Transcript
Connecting an S video cord or a component video cord or an HDMI cord Television
Select a connection To enjoy DVD playback, select connection A. In addition, if you want to record TV programs from a connected tuner, make additional connections by referring to connection B.
: Hookup for Playback
RDR-GX355
to COMPONENT VIDEO IN
You will need:
to HDMI IN
X1
to S VIDEO IN
INPUT VIDEO IN COMPONENT S VIDEO Y PR PB
HDMI IN
DVD Recorder
(one audio/video cord is supplied) c
to COMPONENT VIDEO OUT
a b
Television COMPONENT OUT AUDIO OUT VIDEO
Follow the three steps below to connect, setup and make recordings on your DVD recorder.
VIDEO
LINE OUT VIDEO
L PB
R
R
HDMI OUT
PR AUDIO
PR
COAXIAL OPTICAL OUT DIGITAL AUDIO
DVD Recorder
LINE 1 IN
Y
L
SETTOP BOX CONTROL
S VIDEO OUT
AUDIO
to S VIDEO OUT
to HDMI OUT
to LINE IN
Connect one of the following cords (not supplied) instead of the video cord. (One audio/video cord supplied.)You will enjoy high quality images.
LINE IN
a S video cord or b Component video cords or c HDMI cord
to LINE OUT to an AC outlet
LINE OUT LINE 1 IN ENT S VIDEO OUT COMPONOUT VIDEO O VIDEO AUDIO OUT VIDE
L PB
R
R
HDMI OUT
SETTOP BOX CONTROL
PR COAXIAL OPTICAL IO OUT DIGITAL AUD
©2007 Sony Corporation
1
Y
L
AUDIO
PR
For further explanations, see “Video Settings (Video)” in the Operating Instructions.
Connecting an AV amplifier (receiver)
AUDIO
2
3-096-495-11(1)
DVD Recorder
Connect power cords last!
to DIGITAL AUDIO OUT (COAXIAL or OPTICAL)
AK68-01356A
Printed in China
AUDIO OUT L/R
COMPONENT OUT AUDIO OUT VIDEO
to HDMI OUT SETTOP BOX CONTROL
L
L
R
R
LINE 1 IN
S VIDEO OUT
VIDEO
LINE OUT VIDEO
Y L PB R
HDMI OUT
PR AUDIO
AUDIO
COAXIAL OPTICAL OUT DIGITAL AUDIO
to DIGITAL IN (OPTICAL)
: Hookup for Playback and Recording
You have :
X2
to LINE IN (AUDIO)
Television Connecting to an AV amplifier (receiver) with digital cords will enable you to listen to Dolby Digital or DTS surround effects. For further explanations, see “Connecting to Your AV Amplifier (Receiver)” in the Operating Instructions.
to an AC outlet to VIDEO OUT/ AUDIO OUT
to CABLE IN
VIDEO OUT
OUT TO TV
CAVLE IN
to your antenna wall jack
OUT COMPONENT
4 2
L
R
SETTOP BOX CONTROL
LINE 1 IN VIDEO
IN
Cable Box/ Satellite Receiver
to LINE OUT to an AC outlet
LINE OUT VIDEO
VIDEO OUT
Y
CAVLE IN
L
3
PB
PR COAXIAL OPTICAL IO OUT DIGITAL AUD
to LINE IN LINE IN
R
HDMI OUT
to VHF/UHF IN
VHF/UHF
ENT S VIDEO OUT COMPONOUT O AUDIO OUT VIDE
Please contact your cable service to ask cable box with video/ audio output.
for Place it so that the tip of the controller is near the remote control reception window on your set top box.
S VIDEO
to LINE 1 IN
Cable With No Cable Box
Connecting the Set Top Box controller
DIGITAL AUDIO OUT
to OUT TO TV
Please contact your cable service or satellite service company to ask cable box or satellite receiver with video/audio output.
hint
to DIGITAL IN (COAXIAL)
a audio cords or b coaxial digital cord or c optical digital cord or d HDMI cord
If you have neither of the above tuners :
For any inquiry, please visit the Sony web site : http://esupport.sony.com/
(one antenna cable is supplied)
Cable Box / Satellite Receiver
OPTICAL
and to get a cable box or satellite receiver with video/audio output.
AV Amplifier
Connect one of the following cords (not supplied).
ANT IN
You need to subscribe to a cable TV or satellite TV service
X2
(one audio/video cord is supplied)
hint
Antenna Only (No Cable TV/No Satellite Receiver)
b LINE IN
If you have been using your VCR connected to an antenna, connect this DVD recorder to the VCR using an audio/video cord. This way, you can record TV programs.
Cable Box/Satellite Receiver Without Video/Audio Output
to HDMI IN HDMI IN
Cable Box With Video/Audio Output See right – or – Satellite Receiver With Video/Audio Output
You have :
c
IN DIGITAL
d
You will need:
Before hookup This DVD recorder does not include a tuner. To record TV programs on the DVD recorder from a connected device, you need to connect the DVD recorder to a tuner that has audio/video output jacks.
a
PR
AUDIO
AUDIO
OUT
DIGITAL AUDIO OUT
ANT IN OPTICAL
S VIDEO
DVD Recorder S VIDEO OUT COMPONENT OUT AUDIO OUT VIDEO
DVD Recorder
L
R
1
OUT TO TV
COMPONENT
4
Connect all power cords last!
SETTOP BOX CONTROL
to SET TOP BOX CONTROL
LINE 1 IN VIDEO
LINE OUT VIDEO
Y L PB
R
HDMI OUT
PR COAXIAL OPTICAL OUT DIGITAL AUDIO
PR
AUDIO
AUDIO
You can have the recorder control channels on the cable box or satellite receiver for timer recording. Connect the Set Top Box controller (supplied), and select “Yes” in step 6 of Setup on the next page.
The Easy Setup display automatically appears on your TV screen when you turn on your recorder for the first time. Follow the steps below to make the minimum number of basic adjustments to use the recorder. If you make a mistake, press RETURN.
Turn on your TV and any other 1 connected equipment such as
Press M/m to select whether or 6 not you want to use the Set Top
your cable box or satellite receiver.
Easy Setup
Box control function, then press ENTER.
2 Switch the input selector on 3 your TV so that the signal from
Do you want to control your set top box with this recorder? (Changes to the current setting will erase all timer settings.)
Press I/1 on the DVD recorder.
the recorder appears on your TV screen. Easy Setup
Initial setting necessary to operate the DVD recorder will be made. You can change them later using setup.
Yes No
Label side facing up Move
7
ENTER Enter
Return
YES Press the number buttons to enter the brand code of your cable box or satellite receiver. Then select “OK” and press ENTER.
NO
Easy Setup
Examples of Brand Codes
Enter the brand code of your set top box.
Cancel
OK
SYSTEM MENU
Return
Exit
Some examples of brand codes are shown on the right.
Start
ENTER Enter
SYSTEM MENU
Exit
If “Initial setting necessary to operate the DVD recorder will be made. You can change them later using setup.” does not appear on your TV screen, select “Easy Setup” from “Setup” in the System Menu.
4 Press M/m to select a language for 5 the on-screen display, then press Press ENTER.
Move
8
Press M/m to select the cable box/satellite receiver output channel, then press ENTER.
ENTER Enter
Return
SYSTEM MENU
Exit
Sony
1006
Scientific Atlanta
0008,0277,0017,00 06,0237,0025,0477, 0207,0877,0003,00 12,0000,0021,1877
Select the input line that you connected the set top box to.
If you connected your cable box or satellite receiver to the DVD recorder’s audio/video input, select the “Line” number you connected to.
Motorola
Line1 Line2
Move
ENTER Enter
Return
SYSTEM MENU
Exit
9
Select the screen language.
English Français Español
ENTER Enter
SYSTEM MENU
Return
Press M/m to set the month and press ,. Set the day, year, hour, minutes, and AM/PM in the same way. Then press ENTER.
Easy Setup
Set the time and date manually.
10
/ (on/standby)
1
2
4
0237
Samsung
0040,0144,0023,00 03,0070,0000 0476,0011,0014,00 98,0810,0024,0003, 0015,0276
7
8
6 9
0
Year
01
2007
Hour
Min
AM/PM
Mon
Return
SYSTEM MENU
Easy Setup
Press OPEN/CLOSE and 2 place a recordable DVD on the
Wait until “LOAD” disappears from the front panel display. See “Quick Guide to Disc Types” in the Operating Instructions for more details about the differences between disc types.
disc tray.
4 : 3 Pan Scan
ENTER Enter
Return
Easy Setup
SYSTEM MENU
ENTER Enter
Return
Easy Setup
SYSTEM MENU
10:10 AM
Turn on the recorder and 1 the cable box/satellite receiver. Point the remote at the 2 recorder (not at the cable
On Off
box/satellite receiver). ENTER Enter
Return
Easy Setup
SYSTEM MENU
Exit
10:10 AM
Finish
ENTER Enter
Return
3
Press CH+/− and confirm that the channel changes on the cable box/satellite receiver window.
If the recorder does not control your cable box or satellite receiver, see “If you cannot get the recorder to control your cable box/satellite receiver” at the end of “Step 7: Easy Setup” in the Operating Instructions.
Easy Setup is finished.
Move
5
6
7
8
9
ANGLE TOP MENU
SET
0 MENU
INPUT
TIME/TEXT
AUDIO SUBTITLE
SYSTEM MENU
Exit
1 Press TITLE LIST.
The Title List menu appears. Title List(Original)
TITLE LIST
10:10 AM
No. Title
1/4
TIMER ORIGINAL/ PLAYLIST
Length Edit
01 LINE 1
01:29:03 >
02 LINE 1
00:31:23 >
03 LINE 1
01:59:00 >
04 LINE 1
00:58:56 >
RETURN OPTIONS PREV REPLAY ADVANCE NEXT
2
Select a channel.
Press REC MODE repeatedly to select the recording mode.
HQ, HSP, SP, LSP, ESP, LP, EP, or SLP HQ offers the best quality picture, but with the shortest recording time. Recording time increases with each successive mode, but the picture quality gradually deteriorates.
3
Press REC.
The recorder starts recording. To stop recording, press STOP.
Record a TV Program using Timer
1 Press TIMER.
Press M/m to set Date, Start 2 and End time, Channel or Input source and Rec Mode.
The Timer menu appears. Timer - Standard No. Rec To No.01
Data
10:10 AM
Start
End
Source
Mode
01
DVD 04/15 09:00PM 10:00PM CH8
02
DVD 09:15PMEnd09:45PMChCH11Mode Date04/30Start
03 04
--- Today --/-- 09 : 00--:-PM ----/---:--
05
---
--/--
06
---
--/--
Adjust
10
:
--:--
00 PM
---
Line 1
---
SP
--:--
---
---
--:--
--:--
---
---
--:--
--:--
---
---
Move
Return
Edit
SYSTEM MENU
As for selecting “Ch(channel)”, see above “Record a TV program.” The way to select “Ch(channel)” may differ in the case of a Set Top Box controller.
3 Press ENTER. Exit
Leave the cable box/satellite receiver turned on and do not change its selected channel until the recorder finishes the timer recording.
ENTER Enter
Move
ENTER
Exit
DTS
When “Finish” appears, press ENTER to complete Easy Setup.
4
Playback the Recorded DVD Disc
May/02/2007 08:00 PM
Test your Set Top Box controller
Dolby Digital
Move
3
LINE 1
10:10 AM
D-PCM
If your AV amplifier has a DTS decoder, select “On.” If not, select “Off.”
2
DISPLAY
• When not using a Set Top Box controller. Press INPUT to select input source until “LINE 1” appears in the front panel display. Then select a channel on the connected cable box or satellite receiver.
Exit
Dolby Digital
Press / to select the type of DTS signal you want to send to your AV amplifier (receiver), then press ENTER.
1
SYSTEM MENU
4 : 3 Letter Box
If you connected a Set Top Box controller, do the following:
13
OPEN/CLOSE again 3 toPress close the disc tray.
• When using a Set Top Box controller Press CH+/− buttons to select the cable box or satellite receiver’s channel.
10:10 AM
16 : 9
Move
Press ENTER to make a selection
Press DVD to operate the DVD 1 recorder.
Record a TV Program
Select your TV screen type.
Press / to select the type of Dolby Digital signal you want to send to your AV amplifier (receiver), then press ENTER.
CH/ TRACKING
For brand codes other than the above, see the “Cable Box/Satellite Receiver Brand Code” list of the Operating Instructions (page 100).
Exit
ENTE R
///ENTER
Insert a DVD Disc
AM
ENTER Enter
If your AV amplifier (receiver) has a Dolby Digital decoder, select “Dolby Digital.” If not, select “D-PCM.”
12
OPEN/ CLOSE
1
Press M/m to select the type of TV you have, then press ENTER.
Move
3
5
Day
01
If you have a wide-screen TV, select “16:9.” If you have a standard TV, select either “4:3 Letter Box”(shrink to fit) or “4:3 Pan Scan” (stretch to fit). This will determine how "widescreen" images are displayed on your TV.
11 SYSTEM MENU
Month
12 : 00
Exit Move
Number buttons
12:00 AM
0476,0276,1476,08 10,1376,1254,0400, 1106
Pace
General Instruments
Easy Setup
RETURN
Code number
Easy Setup
ENTER.
Move
Cable box brand
Return
The sub-menu appears. 10:10 AM
No. Title
1/4
Length Edit
01 LINE 1 CLEAR
PAUSE
REC
STOP
SYNCHRO REC REC MODE
02 LINE 1
01:29:03 > Play 00:31:23 Title Erase>
03 LINE 1
01:59:00 > Chapter Erase
04 LINE 1
00:58:56 > Protect Title Name
LINE 1
VOL
TV
Move
DIGITAL/ ANALOG
A-B Erase
May/02/2007 08:00 PM
CH
INPUT
Exit
Press / to select the title you 2 want to play and press ENTER.
Title List (Original)
PLAY
SYSTEM MENU
Divide Title ENTER Enter
Return
SYSTEM MENU
Exit
Press / to select “Play” and 3 press ENTER. Playback starts from the beginning of the title.
