Preview only show first 10 pages with watermark. For full document please download

Relay Sockets With Miniature Switching Relay

   EMBED

Share

Transcript

Safety relay (2 changeover contacts) with force-guided gold contacts (Type A) and status indication Nominal input voltage VN 24 VDC Similiar to picture Notes: • Safe isolation between coil and contacts per DIN EN 50178 • A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for safe isolation. • Inductive loads have to be attenuated by an appropriate protective circuit in order to protect relay coils and contacts. Description VN IN Item No. Pack. Unit Relay socket with miniature switching relay, for DIN 35 rail 24 VDC 30 mA 788-906 1 Technical Data Accessories see pages 50 … 55 Coil: Input voltage range Contacts: Contact material Max. continuous current Max. switching voltage Recommended minimum load Pull-in/drop-out/bounce time typ. Mechanical life General specifications: Nominal voltage to EN 60664-1 Dielectric strength, contact-coil (AC, 1 min) Dielectric strength contact-contact (AC, 1 min) Ambient operating temperature at VN Storage temperature Dimensions (mm) W x H x L Wire connection Cross sections Strip length Standards/specifications WAGO Kontakttechnik GmbH & Co. KG Subject to design changes 20.04.2015 VN -15 % ... +10 % AgNi10 + Au 0.3 A 60 V 0.1 V / 1 mA / 1 mW 15ms / 12ms / 50 x 106 switching operations 250 V / 4 kV / 2 4 kVrms 2.5 kVrms -25 °C … +55 °C -40 °C … +70 °C 15 x 54 x 86 Height from upper-edge of DIN 35 rail Push-in CAGE CLAMP® 0.34 mm² … 2.5 mm² / AWG 22 … 12 9 … 10 mm / 0.35 … 0.39 in EN 61140, EN 60664-1, EN 61810-5, EN 50205, UL 508 (max. 40 °C) Postfach 2880 - D-32385 Minden Hansastr. 27 - D-32423 Minden Tel.: +49(0)571/887-0 E-Mail: [email protected] Fax: +49(0)571/887-169 www.wago.com