Transcript
Connecting an S video cord or a component video cord or an HDMI cord
Select a connection
Television
To enjoy DVD/VCR playback, select connection A. In addition, if you want to record TV programs from a connected tuner, make additional connections by referring to connection B.
: Hookup for Playback
RDR-VX555
to COMPONENT VIDEO IN
You will need:
to HDMI IN
X1
to S VIDEO IN
INPUT VIDEO IN COMPONENT S VIDEO Y PR PB
HDMI IN
(one audio/video cord is supplied)
VCR-DVD Recorder
c
to COMPONENT VIDEO OUT
b
Television S VIDEO OUT COMPONENT OUT AUDIO OUT VIDEO
Follow the three steps below to connect, setup and make recordings on your VCR-DVD recorder.
VIDEO
to an AC outlet
PB R
HDMI OUT
PR
BOX CONTROL COAXIAL OPTICAL IO OUT DIGITAL AUD
AUDIO
PR
PR
AUDIO
to S VIDEO OUT
For further explanations, see “Video Settings (Video)” in the Operating Instructions.
1
AUDIO
Connecting an AV amplifier (receiver)
2 3-096-491-11(1)
Connect power cords last!
to DIGITAL AUDIO OUT (COAXIAL or OPTICAL)
AK68-01352A
Printed in China
AUDIO
a S video cord or b Component video cords or c HDMI cord
LINE OUT
L
R
©2007 Sony Corporation
L
PR
Connect one of the following cords (not supplied) instead of the video cord. (One audio/video cord supplied.) You will enjoy high quality images.
LINE IN
Y
L
SETTOP
VIDEO
VIDEO
to HDMI OUT
to LINE IN
LINE 1 IN
LINE OUT
R
HDMI OUT COAXIAL OPTICAL OUT DIGITAL AUDIO
to LINE OUT
VIDEO
PB
R
VCR-DVD Recorder
LINE 1 IN
Y
L
SETTOP BOX CONTROL
ENT S VIDEO OUT COMPONOUT O AUDIO OUT VIDE
a
AUDIO OUT L/R
COMPONENT OUT AUDIO OUT VIDEO
to HDMI OUT
L
R
SETTOP BOX CONTROL
L
R
S VIDEO OUT
LINE 1 IN VIDEO
LINE OUT VIDEO
VCR-DVD Recorder
Y L PB R
HDMI OUT
PR AUDIO
AUDIO
COAXIAL OPTICAL OUT DIGITAL AUDIO
to DIGITAL IN (OPTICAL)
c
IN DIGITAL
: Hookup for Playback and Recording
You will need:
You have :
X2
X2 (one antenna cable is supplied)
(one audio/video cord is supplied)
AV Amplifier
to DIGITAL IN (COAXIAL)
to LINE IN (AUDIO)
Connect one of the following cords (not supplied).
Cable Box / Satellite Receiver
a audio cords or b coaxial digital cord or c optical digital cord or d HDMI cord
Television to an AC outlet
hint
VIDEO OUT
CAVLE IN
OUT TO TV
If you have neither of the above tuners :
OUT COMPONENT
Connecting the Set Top Box controller
4
for Place it so that the tip of the controller is near the remote control reception window on your set top box.
DIGITAL AUDIO OUT
ANT IN OPTICAL
to your antenna wall jack
Connecting to an AV amplifier (receiver) with digital cords will enable you to listen to Dolby Digital or DTS surround effects. For further explanations, see “Connecting to Your AV Amplifier (Receiver)” in the Operating Instructions.
to VIDEO OUT/ AUDIO OUT
to CABLE IN
If you have been using your VCR connected to an antenna, connect this DVD-VCR to the VCR using an audio/video cord. This way, you can record TV programs.
Cable Box/Satellite Receiver Without Video/Audio Output
a LINE IN
Cable Box With Video/Audio Output See right – or – Satellite Receiver With Video/Audio Output
You have :
b
to HDMI IN HDMI IN
Before hookup This DVD-VCR does not include a tuner. To record TV programs on the DVD-VCR from a connected device, you need to connect the DVD-VCR to a tuner that has audio/video output jacks.
d
S VIDEO
to VHF/UHF IN
2 to OUT TO TV
LINE IN
to LINE 1 IN
Please contact your cable service or satellite service company to ask cable box or satellite receiver with video/audio output.
to LINE IN
to LINE OUT
VHF/UHF
IN
Cable Box/ Satellite Receiver
LINE OUT LINE 1 IN ENT S VIDEO OUT COMPONOUT VIDEO O VIDEO AUDIO OUT VIDE
L
Y L VIDEO OUT
R
Cable With No Cable Box
SETTOP
to an AC outlet
R
HDMI OUT
PR
BOX CONTROL
Please contact your cable service to ask cable box with video/ audio output.
COAXIAL OPTICAL IO OUT DIGITAL AUD
PR
AUDIO
AUDIO
3
CAVLE IN
and to get a cable box or satellite receiver with video/audio output. hint For any inquiry, please visit the Sony web site : http://esupport.sony.com/
OUT
OUT TO TV
DIGITAL AUDIO OUT
ANT IN OPTICAL
S VIDEO
S VIDEO OUT COMPONENT OUT AUDIO OUT VIDEO
Antenna Only (No Cable TV/No Satellite Receiver)
You need to subscribe to a cable TV or satellite TV service
COMPONENT
PB
L
R
SETTOP BOX CONTROL
VCR-DVD Recorder
1
4
Connect all power cords last!
LINE 1 IN VIDEO
LINE OUT VIDEO
Y L
VCR-DVD Recorder
PB
R
HDMI OUT
PR COAXIAL OPTICAL OUT DIGITAL AUDIO
PR
AUDIO
AUDIO
to SET TOP BOX CONTROL
You can have the recorder control channels on the cable box or satellite receiver for timer recording. Connect the Set Top Box controller (supplied), and select “Yes” in step 6 of Setup on the next page.
The Easy Setup display automatically appears on your TV screen when you turn on your recorder for the first time. Follow the steps below to make the minimum number of basic adjustments to use the recorder. If you make a mistake, press RETURN.
Turn on your TV and any other 1 connected equipment such as
Press M/m to select whether or 6 not you want to use the Set Top
your cable box or satellite receiver.
Easy Setup
Box control function, then press ENTER.
Do you want to control your set top box with this recorder? (Changes to the current setting will erase all timer settings.)
Press I/1 on the VCR-DVD 2 recorder.
3
Switch the input selector on your TV so that the signal from the recorder appears on your TV screen.
Yes
Move
7
ENTER Enter
Return
SYSTEM MENU
Exit
YES Press the number buttons to enter the brand code of your cable box or satellite receiver. Then select “OK” and press ENTER.
NO
Easy Setup
Examples of Brand Codes
Enter the brand code of your set top box.
Some examples of brand codes are shown on the right.
Start Cancel
OK
Move
ENTER Enter
SYSTEM MENU
Return
4 Press M/m to select a language for 5 the on-screen display, then press Press ENTER.
ENTER Enter
Return
SYSTEM MENU
Exit
8
Press M/m to select the cable box/satellite receiver output channel, then press ENTER.
Select the screen language.
If you connected your cable box or satellite receiver to the VCR-DVD recorder’s audio/ video input, select the “Line” number you connected to.
Français Español
Move
ENTER Enter
Return
SYSTEM MENU
Exit
Easy Setup
12:00 AM
Set the time and date manually. Month
Day
Year
01
01
2007
Hour
Min
AM/PM
Exit Move
/ (on/standby)
1
2
4
5
7
8
6 9
0
RETURN
SYSTEM MENU
Press M/m to select the type of TV you have, then press ENTER.
Easy Setup
7
8
9
1
0237
Samsung
0040,0144,0023,00 03,0070,0000 0476,0011,0014,00 98,0810,0024,0003, 0015,0276
For brand codes other than the above, see the “Cable Box/Satellite Receiver Brand Code” list of the Operating Instructions (page 121).
2
• When using a Set Top Box controller Press CH+/- buttons to select the cable box or satellite receiver’s channel. • When not using a Set Top Box controller. Press INPUT to select input source until “LINE 1” appears in the front panel display. Then select a channel on the connected cable box or satellite receiver.
SYSTEM MENU
3
Press REC MODE repeatedly to select the recording mode.
When recording to a DVD disc: HQ, HSP, SP, LSP, ESP, LP, EP, or SLP HQ offers the best quality picture, but with the shortest recording time. Recording time increases with each successive mode, but the picture quality gradually deteriorates. When recording to a VHS tape: SP or EP EP (Extended Play) provides recording time three times as long as SP (Standard Play). However, SP produces better picture and audio quality.
4
SET
0 MENU
Press DVD to operate the DVD 1 recorder.
INPUT
TIME/TEXT
2 Press TITLE LIST.
AUDIO SUBTITLE
TITLE LIST
The Title List menu appears.
TIMER
Title List(Original)
ORIGINAL/ PLAYLIST
DISPLAY
ENTER
SYSTEM MENU
CLEAR
PAUSE
Test your Set Top Box controller
Dolby Digital
D-PCM Dolby Digital
Press / to select the type of DTS signal you want to send to your AV amplifier (receiver), then press ENTER.
Easy Setup
SYSTEM MENU
Exit
10:10 AM
1
Turn on the recorder and the cable box/satellite receiver.
2
Point the remote at the recorder (not at the cable box/satellite receiver).
DTS
Off
Move
When “Finish” appears, press ENTER to complete Easy Setup.
ENTER Enter
Return
Easy Setup
SYSTEM MENU
Exit
10:10 AM
Finish
ENTER Enter
Return
Press CH+/- and confirm 3 that the channel changes on the cable box/satellite receiver window. If the recorder does not control your cable box or satellite receiver, see “If you cannot get the recorder to control your cable box/satellite receiver” at the end of “Step 7: Easy Setup” in the Operating Instructions.
Easy Setup is finished.
Move
Return
Title List (Original)
REC
SYNCHRO REC REC MODE
VOL
Press REC.
Exit
Length Edit
01 LINE 1
TV
SYSTEM MENU
10:10 AM
No. Title
1/4
CH
DIGITAL/ ANALOG
02 LINE 1
01:29:03 > Play 00:31:23 Title Erase>
03 LINE 1
01:59:00 > Chapter Erase
04 LINE 1
00:58:56 > Protect Title Name
LINE 1
INPUT
A-B Erase
May/02/2007 08:00 PM Move
Divide Title ENTER Enter
Return
SYSTEM MENU
Exit
Playback starts from the beginning of the title.
Playback the Recorded VHS Tape
Input source and Rec Mode.
Timer - Standard No. Rec To No.01
01
Data
Start
10:10 AM End
Source
Mode
Edit
DVD 04/15 09:00PM 10:00PM CH8
02Media DVD Date 04/30 Start 09:15PM End 09:45PM CH11 Ch Mode 03 DVD--- Today --/-- 09 --:---:------SP : 00 PM 10 : 00 PM Line 1 04
---
--/--
--:--
--:--
---
---
05
---
--/--
--:--
--:--
---
---
06
---
--/--
--:--
--:--
---
Adjust
Move
Return
--SYSTEM MENU
Exit
1 Press VIDEO to operate the VCR. Press / to find the point 2 you want to start playback.
As for selecting “Ch(channel)”, see above “Record a TV program.” The way to select “Ch(channel)” may differ in the case of a Set Top Box controller.
3 Press ENTER.
For further explanations, see “VCR Playback” in the Operating Instructions.
Leave the cable box/satellite receiver turned on and do not change its selected channel until the recorder finishes the timer recording.
3 Press PLAY. Playback starts.
ONE-TOUCH DUBBING On
If your AV amplifier has a DTS decoder, select “On.” If not, select “Off.”
00:58:56 >
The sub-menu appears.
STOP
Press M/m to set Media, Date, 2 Start and End time, Channel or
The Timer menu appears.
Return
01:59:00 >
04 LINE 1
Press / to select the title you 3 want to play and press ENTER.
PLAY
Exit
10:10 AM
ENTER Enter
00:31:23 >
03 LINE 1
Press / to select “Play” and 4 press ENTER.
1 Press TIMER. Easy Setup
01:29:03 >
02 LINE 1
ENTER Enter
Move
RETURN OPTIONS PREV REPLAY ADVANCE NEXT
Record a TV Program using Timer
Press / to select the type of Dolby Digital signal you want to send to your AV amplifier (receiver), then press ENTER.
01 LINE 1
May/02/2007 08:00 PM
4 : 3 Pan Scan
Return
Length Edit
LINE 1
4 : 3 Letter Box
ENTER Enter
10:10 AM
No. Title
1/4
10:10 AM
If you connected a Set Top Box controller, do the following:
13
6
0476,0276,1476,08 10,1376,1254,0400, 1106
Exit
ENTE R
Press ENTER to make a selection
5
16 : 9
Move
///ENTER
4
Record a TV Program
Pace
Playback the Recorded DVD Disc
Select your TV screen type.
If your AV amplifier (receiver) has a Dolby Digital decoder, select “Dolby Digital.” If not, select “D-PCM.”
12
3
TOP MENU
The recorder starts recording. To stop recording, press STOP.
Move
3
Return
2
0008,0277,0017,00 06,0237,0025,0477, 0207,0877,0003,00 12,0000,0021,1877
AM
ENTER Enter
If you have a wide-screen TV, select “16:9.” If you have a standard TV, select either “4:3 Letter Box”(shrink to fit) or “4:3 Pan Scan” (stretch to fit). This will determine how "widescreen" images are displayed on your TV.
11
Mon
1
Scientific Atlanta
Press DVD to record to a DVD disc. Or, press VIDEO to record to a VHS tape. Select a channel.
VIDEO CH/ TRACKING
ANGLE
General Instruments
10
SYSTEM MENU
DVD
Wait until “LOAD” disappears from the front panel display. See “Quick Guide to Disc Types” in the Operating Instructions for more details about the differences between disc types.
1006
Line2
12 : 00
Number buttons
OPEN/ CLOSE
Sony
Motorola
Line1
Set the day, year, hour, minutes, and AM/PM in the same way. Then press ENTER.
English
Return
3
disc tray. Press OPEN/CLOSE again to close the disc tray.
Code number
Select the input line that you connected the set top box to.
Press M/m to set the month and 9 press ,.
Easy Setup
ENTER Enter
Press VIDEO to operate the 1 VCR. a tape with its safety tab 2 inInsert place.
Label side facing up
Cable box brand
Easy Setup
ENTER.
Move
Press DVD to operate the DVD 1 recorder. Press OPEN/CLOSE and 2 place a recordable DVD on the
Exit
If “Initial setting necessary to operate the DVD recorder will be made. You can change them later using setup.” does not appear on your TV screen, select “Easy Setup” from “Setup” in the System Menu.
SYSTEM MENU
Insert a VHS Tape
No
Easy Setup
Initial setting necessary to operate the DVD recorder will be made. You can change them later using setup.
Insert a DVD Disc
SYSTEM MENU
Exit
VIDEO
Dub From VHS Tape to DVD
From DVD to VHS Tape
1 Insert a recordable disc. 2 Insert a source tape. Cue the tape at the start 3 point, and press < VIDEO.
1 Insert a recordable tape. 2 Insert a source disc. Select a title on the disc, 3 and press DVD ,.
DVD
Before dubbing, select the recording mode and make the necessary audio settings. For details, see the dubbing section in the Operating Instructions.
