Transcript
Features
• Universal AC Input (85-264VAC) • Long 7 Year Warranty • Protections: SCP, OVP, OCP, OLP, OTP • 100% Full Load burn-in test • DC OK Indicator LED (optional with relay output) • cooling by free air convection, 5000m operation • UL, CSA & CE certified with CB Report
Description This DIN-rail mounted power supply uses high reliability components to give a long, trouble-free life. The power supply can be end mounted to save space or side mounted for use in low-profile cabinets. Relay contacts simplifyand the units can be deliver 60W start-up power. The REDIN series is fully certified for industrial use and carries a 7-year warranty.
Selection Guide
AC/DC Converter
REDIN45 45 Watt DIN-Rail Power Supply
YEA R
7
wa
rranty
Part Input Output Output Rated Efficiency Number Voltage Range Voltage Trimming Voltage Current typ. (VAC) (VDC) (VDC) (mA) (%) REDIN45-12 85-264 12 12-15 3.75 84 REDIN45-24 85-264 24 24-28 1.875 86 * add suffix /NR for versions without relay
Specifications (measured at TA= 25°C, 230VAC, rated load) BASIC CHARACTERISTICS Parameter
Condition
Min.
Input Voltage Range
all operating conditions
85VAC 120VDC
max. Input Voltage
max. 1 second
Output Voltage Adjustment (Factory Setting) (1)
Typ.
Max. 264VAC 250VDC 300VAC 375VDC
12Vout 24Vout
12-15VDC (12V±5%) 24-28VDC (24V±5%)
Input Current
full load, 115VAC full load, 230VAC
1.35A 0.75A
Inrush Current
cold start at 25°C, 115VAC cold start at 25°C, 230VAC
40A 60A
standard (with Relay) /NR option (no Relay)
<1000mW <500mW
No Load Power Consumption Leakage Current
240VAC
<1.0mA
Start Up time
cold start, 230VAC
500ms
Rise time
cold start, 230VAC
20ms
Hold-up time
full load, 115VAC full load, 230VAC
20ms 50ms
Input Frequency
47kHz
Efficiency
CB-Report UL-60950-1 Certified UL-508 Certified IEC-60950-1 Certified EN-60715 Compliant EN-50022 Compliant CSA C22.2 No. 60950-1-07 Certified
63kHz see Selection Guide
Output Ripple and Noise (2) Over Load Notes: Note1: Note2:
1000ms
E314885
12Vout 24Vout all operating conditions
60mVp-p 75mVp-p 140% for 5 seconds max.
For more details refer to Vadj. Derating Graph Ripple and Noise are measured at 20MHz bandwidth by using a 12” twisted pair-wire terminated with 0.1µF & 47µF parallel capacitor.
continued on next page
Refer to Applications Notes www.recom-international.com
REV.: 0/2015
PA-1
REDIN45 AC/DC Converter
Series
Specifications (measured at TA= 25°C, 230VAC, rated load) Efficiency vs. Load
REDIN45-24
Efficiency (%)
Efficiency (%)
90 80 70 60 50 40 30 20 10 0
REDIN45-12
85VAC 115VAC 230VAC 264VAC 0
1
3
2
3.75
90 80 70 60 50 40 30 20 10 0
85VAC 115VAC 230VAC 264VAC 0
0.5
Load (A)
1.5
1
1.875
Load (A)
100 90 80
Load (%)
70 60
100 80
45W max.
80
12VDC
70 Vadj. 15 (28)
60
Output Voltage (V) 50
40 30
40 30
REGULATION 20
20
Parameter 10
Condition
Line Regulation 0 -20 Load Regulation Transient Response
24VDC
90
12VDC 12 (24)
50
100
24VDC
Load (%)
Output Current (%)
Vadj. Derating
-10
10
30
50
0 -20
70
Value
10
±0.1 typ. / ±1% max. -10
Ambient Temperature (°C) 12Vout (step load change: 1.875A - 3.75A)
(3)
24Vout (step load change: 0.937A - 1.875A) Derating: 3W / 1000m or 5°C / 1000m Notes: Note3:
Parameter
Condition
Short Circuit Protection (SCP) 3000
Ta= 50°C Hiccup
Over Voltage Protection (OVP)
12Vout 24Vout
2000 Over Current Protection (OCP)
Over Temperature Protection (OTP)
Isolation Resistance Power OK LED PA-2
20
40
50 70 max. ±0.1 typ. / ±1%
Ambient Temperature (°C)
±5% typ. ±5% typ. 100Hz & 1kHz 50% duty 0.5A / µs Derating: 1.5W / 1000m or 5°C / 1000m Ta= 55°C
5000
4000 PROTECTION
Isolation Voltage
30
35°Cloading 3300µF. Other specs with resistive load only. Transient Response Ta= + E-CAP
Altitude (m)
5000
Altitude (m)
Dwell Time Slew Rate
10
detect on inside ambient I/P to O/P 100 I/P to FG Load (%) O/P to FG 500VDC, 70% RH, I/P to O/P; I/P to FG; O/P to FG 60
80
Relay Contacts LED/Relay
4000
Value auto-recovery fault condition Ta=after 40°C 18VDC max., shut-down latch-off o/p voltage, re-power on to recover 35VDC max., shut-down latch-off o/p voltage, re-power on to recover 2000 150% typ., auto-recovery after fault condition 3000
105°C±5%, shut-down latch-off o/p voltage, re-power on to recover 20
40
60
Load (%)
3.75kVAC / 1 minute 80 100 1.88kVAC / 1 minute 0.5kVAC / 1 minute 100MW min.
1A, 30VDC / 120VAC ON if Vout = 11-16V (12V) / 22-30V (24V) REV.: 0/2015
www.recom-international.com
REDIN45 AC/DC Converter
Series
Specifications (measured at TA= 25°C, 230VAC, rated load) ENVIRONMENTAL Parameter
Condition
Value
Operating Temperature Range
with derating
-20°C to +70°C (see graph)
Storage Temperature Range
-30°C to +85°C
Operating Humidity
non-condensing
20% - 90%RH
Storage Humidity
10% - 90% RH
Vibration
10-500Hz 2G, 60min.
Shock
3 times each axis
10G / 11ms, along X, Y and Z axis
Altitude
see derating graph
5000m
MTBF (+25°C)
MIL-HDBK-217F, 115VAC, 60Hz, 75% load
200 x 10³ hours
Design Lifetime (+40°C)
87.6 x 10³ hours
Derating Graph Vin ≤ 100VAC Vin ≤100VAC
> 100VAC VinVin>100VAC
100 90
80
24VDC 12VDC
Load (%)
Vin ≤100VAC12VDC
70 100 60
-10
10
30
50
70
Temperature (°C)
20
24VDC
90 50 80 40 70 30 60 20 50 10 40 0 30-20
12VDC
-10
10
30
50
70
50
70
Temperature (°C)
10 10
30
Temperature (°C)
5000
50
REDIN60-24
(45W)
50°C (45W)
4000 2000 3000 60
80
20
40
60
www.recom-international.com
(45W)
4000 2000 3000 40
60
80
100
80
100
Load (%)
20
Load (%)
(45W)
40°C
20
100
40°C
35°C 5000 3000
2000
80
35°C
4000
100
Load (%)
2000
30
5000
50°C
35°C
40
10
Temperature (°C)
4000
20
-10
35°C
REDIN60-12
5000 3000
0 -20
70
Altitude (m) Altitude (m)
-10
Typical Characteristics
Altitude (m) Altitude (m)
Vin >100VAC12VDC
70 100 60
20
10 0 -20
24VDC
90
Load (%)
Load (%)
Load (%)
80
90 50 80 40 70 30 60 20 50 10 40 0 30-20
100
24VDC
40
60
Load (%) REV.: 0/2015
PA-3
REDIN45 AC/DC Converter
Series
Specifications (measured at TA= 25°C, 230VAC, rated load) SAFETY AND CERTIFICATIONS Certificate Type
Report / File Number
Standard
UL General Safety E224736
UL-60950-1, 2nd Edition UL-508 UL-1310 C22.2 No. 60950-1-07, 2nd Edition
IEC/EN General Safety
E224736
IEC/EN-60950-1, 2nd Edition
Chinese Safety Standard
E224736
GB 4943.1-2011
Certificate Type (Environmental)
Condition
Standard / Criterion
CSA
EMI Standard
EN-55011, Class B EN-55022, Class B EN55024 FCC, Class B
ESD Radiated Immunity Fast Transient Surge Conducted Immunity Power frequency magnetic field immunity test Noise Immunity
EN-61000-4-2, Criteria A EN-61000-4-3, Criteria A EN-61000-4-4, Criteria A EN-61000-4-5, Criteria A EN-61000-4-6, Criteria A EN-61000-4-8, Criteria A EN-61000-4-11, Criteria A EN-61000-4-11, Criteria B EN-61000-4-11, Criteria B EN-61000-3-2 EN-61000-3-3
±8kV Contact & Air Discharge 10V/m, 80-3000MHz, 80% AM at 1kHz Level 2 ±2kV / L-N, ±4kV / L, N-FG 10Vrms, 0.15-80MHz, 80% AM at 1kHz
Harmonic Immunity Voltage Flicker
40% reduction, 200ms 70% reduction, 500ms 90% reduction, 5s not applicable input below 75W
DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter
Type
Value
Case Material
UL94V-0 plastic
Dimensions (WxHxD)
92.0 x 45.1 x 101.2m
Weight
332g
Packaging Dimensions (LxWxH)
Cardboard Box
Packaging Quantity
310 x 252 x 285mm
Carton
30pcs
Mechanical Dimensions
92.0
101.2
Front Side
45.1 continued on next page PA-4
REV.: 0/2015
DIN-RAIL mounting bracket
www.recom-international.com
Front Side
REDIN45
AC/DC Converter
Series
45.1
Specifications (measured at TA= 25°C, 230VAC, rated load) Mechanical Dimensions
DIN-RAIL mounting bracket (75mm) included 7.5±0.2
75±0.3 6.3±0.2 35±0.1
25.0
18±0.2
1±0.05
25.0
END MOUNTING
SIDE MOUNTING
Front Side
End Latch Release
Side Latch Release
Tolerance: ±0.5mm
Mounting Instruction Releasing
Mounting
1
Front Side
Front Side
2
2 „Click“
1 continued on next page www.recom-international.com
REV.: 0/2015
PA-5
REDIN45 AC/DC Converter
Series
Specifications (measured at TA= 25°C, 230VAC, rated load) Mounting Multiple Power Supplies
0mm
0mm
no spacers between supplies required Functional Diagram
L N
T2.5A Input Filter
Power Stage
E
+V
Output Filter
-V DC
Relay
OTP ShutDown
Protection
OCP Limit
OVP ShutDown
OK
LED
Outoput Voltage Regulation
Vadj.
The product information and specifications are subject to change without prior notice. All products are designed for non-safety critical commercial and industrial applications. The buyer agrees to implement safeguards that anticipate the consequences of any failures that might cause harm, loss of life and/or property damage. PA-6
REV.: 0/2015
www.recom-international.com
