Transcript
RDM P OIN T 4 DMX/RDM 4 Channel LED Driver
Coolon RDM Point 4 is the world’s most reliable DMX / RDM driver, especially designed for architectural applications. Intelligent dimming solution for a wide range of LED luminaires and applications. Designed for maximum performance in a convenient small package. Use RDM Point 4 to interface between a remote standard DMX / RDM source and up to 8Amps constant voltage RGB or RGBW LED fittings. The lights and external power supply are conveniently connected using easy plug screw terminals on the output side. Input and through RJ45 are also provided in the interface side for DMX bus connections.
COMPAC T RDM Point 4 driver is designed to suit indoor DMX / RDM controlled LED installations. A compact design allows it to be installed in the smallest of spaces.
R ELI A B LE Coolon LED drivers are designed and built to the highest standards and offer high performance, reliability and efficiency supported by our 3 years standard warranty extensive up to 5 years.
S IMPLE Connect fittings using screw terminal plugs and DMX lines through standard CAT5/6 patch leads, making on-site installations free of specialized tools. The plug type connectors simplify installation and troubleshooting.
CON V ENIEN T It will turn a wide variety of outdoor LED luminaires into a remote dimmable fitting via DMX input and PWM output. Easy to mount and highly capable, RDM Point 4 drives up to a 2Amp load per channel and 8Amps total. RDM capability allows remote addressing and monitoring of any installation.
RDM POINT 4
▪ ▪ TECHNICAL SPECIFICATIONS
Product Code
DRV-RDM-P4
Description
DMX / RDM 4 Channel LED Driver
Device Type
DMX / RDM input, open drain constant voltage output (suitable for constant voltage LED Lights)
Control Protocol
DMX512 / RDM
Solid State Output
4x MOSFET, Open drain
PWM Frequency
75 – 1950 Hz
Load/ Supply Voltage
12 – 48VDC
Power Consumption
< 1 Watt at 24V no load
Max Load Current
2 Amps per channel
Electrical Protection
±15kV ESD protection (human body model) 30kV/μs Common Mode Transient Immunity 560V PEAK Common Mode Working Voltage
Dimming Special Features
Matrix White™ Selectable Digital Processing Algorithm Digital Low Pass Filter
Enclosure
Plastic Enclosure (Fully Isolated)
IP Rating
IP40
Working Temperature
-10 to +50°C
Connectors
2 x RJ45 IEC 60603-7 8-Position Modular connectors (DMX IN and OUT), Easy Plug Screw Terminal (PSU and LEDs)
▪ ▪ APPLICATIONS
RDM Point 4 can be used to remotely drive a variety of Coolon LED luminaires, yet is also suitable for most constant voltage LED products including applications such as:
▪ ▪ COMPATIBILITY
Architectural Lighting
Ceilings
Commercial Lighting
Coves
Office
RGB and RGBW Installations
Show Rooms
Theme Park
RDM Point 4 can be used to add DMX / RDM control to the following Coolon LED luminaires, yet is also suitable for most constant voltage LED products.
Alto
Aris UG
Edge RGB
Latitude 37 RGBW
Max Mini UG
Multo
Slim
Spectrum 450
▪ ▪ FEATURES
IP40
3
YEARS
Enclosed controllers are protected
Coolon Controllers are covered
against solid objects greater than
by a solid comprehensible 3
Our products are designed and manufactured in Australia to
1mm. No Protection against liquids.
year manufacturer’s warranty.
ensure the highest standards.
[email protected] aus. 1300 287 533 intl. +613 8681 3633 www.coolon.com.au All documentation is subject to change without notice. Refer to our website for the latest information.
Version 2.2
RDM POINT 4
▪ ▪ DIMENSIONS
23mm
42mm
9mm
97mm
42mm
▪ ▪ WIRING DIAGRAM DMX+ DMX-
Mains
DMX CONTROLLER GND GND
Mains
POWER SUPPLY 24 ~ 48VDC
Black (GND)
Maximum 3m from Power Supply to RDM Point
Red (+VDC)
OUTPUT TO LUMINAIRE
PWR INPUT
Black Red Green Blue White
RGBW LED LUMINAIRE
Maximum 2A per Channel
GND PWR IN + + COMMON CH1
– RED
CH2
– GREEN
CH3
– BLUE
CH4
– WHITE
RDM POINT 4 PWM DMX DRIVER RDM COMPATIBLE Voltage Input Range Maximum Load Comm Protocol PWM Freq. Range
12 - 48VDC 2 Amps per Ch DMX512 w/ RDM 75-1950Hz
Addresses and performance parameters
12 3 4 5 6 7 8
ESTA E1.11-2004 PINOUT 1 - DMX+ 2 - DMX7 - COM 8 - COM
ESTA E1.11-2004 DMX OUT
ESTA E1.11-2004 DMX IN
www.coolon.com.au
RGBW LED LUMINAIRE
RGBW LED LUMINAIRE Typical CAT5 / CAT6 outdoor circular cable
Maximum 10m from RDM Point to LED strip
Maximum 400m
12 3 4 5 6 7 8
Mains
POWER SUPPLY 24 ~ 48VDC
Black (GND)
1 - DMX+ 2 - DMX7 - GND 8 - GND
Maximum 3m from Power Supply to RDM Point
Red (+VDC)
OUTPUT TO LUMINAIRE
PWR INPUT
Black Red Green Blue White
RGBW LED LUMINAIRE
Maximum 2A per Channel
ESTA E1.11-2004 PINOUT
GND PWR IN + + COMMON CH1
– RED
CH2
– GREEN
CH3
– BLUE
CH4
– WHITE
RDM POINT 4 PWM DMX DRIVER RDM COMPATIBLE Voltage Input Range Maximum Load Comm Protocol PWM Freq. Range
12 - 48VDC 2 Amps per Ch DMX512 w/ RDM 75-1950Hz
Addresses and performance parameters
12 3 4 5 6 7 8
ESTA E1.11-2004 PINOUT 1 - DMX+ 2 - DMX7 - COM 8 - COM
ESTA E1.11-2004 DMX OUT
ESTA E1.11-2004 DMX IN
www.coolon.com.au
RGBW LED LUMINAIRE
RGBW LED LUMINAIRE Maximum 10m from RDM Point to LED strip
[email protected] aus. 1300 287 533 intl. +613 8681 3633 www.coolon.com.au All documentation is subject to change without notice. Refer to our website for the latest information.
Version 2.2
