Transcript
monogram.com
Refrigeration modules Double-drawer refrigerator
Fresh-food refrigerator general features Temperature control. Digital touch controls offer a range of temperatures for precise chilling of a variety of fresh foods and beverages, and an LED display allows easy viewing of temperatures.
Flexible installation. Both the right-hand and left-hand door swing models stand beautifully on their own, or may be built into cabinetry. Models ZIFI240PII and ZIFI240PLII accept a custom 3/4" panel and handle for a personalized look.
Fresh-food ZIBS240PSS Head On refrigerator
Bar refrigerator ZIBS240PSS Head On with icemaker
Bar refrigerator with icemaker general features
Right-hand door swing ZIFS240PSS—Stainless steel ZIFI240PII—Custom panel
ZIBS240PSS—Stainless steel ZIBI240PII— Custom panel
Automatic icemaker. Self-contained icemaker features a removable ice bin on full-extension slides and a heavy-duty ice scoop for serving convenience.
Left-hand door swing ZIFS240PLSS—Stainless steel ZIFI240PLII—Custom panel
Flexible installation. The free-standing bar refrigerator stands beautifully on its own, or may be built into cabinetry. Model ZIBI240PII accepts custom 3/4" panel and handle for a personalized look. For additional details on product installation, warranty coverage, care and maintenance, visit monogram.com.
Advance planning for fresh-food refrigerator and bar refrigerator with icemaker
• Built-in or free-standing installation • Factory-installed black toekick; stainless toekick included • Trimmed model designed to be customized with custom panel and handle • Right-hand or left-hand door swing models for installation flexibility
Overall dimensions* (WxHxD in inches): 23-3/4 x 34-1/4 - 34-3/4" x 23-3/4 Amps @120 Volts 15 Approx. shipping wt. (lbs.) 126 • Built-in or free-standing installation • Factory-installed black toekick; stainless toekick included • Trimmed model designed to be customized with custom panel and handle • Right-hand door swing only
O u t d o o r/ i n d o o r refrigerator
Storage convenience. Beverage shelf on full-extension slides holds up to five wine bottles or ten 12-oz. cans, while spillproof glass shelves provide ample space for fresh foods and beverages.
Overall dimensions* (WxHxD in inches): 23-3/4 x 34-1/4 - 34-3/4" x 23-3/4 Amps @120 Volts 15 Approx. shipping wt. (lbs.) 126
ZIFS240PSS
W ine re ser ve, wine chiller b everage center
Temperature control. Digital touch controls allow a range of temperature settings for different cooling needs, and an LED display makes settings clearly visible.
ZIFS240PSS
Fr e s h - f o o d r e f r i g e r a t o r bar refrigerator
Storage convenience. Removable, spillproof glass shelves, along with a QuickSpace™ shelf and a clear Lexan® crisper on full-extension slides, provide easy access to contents.
*Height excluding legs, including hinge; depth excluding handle
The installation space The Monogram fresh-food refrigerator and bar refrigerator with icemaker may be installed beneath a countertop or can be used free-standing. • If installing between frameless cabinets, a 1/2"-wide filler strip or side panel may be required. The filler strip will act as a spacer between the door case and adjacent cabinet and will prevent interference with cabinet door swing. The width of the opening must include filler panels. Note: When installed, the stainless steel models ZIFS240PSS and ZIBS240PSS will be flush with adjacent cabinetry. If installing between frameless cabinets, a 1/2"-wide filler strip or side panel may be required to prevent interference with cabinet door swing. Models ZIFI240PII and ZIBI240PII will project forward 1-3/4" of adjacent 24"-deep cabinets.
34-1/2" to 35"
Locate Outlet 10-1/2" Water and 24" Min. Electrical 9" Locations Max. 23-3/4" Stainless Steel Models 1/2" 24-7/8" Framed Models 1-1/2" 23-3/4" Min. Depth Including Handle: 26" Stainless Steel Models Only
34-1/4" - 34-3/4"
23-3/4"
113
Advance planning for fresh-food refrigerator and bar refrigerator with icemaker Location requirements All Monogram® refrigeration modules may be closed in on the top and sides as long as the front is unobstructed for air circulation and door swing. • Do not install these products where the temperatures will go below 55°F (13°C) or above 90°F (32°C). • Do not install where they will be subject to direct sunlight, heat or moisture. • These products are not designed to be stacked one over the other. Electrical A 120V, 60HZ., 15- or 20-amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall of the installation location. See cutout illustration. Note: GFCI (ground fault circuit interrupter) is not recommended.
Water line Bar refrigerators are equipped with an automatic icemaker. The water line can enter an opening in the back wall or floor as shown in the cutout illustration. Route GE SmartConnect™ kit or 1/4" O.D. copper tubing between the cold water line and the water connection location. The installation of an easily accessible shut-off valve in the water line is required.
3/4" custom panels for fresh-food refrigerator and bar refrigerator with icemaker A field-installed overlay door panel is required for model
3/4" custom panels for ZIFI240 and ZIBI240 refrigerators. fresh food and bar refrigerator • 3/4" The overlay panel must be custom panels forsecured to a 1/4"-thick backer panel that slides into the door trim. A 0.10"-thick spacer panel fresh food and bar refrigerator must be placed between the overlay and backer panel.
•C ustom handles of your choice must be installed onto the assembled overlay panel. Overlay Panel Overlay Panel
Door
Door 1/4" Backer Panel 1/4" Backer Panel
Spacer Panel Backer Panel .10 Inch Spacer
Backer Panel
.10 Inch Spacer
B
A (width) 23-3/16" 22-1/2" 23-5/8"
Maximum assembled panel weight is 25 pounds.
B (height) 29-9/16" 29-1/16" 30"
B A
Make the most of your kitchen space with two Monogram refrigeration modules installed together.
•C enter spacer panel on the backer panel, left to right, and top to bottom. Secure the panels with glue.
• Products must operate from separate properly grounded receptacles.
•C enter the spacer/backer panel on the overlay panel. Secure Route with glue and screws. for hinge Countersink all screws.
A
clearance
Custom 3/4 panel hinge routing Route
When installed in a corner: • Allow the minimum door swing clearances shown. The use of a custom panel and custom handle influences the minimum clearances required. • The minimum clearance shown at 90° will allow full extension of drawers and shelves. Right-hand door swing shown. Allow the same clearances for left-hand fresh-food models on the opposite side.
A Minimum to Wall
110° Door Swing
90° Door Swing
21-5/8"
90° B Minimum to Wall
114
Models ZIFS240 / ZIBS240 ZIFI240 / ZIBI240
Top view for hinge Use a 3/4" router bitclearance to cut a notch into the back side of the of Top the notch 3/4" deep, assembled3/4 panel3/8for hinge clearance. Cut overlay view custom Right3/8" forward of the back 7/8" wide and side. Front Front panelof side 3/8 overlay view custom 3/8 ofRight Front Front panel side overlay view custom Route 7/8 3/8 panelof for hinge overlay clearance Note: Right-hand custom Route 7/8 models panel forillustrated. hinge Cut notches on the clearance opposite side for left-hand door swing.
23-5/8" 110°
A B 14" 4" 16" 4-1/2"
1/4" .10 I Backer Spa Panel 1/4" . Backer Panel
A
12-1/2 lbs. max A
12-1/2 lbs.
12-1/2 lbs. max
Assemble overlay panels with glue and screws.
All Monogram refrigeration modules are factory set for a 110° door swing.
O
Door
3/4" overlay panel dimensions (in inches) 1/4" backer 0.10" spacer 3/4" overlay
Over Pan Door
Overlay Panel Spacer Panel
Overlay Panel
Side -by-side installation
Door swing clearances
3/4" custom double draw 3/4" cust double d
The serial plate is located on the inside ceiling of the fresh-food refrigerator, and on the left wall below the ice compartment of the bar refrigerator.
1/4" G 12-1/2 lbs.
1/
