines for the home engineer
Compressors and tools for home or workshop use; durable and great value
Precision CNC machines for industry and education
Free Three Year Guarantee on Axminster Hobby, Trade and Industrial Series woodworking and engineering machines, Axminster Air compressors and Air Tools, and bench top grinders - no registration necessary just proof of purchase.
Normal wear and tear; misuse, abuse and neglect are excluded and the machine should not have been modified in any way. Please do not attempt to service the product without first contacting us; we are happy to guide you but failure to do so may invalidate the guarantee.
We will repair or replace at our discretion and will collect only from a UK mainland address, irrespective of the original delivery address.
The Guarantee is transferable from owner to owner in the first three years but you must have original proof of purchase. Should we need to replace a machine in the first three years the guarantee will still continue to be effective from the original purchase date.
The Guarantee assumes that you have bought the correct machine for the required operation, in accordance with our guidelines; have operated and maintained it in accordance with the instruction manual; and that all cutting machines will be used with a blade which is sharp and serviceable at all times. It does not cover consumable items purchased with the original product, including original blades or abrasives.
Full Terms and Conditions can be found at axminster.co.uk/terms This guarantee does not affect your statutory rights.
For more information visit axminster.co.uk/3years
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local recycling centre and place into the appropriate recycling bin.
Only for EU countries Do not dispose of electric tools together with household waste material. In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and itsimplementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Axminster Tools & Machinery Ltd Weycroft Avenue, Axminster, Devon EX13 5PH
axminster.co.uk
