Transcript
Slider Type
Mini Standard Controllers Integrated
Rod Type
RCL
ROBO Cylinder
RCL-SA2L Model Specification Items
RCL Series
SA2L Type
ROBO Cylinder, Slider Type, Mini Slim Type, Actuator Width 24mm, Linear Servo Motor
I
Encoder type I: Incremental specification
5
Motor type
N
48
Lead
5: Linear servo motor N : No screw 5W
Stroke
Applicable controller
48: 48mm
A1: ACON ASEL A3: AMEC ASEP MSEP
* See page Pre-47 for details on the model descriptions.
Cable length N: None P: 1m S: 3m M: 5m X: Custom Length
Relation between payload (horizontal) and acceleration
Mini
Maximum Acceleration (G)
Standard Controllers Integrated
Load Capacity (kg) Continuous operation (Duty is 100%)
0.1
0.5
Mini Standard
1
0.85
1
0.5
0.6
1.5
0.36
0.45
2
0.3
0.36
Appendix
Gripper/ Rotary Type
P.5
(1) The payload is determined by the acceleration and duty. Verify the payload in the payload (horizontal) and acceleration chart at right. Operating time The duty is x 100 per cycle. Operating time + stop time (2) The mounting position is horizontal-only. Please take care because the slider will drop down with power OFF when operating vertically. (3) Simple absolute unit cannot be used with the RCL series.
Linear Servo Type
Cleanroom Type
1
0.3
Table/ Arm/ Flat Type
Duty is 70% or less
Actuator Specifications
Lead and Payload Model number
SplashProof Type
RCL-SA2L-I-5-N-48- ➀ - ➁
Stroke and Maximum Speed Maximum payload Motor Rated output(W) Horizontal (kg) Vertical (kg) thrust (N)
5
See chart above
—
4
Instantaneous Maximum maximum acceleration (G) thrust (N)
18
Positioning repeatability (mm)
±0.1
2
Stroke (mm)
48
(Fixed)
Lead
Stroke
(no screw)
48
(mm)
460 (Unit: mm/s)
Code explanation ➀ Applicable Controller ➁ Cable length Stroke
Cable Length
Stroke (mm)
Standard price
48
—
Type Standard (Robot Cables) Special length
Pulse Motor
Cable symbol P (1m) S (3m) M (5m) X06 (6m) ~ X10 (10m) X11 (11m) ~ X15 (15m) X16 (16m) ~ X20 (20m)
Standard price — — — — — —
* The standard cable for the RCL is the robot cable. * See page A-59 for cables for maintenance.
Actuator Specifications
Servo Motor (24V)
Item
Drive System Encoder resolution Base Allowable dynamic moment (*) Overhung load length Ambient operating temperature, humidity (*) Based on 5,000km of traveling life
Servo Motor (200V)
Linear Servo Motor
421
RCL-SA2L
Description
Linear servo motor 0.042mm Material: Aluminum, white alumite treated Ma: 0.2 N·m, Mb: 0.17 N·m, Mc: 0.25 N·m 60mm or less 0 to 40oC, 85% RH or less (Non-condensing)
RCL
ROBO Cylinder
Dimensional Drawings CAD drawings can be downloaded from the website.
www.intelligentactuator.com
2D CAD
Appendix
P.15
(*1) Connect the motor-encoder integrated cable here. See page A-59 for details on cables. (*2) During home return, the slider travels until the mechanical end, so be careful to avoid interference from peripheral objects.
Slider Type
Mini Standard Controllers Integrated
40 4-M2 depth 4
Rod Type
Cable joint connector*1
16
23
16
Mini (300)
Standard
214 19 3
2
Stroke=48
18
25
1
3
Controllers Integrated
19 1
SE
Home
ME*2
Table/ Arm/ Flat Type
36
31.5
11.3
ME
Mini Ma moment offset reference position
Secure at least 100
Standard
24 30
50
50
50
ME : Mechanical end SE : Stroke end
30
Gripper/ Rotary Type
20
2
Linear Servo Type
8-M2 depth 4
Dimensions and Weight by Stroke Stroke Weight (kg)
48 0.45
Cleanroom Type
SplashProof Type
➀Applicable Controllers RCL series actuators can be operated with the controllers indicated below. Select the type according to your intended application.
Name
External view
Model number
Features
AMEC-C-5I- -2-1
Easy-to-use controller, even for beginners
ASEP-C-5I- -2-0
Simple controller operable with the same signal as a solenoid valve
Solenoid valve multi-axis type PIO specification
MSEP-C-
-~-
-2-0
Positioner type based on PIO control, allowing up to 8 axes to be connected
Solenoid valve multi-axis type Network specification
MSEP-C-
-~-
-0-0
Field network-ready positioner type, allowing up to 8 axes to be connected
Solenoid Valve Type
Positioner type
ACON-C-5I- -2-0
Safety-Compliant Positioner Type
ACON-CG-5I- -2-0
Pulse Train Input Type (Differential Line Driver)
ACON-PL-5I- -2-0
Pulse train input type with differential line driver support
Pulse Train Input Type (Open Collector)
ACON-PO-5I- -2-0
Pulse train input type with open collector support
ACON-SE-5I-N-0-0
Dedicated Serial Communication
ASEL-CS-1-5I-
-2-0
Programmed operation is possible. Can operate up to 2 axes
indicates I/O type (NP/PN). *
indicates number of axes (1 to 8). *
Serial Communication Type Program Control Type * This is for the single-axis ASEL. *
Positioning is possible for up to 512 points
Maximum number of positioning points
Input power AC100V
Power-supply Standard Reference capacity price page 2.4A rated
3 points
—
➝ P537
—
➝ P547
—
➝ P563
256 points Pulse Motor
— 512 points DC24V
1.0A rated 6.4A max.
— —
➝ P631
Servo Motor (24V)
(—) — 64 points
—
1,500 points
—
Servo Motor (200V)
➝ P675 Linear Servo Motor
indicates field network specification symbol.
RCL-SA2L
422
