Transcript
Color Camera CF 15 MX / CF 15 DSP / CF 15 RGB
Extremely high sensitivity < 0.25 Lux Fast AGC and AIT response Signal-to-noise ratio > 50 dB Digital edge enhancement Manual white-set selectable Whole field or spot measuring Horizontal image mirror Serial control via RS 232 interface Line generator for two reticles (LG)
Original view under steam Clear up with DRE
Dynamic Range Enhancement (DRE) Practical one-cable connection (camera / frame grabber) Optional RGB-Version Optional control for lenses with motor iris
Dynamic Range Enhancement (DRE) for extreme environmental conditions The color camera CF 15 DSP meets highest standards for optical and microscopic visualization tasks. The excellent signal-to-noise ratio assures supreme contrasts in the image. Images of highest resolution and color quality are delivered with a high sensitivity at the same time. The CF 15 DSP comes with selectable edge enhancement for a better display of critical details. The automatic control of gain and integration (AGC and AIT) can be switched off separately in the range from 1/50 s to 1/100 000 s. You can choose between a whole field and spot measuring window. The white set is adjusted automatically or manually.
The CF 15 DSP features an RS 232interface. With the detailed interface description it is possible to program camera functions for user-specific needs and to control them via the serial interface. The camera is available as a basic version with the operation modes “serial” and “manual”. It comes with all standard features and with the new “horizontal image mirror” function. This version offers all standard features, more discrete fine adjustments and the new function “horizontal image mirror”. The version CF 15 MX comes equipped with two additional modules. With the LG module (line generator) you can directly adjust two reticles. The DRE module (Dynamic Range Enhancement) realizes individual adjustments for the dynamic contrast adaptation (measuring window, offset, gain) on the live image. Optional serial control via RS 232 interface
realize visions.
CF 15 MX and CF 15 DSP - CF 15 RGB Technical Data Sensor Type:
1/2” interline-transfer-CCD with complementary color filter*
Video norm:
CCIR/PAL
Area:
6.45 x 4.8 [mm], 752 x 582 pixel
EIA/NTSC 6.45 x 4.8 [mm], 768 x 494 pixel
Signal Processing System:
10 bit digital signal processing
Signal / noise ratio:
> 50 dB (measured in a dark image at 20 ms integration and 0 dB gain)
Sensitivity:
< 0.25 lx (at 20 ms integration, 14 dB gain, 50 % video level)
Resolution:
480 lines (horizontal)
Signal output:
Y/C (S-VHS), composite video, optional RGB output Functions**
Integration:
1/50 s to 1/100 000 s automatic (AIT). 1/50 s fixed
1/60 s to 1/100 000 s automatic (AIT) 1/60 s fixed
Gain:
0 to 14 dB automatic (AGC) / 0 dB fixed
Measuring window AIT and AGC:
whole field or spot (about 10% in image center), switchable
Gamma:
0.45
Digital edge enhancement:
high / low switchable
White set:
set / lock / manual
Serial control via RS 232**
Basic version: AIT, AGC, gamma, edge enhancement, white set, backlight compensation, integration, image mirror, etc.
Synchronization:
Internal, optional external synchronization (composite video)
Serial control via RS 232**:
LG module: Line generator for two reticles DRE module: Dynamic Range Enhancement
Additional Functions with CF 15 MX**
General Power supply:
CF 15 MX and CF 15 DSP: 12 V DC / 3.5 W CF 15 RGB: 12 V DC / 4 W
Connections:
KAPPA CSI (Camera System Interface) optional control output for lenses with motor iris (0.7 Vss , 10 KΩ)
Operating temperature:
-10°C to +45° C
Relative Humidity:
10 % to 90 %, non-condensing
Lens mount:
C-mount, focal plane adjustable
Filter:
optical low pass and infrared blocking filter, not removable
Housing dimensions:
73 x 50 x 148 [mm]
Weight:
400 g
Standard equipment:
camera, operating manual, software for serial control (RS 232) and appropriate control cable on request
Order no.:
CF 15 MX (LG + DRE): 961-1177 / CF 15 DSP: 961-1145 / CF 15 RGB: 961-1139
*
other sensors (1/3”, 1/4”) available
**
Information about additional functions and detailed interface description available on request. Optional
Integration into the modular software package KAPPA ImageBase (KIB) via PCI bus frame grabber We are constantly checking the accuracy of the technical data. We are prepared to provide more detailed information on request.
Technical data are subject to change without notice!
KAPPA opto-electronics GmbH Kleines Feld 6 D-37130 Gleichen Fon +49 / 5508 / 974-0 Fax +49 / 5508 / 974-100 e-Mail
[email protected] Internet www.kappa-vision.com
08/02
TECHNICAL SUPPORT Fon +49 / 180 5 371 371 Fax +49 / 5508 974-189 e-Mail
[email protected]
KAPPA opto-electronics Inc. 911 S. Primrose Ave., Unit P Monrovia, CA 91016 USA Fon +1-626-256-4343 Fax +1-626-256-6484 e-Mail
[email protected] Internet www.kappa-vision.com
