Transcript
work chairs
RBT Overview The innovative Response Back Technology™ Chair automatically responds and conforms to the back shape and size of the user.
• RBT Chairs have been designed and tested for users weighing up to 300 lbs • RBT Chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could result unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer for appropriate selection • Task Chair with Synchro-Tilt shown
Upholstered Ribs with Ebony Plastic pans on back side
Height and Width Adjustable Arms
Ebony Plastic covers on articulating spine
Polished Aluminum Frame Height and Depth Adjustable Seat
Aluminum Five Star Base
2 1/3" Nylon Casters
Statement of Line
High-Back – No Arms
High-Back – 2D T-Arms
seating price & user guide – June 19, 2017
Tension Control and Back Lock
work chairs
RBT dimensions & material requirements Dimensions WEIGHT
For Conversion to Metric, multiply dimension by 25.4. Task Chair
48 lbs
Width Between Arms 17 1/2" - 19 1/2"
Back Height from Seat 21 5/8"
Angle between Seat and Back 96.2˚ - 133.8˚
Seat Height from Floor Standard 16 1/2" - 20 1/2 High 17 1/2" - 22 1/2" Low 15" - 18"
Lumbar Apex Height 8 1/4"
Standard Overall Height 38" - 42"
Arm Height from Seat 7"-11"
Back Width 18"
Seat Depth 16" - 18 1/2" (2" - 1/2")
Seat Width 18 5/8"
Overall Depth 27"
Overall Width 27"
COM/COL Material Requirement More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching. Leather yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide. The size of the sewing pattern and the number of units ordered may also impact yield. Always round-up to the next hide. SINGLE UPHOLSTERED
High-Back
DUAL UPHOLSTERED – SEAT
DUAL UPHOLSTERED – BACK
COM [yards]
COL [sq. ft]
COM [yards]
COL [sq. ft]
COM [yards]
COL [sq. ft]
2
28
1
11
1
17
seating price & user guide – June 19, 2017
work chairs
RBT adjustment features & instructions SEAT HEIGHT ADJUSTMENT
BACK TILT ADJUSTMENT
To raise the chair, lift the lever (below the seat on the right-hand side) up while lifting your weight from the seat until you reach the desired level, then release to lock in place. To lower the chair, lift the lever up and allow your weight to push the seat down until you reach the desired level, then release to lock in place.
To adjust the angle of reclination, push the lever (below the seat on the left-hand side) up to unlock the back. Recline to the desired position and push the lever down to lock in place or leave to allow backrest to recline freely.
SEAT DEPTH ADJUSTMENT
TILT TENSION ADJUSTMENT
To adjust the seat depth, pull out the button directly below the seat on the left-hand side and simultaneously lift your weight from the seat while sliding the seat forward or backward. Release button to lock the seat in place.
Leaning back, determine if the resistance of the chair is comfortable. For less resistance, pull tension adjustment knob out and turn it counter clockwise. For greater resistance, turn the knob clockwise. When finished push tension adjustment knob back in.
2D ARM HEIGHT ADJUSTMENT
2D ARM WIDTH ADJUSTMENT
To adjust the arm height, press the button located under the armrest to raise or lower it to the desired position. Release the button to lock in place.
To adjust width of each arm, push the lever down and slide the arm to the desired position. Push the lever up to lock the arm in place.
seating price & user guide – June 19, 2017
work chairs FEATURES • Patented Response Back Technology™ provides harmoniously flexing backrest • Standard pneumatic cylinder provides height adjustment of 4" • Seat depth adjustment of 2 1/2" • Back-tilt can be locked in multiple positions or left free flow • Frame is Aluminum • Synchro-tilt 3 ratio • Tilt tension control • Hard casters are standard and are well suited for soft flooring such as carpeting • Soft casters are available for use on hard flooring, such as wood, concrete, or tile NOTES Single Upholstered: The same fabric is applied to the seat and back. Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the back and the other fabric to the seat. The first fabric listed will apply to the back and is the grade of fabric used to price the chair. A dual upholstery upcharge applies. Leather LA is only available on RBT - Synchro Tilt Task Chair.
NRBT RBT – Synchro-Tilt Task Chair
PRODUCT OPTIONS
Headrest N No Headrest
Arm Style
Upholstery Style
N No Arms W 2D Height- & Width-Adj. T-Arms (Shown)
Back Upholstery Finish
P Single Upholstered
Cylinder Style
Fabric
1 Standard
Leather
2 High
D Dual Upholstered
Seat Upholstery Finish
Frame & Base Finish C9 Polished Aluminum
Casters A Casters, Soft
3 Low
(For Dual)
Fabric
Leather
SAMPLE ORDER CODE
NRBT N
N
D
DESCRIPTION
M315
1
C9
A
PRICE
COM/ Grade 1 Grade 2 No Arms 2D Height- & Width-Adjustable T-Arms
No Arms 2D Height- & Width-Adjustable T-Arms If Dual Upholstered (D) is specified If Soft Casters (A) are specified
M309
add add
COL/ Grade 3
Grade 4
1463 1649
1486 1672
1508 1692
1530 1715
Leather LA
Leather LB
Leather LC
Leather LD
1663 1847
n/a n/a
n/a n/a
n/a n/a
Grade 5
Grade 6
Grade 7
Grade 8
Grade 9
Grade 10
1553 1738
1574 1761
1596 1781
1619 1804
1642 1827
1663 1847
177 19
seating price & user guide – June 19, 2017
work chairs FEATURES • Patented Response Back Technology™ provides harmoniously flexing backrest • Standard pneumatic cylinder provides height adjustment of 4" • Seat depth adjustment of 2 1/2" • Back-tilt can be locked in multiple positions or left free flow • Frame is Aluminum • Synchro-tilt 3 ratio • Tilt tension control • Hard casters are standard and are well suited for soft flooring such as carpeting • Soft casters are available for use on hard flooring, such as wood, concrete, or tile NOTES Single Upholstered: The same fabric is applied to the seat and back. Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the back and the other fabric to the seat. The first fabric listed will apply to the back and is the grade of fabric used to price the chair. A dual upholstery upcharge applies.
NRBTJ RBT – Synchro-Tilt Task Chair (CAL-TB133)
PRODUCT OPTIONS
Headrest N No Headrest
Arm Style
Upholstery Style
N No Arms W 2D Height- & Width-Adj. T-Arms (Shown)
P Single Upholstered
Back Upholstery Finish
Cylinder Style
Fabric
1 Standard
Leather
2 High
D Dual Upholstered
Seat Upholstery Finish
Frame & Base Finish C9 Polished Aluminum
Casters A Casters, Soft
3 Low
(For Dual)
Fabric
Leather
SAMPLE ORDER CODE
NRBT N
N
D
DESCRIPTION
M315
1636 1823
No Arms 2D Height- & Width-Adjustable T-Arms If Dual Upholstered (D) is specified If Soft Casters (A) are specified
1
C9
A
PRICE Grade 1 Grade 2
M309
add add
1658 1843
Grade 3
n/a n/a
177 19
CAL-TB133 – flammability test procedure established by the State of California for seating furniture that is used in public occupancies.
seating price & user guide – June 19, 2017
